Jump to content
RemedySpot.com

Re: RADAR HELP!

Rate this topic


Recommended Posts

Guest guest
Posted

Ok Added info. I just found out that Radar is at 77ghz. no way will the faraday

canopy protect me at that. Nor will the Argen mesh. SO WHAT WILL?

kRIS

________________________________

From: K <kfarming@...>

Sent: Wed, April 14, 2010 10:35:07 PM

Subject: RADAR HELP!

Ok, So I am getting more and more sensitive to the military RADAR as well as

obtaining new symptoms even from commercial jets. this stabbing pain into my

chest and out through my mid back. The Heavy duty faraday canopy is not

shielding me good enough anymore.

What do I do?

Kris

Guest guest
Posted

> Ok Added info. I just found out that Radar is at 77ghz. no way will the

> faraday canopy protect me at that. Nor will the Argen mesh. SO WHAT

> WILL?

Have you tried a Quantum Pro?

Marc

Guest guest
Posted

no I haven't. What will that do?

Kris

________________________________

From: Marc <marc@...>

Sent: Thu, April 15, 2010 2:59:11 PM

Subject: Re: RADAR HELP!

> Ok Added info. I just found out that Radar is at 77ghz. no way will the

> faraday canopy protect me at that. Nor will the Argen mesh. SO WHAT

> WILL?

Have you tried a Quantum Pro?

Marc

------------------------------------

Guest guest
Posted

> no I haven't. What will that do?

Well, Diane/Evie and I both have noticed that it makes EMF coming into

your house from the outside more tolerable. It is not " shielding " ,

but rather is doing " something " to the local environment that negates

the negative reaction that people have to EMF. That " something "

has to do with Quantum coherence.

And if it doesn't help, it has a money back guarantee. :-)

http://quantumproducts.com/catalog/quantum_pro.html

Marc

Guest guest
Posted

Hi, Kris,

 

I don't know if the Quantum Pro will help with your problems, but it does seem

to keep frequencies from the outside, out of my house, to a large degree.  I

still have had to shield windows or I can feel a difference there, tho.  And

everyday at 3pm, something gets worse at that house which I assume is coming

from outside, and I can feel the change (now understand, I, like Marc, am much

better es-wise and tho I can still " feel " changes, these do not make me ill as

they did before).  However, if I either sit next to the Q Pro or move it closer

to me at 3pm, the up-tick in frequencies seems to go away.  It is worth a try

and, as Marc said, it has a reliable return policy.

 

I hope it helps you,

Diane

 

From: Marc <marc@...>

Subject: Re: RADAR HELP!

Date: Thursday, April 15, 2010, 6:37 PM

 

> no I haven't. What will that do?

Well, Diane/Evie and I both have noticed that it makes EMF coming into

your house from the outside more tolerable. It is not " shielding " ,

but rather is doing " something " to the local environment that negates

the negative reaction that people have to EMF. That " something "

has to do with Quantum coherence.

And if it doesn't help, it has a money back guarantee. :-)

http://quantumprodu cts.com/catalog/ quantum_pro. html

Marc

Guest guest
Posted

so are you saying when the jets are flying then I need to sit by the quantum

pro? Should I still be under my canopy at the time?

Kris

________________________________

From: Evie <evie15422@...>

Sent: Thu, April 15, 2010 7:39:49 PM

Subject: Re: RADAR HELP!

Hi, Kris,

I don't know if the Quantum Pro will help with your problems, but it does seem

to keep frequencies from the outside, out of my house, to a large degree. I

still have had to shield windows or I can feel a difference there, tho. And

everyday at 3pm, something gets worse at that house which I assume is coming

from outside, and I can feel the change (now understand, I, like Marc, am much

better es-wise and tho I can still " feel " changes, these do not make me ill as

they did before). However, if I either sit next to the Q Pro or move it closer

to me at 3pm, the up-tick in frequencies seems to go away. It is worth a try

and, as Marc said, it has a reliable return policy.

I hope it helps you,

Diane

From: Marc <marc@...>

Subject: Re: RADAR HELP!

Date: Thursday, April 15, 2010, 6:37 PM

> no I haven't. What will that do?

Well, Diane/Evie and I both have noticed that it makes EMF coming into

your house from the outside more tolerable. It is not " shielding " ,

but rather is doing " something " to the local environment that negates

the negative reaction that people have to EMF. That " something "

has to do with Quantum coherence.

And if it doesn't help, it has a money back guarantee. :-)

http://quantumprodu cts.com/catalog/ quantum_pro. html

Marc

Guest guest
Posted

> so are you saying when the jets are flying then I need to sit by the

> quantum pro? Should I still be under my canopy at the time?

I don't think anyone can accurate predict how much protection you

will need -- you just need to try it out and see!

Marc

Guest guest
Posted

Hi Kris,

 

<so are you saying when the jets are flying then I need to sit by the quantum

pro? Should I still be under my canopy at the time?>

 

I wasn't actually aware when I wrote this that you were talking about radar from

a jet flying by.  I thought you were talking about radar from an airport

terminal.  So I was suggesting that you could add protection by sitting (or

standing) by the Q Pro, or moving it closer to where you were working, or into

your bedroom when you are in bed under your canopy.

 

Actually, I personally doubt the Q Pro will help you with jet radar (tho it

might still be worth the try) because my experience is there is a lag in

protection-- when outside frequencies heighten, it takes sometimes a few minutes

for the device to remediate them.

Diane

From: Marc <marcufoseries (DOT) com>

Subject: Re: RADAR HELP!

groups (DOT) com

Date: Thursday, April 15, 2010, 6:37 PM

> no I haven't. What will that do?

Well, Diane/Evie and I both have noticed that it makes EMF coming into

your house from the outside more tolerable. It is not " shielding " ,

but rather is doing " something " to the local environment that negates

the negative reaction that people have to EMF. That " something "

has to do with Quantum coherence.

And if it doesn't help, it has a money back guarantee. :-)

http://quantumprodu cts.com/catalog/ quantum_pro. html

Marc

Guest guest
Posted

PUK replies - another way of looking at it would be to research how the

military would try to deflect radar signals from the enemy, alas I think we

are talking stealth tech here, but you should be able to protect yourself by

reflection, with aluminium structure ? get an old car and convert it to be

in your living room, now that would be cool. obviously no engine etc,

esheilded windows etc...

In a message dated 16/04/2010 01:40:01 GMT Daylight Time,

evie15422@... writes:

Hi, Kris,

I don't know if the Quantum Pro will help with your problems, but it does

seem to keep frequencies from the outside, out of my house, to a large

degree. I still have had to shield windows or I can feel a difference there,

tho. And everyday at 3pm, something gets worse at that house which I assume

is coming from outside, and I can feel the change (now understand, I, like

Marc, am much better es-wise and tho I can still " feel " changes, these do

not make me ill as they did before). However, if I either sit next to the

Q Pro or move it closer to me at 3pm, the up-tick in frequencies seems to

go away. It is worth a try and, as Marc said, it has a reliable return

policy.

I hope it helps you,

Diane

From: Marc <_marc@..._ (mailto:marc@...) >

Subject: Re: RADAR HELP!

_@..._ (mailto: )

Date: Thursday, April 15, 2010, 6:37 PM

> no I haven't. What will that do?

Well, Diane/Evie and I both have noticed that it makes EMF coming into

your house from the outside more tolerable. It is not " shielding " ,

but rather is doing " something " to the local environment that negates

the negative reaction that people have to EMF. That " something "

has to do with Quantum coherence.

And if it doesn't help, it has a money back guarantee. :-)

_http://quantumprodu_ (http://quantumprodu/) cts.com/catalog/

quantum_pro. html

Marc

[Non-text portions of this message have been removed]

Guest guest
Posted

> Actually, I personally doubt the Q Pro will help you with jet radar (tho

> it might still be worth the try) because my experience is there is a lag

> in protection-- when outside frequencies heighten, it takes sometimes a

> few minutes for the device to remediate them.

Yes, there is a lag with the Quantum Pro, which does make it work better

(I think) for a constant source of EMF, however, I still think that if

one is being exposed to a variety of forms of EMF (which everyone is),

that if you can help with some forms of EMF, then your sensitivity to

other sources is reduced.

Marc

Guest guest
Posted

no see I live in a fly zone where the military air guard practice their

maneuvers and runs. There will be one or two to five or six of them at a time.

circling, diving, " swishing and Swooshing " (if you know what I mean.)

They fly just under the sound barrier, sometimes they break it. They fly at

6000 ft. most commercial jets fly at 30,000 ft. I am getting sensitive enough

that now the commercial jets are hurting me too. This is what I need protection

from. The military will fly around 10:00 am til 11:30 then again at 2:00-5:00

Tues thru Fri. Then they will have guard weekends where they will fly Sat and

Sun and also their nighttime practice runs that can be whenever.

I live 20 minutes from the border of the fly zone. I've tried driving out of

the zone to see if that helps but b/c I am now being sensitive to the commercial

jets that doesn't work b/c the commercial jets then are rerouted around the

active fly zone, plus the exposures to more high power lines, cell phones and

their towers, etc......

Kris

________________________________

From: Evie <evie15422@...>

Sent: Fri, April 16, 2010 12:24:05 AM

Subject: Re: RADAR HELP!

Hi Kris,

<so are you saying when the jets are flying then I need to sit by the quantum

pro? Should I still be under my canopy at the time?>

I wasn't actually aware when I wrote this that you were talking about radar from

a jet flying by. I thought you were talking about radar from an airport

terminal. So I was suggesting that you could add protection by sitting (or

standing) by the Q Pro, or moving it closer to where you were working, or into

your bedroom when you are in bed under your canopy.

Actually, I personally doubt the Q Pro will help you with jet radar (tho it

might still be worth the try) because my experience is there is a lag in

protection-- when outside frequencies heighten, it takes sometimes a few minutes

for the device to remediate them.

Diane

From: Marc <marcufoseries (DOT) com>

Subject: Re: RADAR HELP!

groups (DOT) com

Date: Thursday, April 15, 2010, 6:37 PM

> no I haven't. What will that do?

Well, Diane/Evie and I both have noticed that it makes EMF coming into

your house from the outside more tolerable. It is not " shielding " ,

but rather is doing " something " to the local environment that negates

the negative reaction that people have to EMF. That " something "

has to do with Quantum coherence.

And if it doesn't help, it has a money back guarantee. :-)

http://quantumprodu cts.com/catalog/ quantum_pro. html

Marc

Guest guest
Posted

Yes, that is the biggest EMF issue I have where I am living. We're taking care

of the stray voltage issues in this 1902 house. We live in the country and the

cell phone tower is 4 miles south of us with our town in between. Any high

powered lines are also 3-4 miles east of us. We live in kind of a draw of sorts

with mainly hayland and pasture surrounding us.

I feel the symptoms before I hear them flying overhead. Then usually I would

get under my heavy duty faraday canopy as quick as I could. Last fall that would

be all I needed to do. Now, it's not working. I am chemically sensitive so I

shy away from paint. We are in the process of building a travel trailer in

order to be a safe and protective living space. However the mesh we were going

to use will not shield me from this. We have the exterior done. It's steel

however We know there are shielding leaks b/c of the way the strips of steel

went on. We were depending on the interior shielding to do the trick.

Exactly, I need a material that will absorb or shield me from it. I was

educated yesterday by the lessemf.com guys that radar is at 77 ghz. They don't

have any material that's been tested for this level of EMF. Yes they fly twice a

day 5-6 days a week, not always in my area but very often. I live close(15

miles) from a major river that they like to use for practice.

Kris

________________________________

From: " paulpjc@... " <paulpjc@...>

Sent: Fri, April 16, 2010 5:14:46 AM

Subject: Re: RADAR HELP!

PUK replies -

Is the radar from the jets the prime EMR agitant in your vicinity ? I

guess that a regular dose of the same emr is bad as your ES will all too

quickly recognise this, is there no way you can set up an early warning system

and then seek cover ? You need to ascertain what materiel will absorb the

radar - you probably need a microwave painted shelter that you can stand in,

but of course the whole thing will be impractical as I suppose the jets fly

over frequently ?

In a message dated 16/04/2010 06:26:12 GMT Daylight Time,

evie15422@... writes:

so are you saying when the jets are flying then I need to sit by the

quantum pro? Should I still be under my canopy at the time?

Kris

Guest guest
Posted

so then align my walls with solid aluminum? How thick? where could I get such

stuff like the aluminum and eshielded windows?

I still get the same symptoms but worse while in my van than under the canopy.

Kris

________________________________

From: " paulpjc@... " <paulpjc@...>

Sent: Fri, April 16, 2010 5:19:51 AM

Subject: Re: RADAR HELP!

PUK replies - another way of looking at it would be to research how the

military would try to deflect radar signals from the enemy, alas I think we

are talking stealth tech here, but you should be able to protect yourself by

reflection, with aluminium structure ? get an old car and convert it to be

in your living room, now that would be cool. obviously no engine etc,

esheilded windows etc...

In a message dated 16/04/2010 01:40:01 GMT Daylight Time,

evie15422@... writes:

Hi, Kris,

I don't know if the Quantum Pro will help with your problems, but it does

seem to keep frequencies from the outside, out of my house, to a large

degree. I still have had to shield windows or I can feel a difference there,

tho. And everyday at 3pm, something gets worse at that house which I assume

is coming from outside, and I can feel the change (now understand, I, like

Marc, am much better es-wise and tho I can still " feel " changes, these do

not make me ill as they did before). However, if I either sit next to the

Q Pro or move it closer to me at 3pm, the up-tick in frequencies seems to

go away. It is worth a try and, as Marc said, it has a reliable return

policy.

I hope it helps you,

Diane

From: Marc <_marc@..._ (mailto:marc@...) >

Subject: Re: RADAR HELP!

_@..._ (mailto: )

Date: Thursday, April 15, 2010, 6:37 PM

> no I haven't. What will that do?

Well, Diane/Evie and I both have noticed that it makes EMF coming into

your house from the outside more tolerable. It is not " shielding " ,

but rather is doing " something " to the local environment that negates

the negative reaction that people have to EMF. That " something "

has to do with Quantum coherence.

And if it doesn't help, it has a money back guarantee. :-)

_http://quantumprodu_ (http://quantumprodu/) cts.com/catalog/

quantum_pro. html

Marc

[Non-text portions of this message have been removed]

Guest guest
Posted

K wrote:

> I was educated yesterday by the lessemf.com guys that radar is at 77 ghz.

I'll just add, I really feel it when the military jets fly overhead. The

other day I had the Acoustimeter out and was mapping the area up the

hill. I could hear the jet coming on the meter first, then the sound

arrived. Went up to 0.05 V/m. A low number, but it was way up in the sky

and not right overhead. Didn't hurt that far away, not too much.

Anyways, since the meter only goes up to 8GHz, I think it emitted more

than just " radar " .

Are you talking about U.S. planes?

From what you described, I would tend to think there is something more

in your area than just the jets, causing the heightened symptoms.

Guest guest
Posted

Yes I am talking about the National Air guard Jets. I don't know if they are

F-14's or if they're something else. I do know there is more equipment on these

jets.

I only have these symptoms at home when they fly.

I have wondered about infrasound coming off the jets since I will start having

symptoms before I hear them in the area. However, with the commercial airliner

jets, I do associate the jabbing, stabbing chest pain every second until that

jet passes overhead, I would suppose that is from their radar swoop?

What kind of meter is going to measure that high? It's obvious my Electrosmog

meter isn't high enough.

Kris

________________________________

From: S son <sandreas41@...>

Sent: Sat, April 17, 2010 12:26:33 AM

Subject: Re: RADAR HELP!

K wrote:

> I was educated yesterday by the lessemf.com guys that radar is at 77 ghz.

I'll just add, I really feel it when the military jets fly overhead. The

other day I had the Acoustimeter out and was mapping the area up the

hill. I could hear the jet coming on the meter first, then the sound

arrived. Went up to 0.05 V/m. A low number, but it was way up in the sky

and not right overhead. Didn't hurt that far away, not too much.

Anyways, since the meter only goes up to 8GHz, I think it emitted more

than just " radar " .

Are you talking about U.S. planes?

From what you described, I would tend to think there is something more

in your area than just the jets, causing the heightened symptoms.

------------------------------------

Guest guest
Posted

Regular aluminum foil will block 77GHz. Heavy duty might be better, and is

easier to work with. Or a stronger product like astro-foil. At that

frequency it is very much line-of-sight, although there will be some

scattering from small metal objects like nails. I don't know if Y-shield

would help (I think it would, but they have no specs) but I would bet the

copper or aluminum paints would. If you have

a flat roof, you can get an aluminum coating painted on. I think

you'd also have good results with a radiant barrier in an attic.

For windows, you either need very fine mesh (like 200 wires per inch copper

from TWPinc.com) or metallic film (or foil, but then you can't see out).

On Sat, Apr 17, 2010 at 7:16 AM, K <kfarming@...> wrote:

>

>

> Yes I am talking about the National Air guard Jets. I don't know if they

> are F-14's or if they're something else. I do know there is more equipment

> on these jets.

>

> I only have these symptoms at home when they fly.

>

> I have wondered about infrasound coming off the jets since I will start

> having symptoms before I hear them in the area. However, with the commercial

> airliner jets, I do associate the jabbing, stabbing chest pain every second

> until that jet passes overhead, I would suppose that is from their radar

> swoop?

>

> What kind of meter is going to measure that high? It's obvious my

> Electrosmog meter isn't high enough.

> Kris

>

> ________________________________

> From: S son <sandreas41@... <sandreas41%40gmail.com>>

> <%40>

> Sent: Sat, April 17, 2010 12:26:33 AM

>

> Subject: Re: RADAR HELP!

>

> K wrote:

> > I was educated yesterday by the lessemf.com guys that radar is at 77

> ghz.

>

> I'll just add, I really feel it when the military jets fly overhead. The

> other day I had the Acoustimeter out and was mapping the area up the

> hill. I could hear the jet coming on the meter first, then the sound

> arrived. Went up to 0.05 V/m. A low number, but it was way up in the sky

> and not right overhead. Didn't hurt that far away, not too much.

>

> Anyways, since the meter only goes up to 8GHz, I think it emitted more

> than just " radar " .

>

> Are you talking about U.S. planes?

>

> From what you described, I would tend to think there is something more

> in your area than just the jets, causing the heightened symptoms.

>

>

>

> ------------------------------------

>

>

Guest guest
Posted

Well, we had tried the Denny Foil. I chemically reacted to it. This is a

two-story house so painting the attic is impossible since my bedroom is not

under the attic. Plus, I am chemically sensitive and they Y-shield paint has

not been recommended for me with my sensitivities. With that said, would that

copper mesh be a success if I lined the walls, floor, and ceiling of the trailer

besides the windows?

Or would solid aluminum instead of wallboard work and where would I get a

product and how can I attach it/ seal it in the trailer without caulking? In

other words, I have to seal what is in the walls( the insulation) but I am

sensitive to caulk even the " Safe " stuff. We have steel studs about 2 feet apart

and the rafters are 4 feet apart with solid pieces attaching each one.

Kris

________________________________

From: Bill Bruno <wbruno@...>

Sent: Sat, April 17, 2010 11:34:41 AM

Subject: Re: RADAR HELP!

Regular aluminum foil will block 77GHz. Heavy duty might be better, and is

easier to work with. Or a stronger product like astro-foil. At that

frequency it is very much line-of-sight, although there will be some

scattering from small metal objects like nails. I don't know if Y-shield

would help (I think it would, but they have no specs) but I would bet the

copper or aluminum paints would. If you have

a flat roof, you can get an aluminum coating painted on. I think

you'd also have good results with a radiant barrier in an attic.

For windows, you either need very fine mesh (like 200 wires per inch copper

from TWPinc.com) or metallic film (or foil, but then you can't see out).

On Sat, Apr 17, 2010 at 7:16 AM, K <kfarming@...> wrote:

>

>

> Yes I am talking about the National Air guard Jets. I don't know if they

> are F-14's or if they're something else. I do know there is more equipment

> on these jets.

>

> I only have these symptoms at home when they fly.

>

> I have wondered about infrasound coming off the jets since I will start

> having symptoms before I hear them in the area. However, with the commercial

> airliner jets, I do associate the jabbing, stabbing chest pain every second

> until that jet passes overhead, I would suppose that is from their radar

> swoop?

>

> What kind of meter is going to measure that high? It's obvious my

> Electrosmog meter isn't high enough.

> Kris

>

> ________________________________

> From: S son <sandreas41@... <sandreas41%40gmail.com>>

> <%40>

> Sent: Sat, April 17, 2010 12:26:33 AM

>

> Subject: Re: RADAR HELP!

>

> K wrote:

> > I was educated yesterday by the lessemf.com guys that radar is at 77

> ghz.

>

> I'll just add, I really feel it when the military jets fly overhead. The

> other day I had the Acoustimeter out and was mapping the area up the

> hill. I could hear the jet coming on the meter first, then the sound

> arrived. Went up to 0.05 V/m. A low number, but it was way up in the sky

> and not right overhead. Didn't hurt that far away, not too much.

>

> Anyways, since the meter only goes up to 8GHz, I think it emitted more

> than just " radar " .

>

> Are you talking about U.S. planes?

>

> From what you described, I would tend to think there is something more

> in your area than just the jets, causing the heightened symptoms.

>

>

>

> ------------------------------------

>

>

Guest guest
Posted

It is possible if you're that sensitive you'll react to aluminum and/or

copper.

You've tried 100% silicone caulk?

I think Y-shield is pretty tolerable as paints go. You might

discuss with the company as they used to have a powder form

you mix with water. It does smell bad for a day or two, but

not nearly as bad as most paints.

Bill

On Sat, Apr 17, 2010 at 4:54 PM, K <kfarming@...> wrote:

>

>

> Well, we had tried the Denny Foil. I chemically reacted to it. This is a

> two-story house so painting the attic is impossible since my bedroom is not

> under the attic. Plus, I am chemically sensitive and they Y-shield paint has

> not been recommended for me with my sensitivities. With that said, would

> that copper mesh be a success if I lined the walls, floor, and ceiling of

> the trailer besides the windows?

>

> Or would solid aluminum instead of wallboard work and where would I get a

> product and how can I attach it/ seal it in the trailer without caulking? In

> other words, I have to seal what is in the walls( the insulation) but I am

> sensitive to caulk even the " Safe " stuff. We have steel studs about 2 feet

> apart and the rafters are 4 feet apart with solid pieces attaching each one.

> Kris

>

> ________________________________

> From: Bill Bruno <wbruno@... <wbruno%40gmail.com>>

> <%40>

> Sent: Sat, April 17, 2010 11:34:41 AM

>

> Subject: Re: RADAR HELP!

>

> Regular aluminum foil will block 77GHz. Heavy duty might be better, and is

> easier to work with. Or a stronger product like astro-foil. At that

> frequency it is very much line-of-sight, although there will be some

> scattering from small metal objects like nails. I don't know if Y-shield

> would help (I think it would, but they have no specs) but I would bet the

> copper or aluminum paints would. If you have

> a flat roof, you can get an aluminum coating painted on. I think

> you'd also have good results with a radiant barrier in an attic.

>

> For windows, you either need very fine mesh (like 200 wires per inch copper

> from TWPinc.com) or metallic film (or foil, but then you can't see out).

>

> On Sat, Apr 17, 2010 at 7:16 AM, K <kfarming@...<kfarming%40>>

> wrote:

>

> >

> >

> > Yes I am talking about the National Air guard Jets. I don't know if they

> > are F-14's or if they're something else. I do know there is more

> equipment

> > on these jets.

> >

> > I only have these symptoms at home when they fly.

> >

> > I have wondered about infrasound coming off the jets since I will start

> > having symptoms before I hear them in the area. However, with the

> commercial

> > airliner jets, I do associate the jabbing, stabbing chest pain every

> second

> > until that jet passes overhead, I would suppose that is from their radar

> > swoop?

> >

> > What kind of meter is going to measure that high? It's obvious my

> > Electrosmog meter isn't high enough.

> > Kris

> >

> > ________________________________

> > From: S son <sandreas41@... <sandreas41%40gmail.com><sandreas41%

> 40gmail.com>>

> > <%40> <%

> 40>

>

> > Sent: Sat, April 17, 2010 12:26:33 AM

> >

> > Subject: Re: RADAR HELP!

> >

> > K wrote:

> > > I was educated yesterday by the lessemf.com guys that radar is at 77

> > ghz.

> >

> > I'll just add, I really feel it when the military jets fly overhead. The

> > other day I had the Acoustimeter out and was mapping the area up the

> > hill. I could hear the jet coming on the meter first, then the sound

> > arrived. Went up to 0.05 V/m. A low number, but it was way up in the sky

> > and not right overhead. Didn't hurt that far away, not too much.

> >

> > Anyways, since the meter only goes up to 8GHz, I think it emitted more

> > than just " radar " .

> >

> > Are you talking about U.S. planes?

> >

> > From what you described, I would tend to think there is something more

> > in your area than just the jets, causing the heightened symptoms.

> >

> >

> >

> > ------------------------------------

> >

> >

Guest guest
Posted

been looking at this astro-foil. It's like reflectix right? sorry if I sound

dumb. Bad brain fog today.

If we ligned the whole trailer with this reflectix and like you said before use

the 200 woven copper mesh for the windows, I would be quite protected then from

the Radar?

Will this also protect me from the lower frequencies too?

THanks so much,

Kris

________________________________

From: Bill Bruno <wbruno@...>

Sent: Sat, April 17, 2010 11:34:41 AM

Subject: Re: RADAR HELP!

Regular aluminum foil will block 77GHz. Heavy duty might be better, and is

easier to work with. Or a stronger product like astro-foil. At that

frequency it is very much line-of-sight, although there will be some

scattering from small metal objects like nails. I don't know if Y-shield

would help (I think it would, but they have no specs) but I would bet the

copper or aluminum paints would. If you have

a flat roof, you can get an aluminum coating painted on. I think

you'd also have good results with a radiant barrier in an attic.

For windows, you either need very fine mesh (like 200 wires per inch copper

from TWPinc.com) or metallic film (or foil, but then you can't see out).

On Sat, Apr 17, 2010 at 7:16 AM, K <kfarming@...> wrote:

>

>

> Yes I am talking about the National Air guard Jets. I don't know if they

> are F-14's or if they're something else. I do know there is more equipment

> on these jets.

>

> I only have these symptoms at home when they fly.

>

> I have wondered about infrasound coming off the jets since I will start

> having symptoms before I hear them in the area. However, with the commercial

> airliner jets, I do associate the jabbing, stabbing chest pain every second

> until that jet passes overhead, I would suppose that is from their radar

> swoop?

>

> What kind of meter is going to measure that high? It's obvious my

> Electrosmog meter isn't high enough.

> Kris

>

> ________________________________

> From: S son <sandreas41@... <sandreas41%40gmail.com>>

> <%40>

> Sent: Sat, April 17, 2010 12:26:33 AM

>

> Subject: Re: RADAR HELP!

>

> K wrote:

> > I was educated yesterday by the lessemf.com guys that radar is at 77

> ghz.

>

> I'll just add, I really feel it when the military jets fly overhead. The

> other day I had the Acoustimeter out and was mapping the area up the

> hill. I could hear the jet coming on the meter first, then the sound

> arrived. Went up to 0.05 V/m. A low number, but it was way up in the sky

> and not right overhead. Didn't hurt that far away, not too much.

>

> Anyways, since the meter only goes up to 8GHz, I think it emitted more

> than just " radar " .

>

> Are you talking about U.S. planes?

>

> From what you described, I would tend to think there is something more

> in your area than just the jets, causing the heightened symptoms.

>

>

>

> ------------------------------------

>

>

Guest guest
Posted

We've been using Novalink caulk from Chemlink. Even though they claim it's odor

free, I can detect an odor that bothers me until it's painted over. :(

I'll talk to my hubby about the y-shield paint. Still quite skiddish about it

even in powder form. I've been sensitive to the no voc paints too. :(

Kris

________________________________

From: Bill Bruno <wbruno@...>

Sent: Sat, April 17, 2010 6:14:42 PM

Subject: Re: RADAR HELP!

It is possible if you're that sensitive you'll react to aluminum and/or

copper.

You've tried 100% silicone caulk?

I think Y-shield is pretty tolerable as paints go. You might

discuss with the company as they used to have a powder form

you mix with water. It does smell bad for a day or two, but

not nearly as bad as most paints.

Bill

On Sat, Apr 17, 2010 at 4:54 PM, K <kfarming@...> wrote:

>

>

> Well, we had tried the Denny Foil. I chemically reacted to it. This is a

> two-story house so painting the attic is impossible since my bedroom is not

> under the attic. Plus, I am chemically sensitive and they Y-shield paint has

> not been recommended for me with my sensitivities. With that said, would

> that copper mesh be a success if I lined the walls, floor, and ceiling of

> the trailer besides the windows?

>

> Or would solid aluminum instead of wallboard work and where would I get a

> product and how can I attach it/ seal it in the trailer without caulking? In

> other words, I have to seal what is in the walls( the insulation) but I am

> sensitive to caulk even the " Safe " stuff. We have steel studs about 2 feet

> apart and the rafters are 4 feet apart with solid pieces attaching each one.

> Kris

>

> ________________________________

> From: Bill Bruno <wbruno@... <wbruno%40gmail.com>>

> <%40>

> Sent: Sat, April 17, 2010 11:34:41 AM

>

> Subject: Re: RADAR HELP!

>

> Regular aluminum foil will block 77GHz. Heavy duty might be better, and is

> easier to work with. Or a stronger product like astro-foil. At that

> frequency it is very much line-of-sight, although there will be some

> scattering from small metal objects like nails. I don't know if Y-shield

> would help (I think it would, but they have no specs) but I would bet the

> copper or aluminum paints would. If you have

> a flat roof, you can get an aluminum coating painted on. I think

> you'd also have good results with a radiant barrier in an attic.

>

> For windows, you either need very fine mesh (like 200 wires per inch copper

> from TWPinc.com) or metallic film (or foil, but then you can't see out).

>

> On Sat, Apr 17, 2010 at 7:16 AM, K <kfarming@...<kfarming%40>>

> wrote:

>

> >

> >

> > Yes I am talking about the National Air guard Jets. I don't know if they

> > are F-14's or if they're something else. I do know there is more

> equipment

> > on these jets.

> >

> > I only have these symptoms at home when they fly.

> >

> > I have wondered about infrasound coming off the jets since I will start

> > having symptoms before I hear them in the area. However, with the

> commercial

> > airliner jets, I do associate the jabbing, stabbing chest pain every

> second

> > until that jet passes overhead, I would suppose that is from their radar

> > swoop?

> >

> > What kind of meter is going to measure that high? It's obvious my

> > Electrosmog meter isn't high enough.

> > Kris

> >

> > ________________________________

> > From: S son <sandreas41@... <sandreas41%40gmail.com><sandreas41%

> 40gmail.com>>

> > <%40> <%

> 40>

>

> > Sent: Sat, April 17, 2010 12:26:33 AM

> >

> > Subject: Re: RADAR HELP!

> >

> > K wrote:

> > > I was educated yesterday by the lessemf.com guys that radar is at 77

> > ghz.

> >

> > I'll just add, I really feel it when the military jets fly overhead. The

> > other day I had the Acoustimeter out and was mapping the area up the

> > hill. I could hear the jet coming on the meter first, then the sound

> > arrived. Went up to 0.05 V/m. A low number, but it was way up in the sky

> > and not right overhead. Didn't hurt that far away, not too much.

> >

> > Anyways, since the meter only goes up to 8GHz, I think it emitted more

> > than just " radar " .

> >

> > Are you talking about U.S. planes?

> >

> > From what you described, I would tend to think there is something more

> > in your area than just the jets, causing the heightened symptoms.

> >

> >

> >

> > ------------------------------------

> >

> >

Guest guest
Posted

Radar has a number of types, and a huge range of frequencies:

P-Band – 30 - 100 cm (1 - 0.3 GHz)

L-Band – 15 - 30 cm (2 - 1 GHz)

S-Band – 8 - 15 cm (4 - 2 GHz)

C-Band – 4 - 8 cm (8 - 4 GHz)

X-Band – 2.5 - 4 cm (12 - 8 GHz)

K-Band – Ku: 1.7 - 2.5 cm (18 - 12 GHz); Ka: 0.75 - 1.2 cm (40 - 27 GHz).

http://en.wikipedia.org/wiki/History_of_radar#United_States

Also Ka 33.4 - 36.0 GHz and IR -- Infrared 332 THz 904 nm Laser Radar

http://www.copradar.com/preview/chapt6/ch6d1.html

So it's going to depend on the part of the spectrum it's in, infrared,

microwave, etc., on what you are going to need to shield it with. Whatever is

the most multipurpose you can find is probably the best idea.

~ Snoshoe

> > I was educated yesterday by the lessemf.com guys that radar is at 77 ghz.

>

Guest guest
Posted

I just thought of something else...

But first maybe you can try something we talked on here a few years back to help

- the silver lame fabric from Walmart or fabric stores, a few yards of that to

add a couple more layers of protection. You can use it as a blanket in the cage,

and it reflects your body's own fir, which is nice too, unless it's really hot

out.

Someone here tested it for it's impedence ability and found it does has some.

Now by other thought, :( . It may be that being military jets, they have started

using the x-ray imaging in some of their onboard tech. like some satellites do.

The only answer I can to that is can you say " lead paint " . If you're sensitive

to xrays, it has a burning sensation, similar to too much sun exposure, but you

may feel it deeper.

Something to try for heart, if you can hold a jug of water in front of your

heart, it seems to help absorb some of problem and reduce the pain, don't know

about that frequency, but I've tried it a couple times in town now, when my

heart was being bothered. If I have a cup of coffee in my hand say, I'll hold it

in front of my heart till it passes and it seems to reduce the effect. If it's

coming from your back, well maybe make a wall lined with plastic water bottles

in your room?

~ Snoshoe

>

> Ok, So I am getting more and more sensitive to the military RADAR as well as

obtaining new symptoms even from commercial jets. this stabbing pain into my

chest and out through my mid back. The Heavy duty faraday canopy is not

shielding me good enough anymore.

>

> What do I do?

> Kris

>

>

>

>

>

>

Guest guest
Posted

Sorry I didn't respond til now. Wasn't able to get to my emails yesterday.

wouldn't let me in for some reason. ;( Jets have been flying late

afternoon and at night everyday this week so I have been really suffering

lately.

SIlver Lame Fabric:

one site said is was made of Polyester. Amazon's site showed it was made out of

49% Nylon, 51% Metallic Yarn and quite a bit more expensive. What materials

should I look for in this fabric? Is metallic yarn a metal yarn? Also, can you

explain my fogged brain a little more how this will give me more protection?

Military jets:

They are supposed to be getting new jets with digital equipment on them. Again,

will I be exposed to higher levels?

Water jugs.

I can try that. See if it works.

Radar and it's frequencies.

I do not have a meter that will measure this for me. I have an electrosmog

meter. Never does it read while they are flying. Does that mean the radar is

too high for it to read? I have never understood that meter and have had trouble

with it since I bought it last year. :(

________________________________

From: snoshoe_2 <snoshoe_2@...>

Sent: Wed, April 21, 2010 2:39:18 AM

Subject: Re: RADAR HELP!

I just thought of something else...

But first maybe you can try something we talked on here a few years back to help

- the silver lame fabric from Walmart or fabric stores, a few yards of that to

add a couple more layers of protection. You can use it as a blanket in the cage,

and it reflects your body's own fir, which is nice too, unless it's really hot

out.

Someone here tested it for it's impedence ability and found it does has some.

Now by other thought, :( . It may be that being military jets, they have started

using the x-ray imaging in some of their onboard tech. like some satellites do.

The only answer I can to that is can you say " lead paint " . If you're sensitive

to xrays, it has a burning sensation, similar to too much sun exposure, but you

may feel it deeper.

Something to try for heart, if you can hold a jug of water in front of your

heart, it seems to help absorb some of problem and reduce the pain, don't know

about that frequency, but I've tried it a couple times in town now, when my

heart was being bothered. If I have a cup of coffee in my hand say, I'll hold it

in front of my heart till it passes and it seems to reduce the effect. If it's

coming from your back, well maybe make a wall lined with plastic water bottles

in your room?

~ Snoshoe

>

> Ok, So I am getting more and more sensitive to the military RADAR as well as

obtaining new symptoms even from commercial jets. this stabbing pain into my

chest and out through my mid back. The Heavy duty faraday canopy is not

shielding me good enough anymore.

>

> What do I do?

> Kris

>

>

>

>

>

>

Guest guest
Posted

What kind of electrosmog meter ?

Brand?

Type?

LF or HF ?

Greetings,

Claessens

member Verband Baubiologie

www.milieuziektes.nl

www.milieuziektes.be

www.hetbitje.nl

checked by Norton

Re: Re: RADAR HELP!

>

> Radar and it's frequencies.

> I do not have a meter that will measure this for me. I have an

> electrosmog meter. Never does it read while they are flying. Does that

> mean the radar is too high for it to read? I have never understood that

> meter and have had trouble with it since I bought it last year. :(

>

>

Guest guest
Posted

Silver and copper are the best. But aluminum is best per $. But if it is

77GHz you need a really fine weave. 200 per inch might not be necessary,

but the wavelength is about (1/77) feet which is like 1/6 of an inch. You

definitely need to have spacing more dense that 12 per inch, and several

times that is better. So really nothing below 40 per inch.

Try to have overlap all around the windows... if it leaks in it will bounce

around. You will get reduction... whether it will be enough I can't

predict.

On Thu, Apr 22, 2010 at 10:18 AM, K <kfarming@...> wrote:

>

>

> Sorry I didn't respond til now. Wasn't able to get to my emails yesterday.

> wouldn't let me in for some reason. ;( Jets have been flying late

> afternoon and at night everyday this week so I have been really suffering

> lately.

>

> SIlver Lame Fabric:

> one site said is was made of Polyester. Amazon's site showed it was made

> out of 49% Nylon, 51% Metallic Yarn and quite a bit more expensive. What

> materials should I look for in this fabric? Is metallic yarn a metal yarn?

> Also, can you explain my fogged brain a little more how this will give me

> more protection?

>

> Military jets:

> They are supposed to be getting new jets with digital equipment on them.

> Again, will I be exposed to higher levels?

>

> Water jugs.

> I can try that. See if it works.

>

> Radar and it's frequencies.

> I do not have a meter that will measure this for me. I have an electrosmog

> meter. Never does it read while they are flying. Does that mean the radar is

> too high for it to read? I have never understood that meter and have had

> trouble with it since I bought it last year. :(

>

> ________________________________

> From: snoshoe_2 <snoshoe_2@... <snoshoe_2%40>>

> <%40>

> Sent: Wed, April 21, 2010 2:39:18 AM

> Subject: Re: RADAR HELP!

>

>

> I just thought of something else...

>

> But first maybe you can try something we talked on here a few years back to

> help - the silver lame fabric from Walmart or fabric stores, a few yards of

> that to add a couple more layers of protection. You can use it as a blanket

> in the cage, and it reflects your body's own fir, which is nice too, unless

> it's really hot out.

> Someone here tested it for it's impedence ability and found it does has

> some.

>

> Now by other thought, :( . It may be that being military jets, they have

> started using the x-ray imaging in some of their onboard tech. like some

> satellites do. The only answer I can to that is can you say " lead paint " . If

> you're sensitive to xrays, it has a burning sensation, similar to too much

> sun exposure, but you may feel it deeper.

>

> Something to try for heart, if you can hold a jug of water in front of your

> heart, it seems to help absorb some of problem and reduce the pain, don't

> know about that frequency, but I've tried it a couple times in town now,

> when my heart was being bothered. If I have a cup of coffee in my hand say,

> I'll hold it in front of my heart till it passes and it seems to reduce the

> effect. If it's coming from your back, well maybe make a wall lined with

> plastic water bottles in your room?

> ~ Snoshoe

>

>

> >

> > Ok, So I am getting more and more sensitive to the military RADAR as well

> as obtaining new symptoms even from commercial jets. this stabbing pain into

> my chest and out through my mid back. The Heavy duty faraday canopy is not

> shielding me good enough anymore.

> >

> > What do I do?

> > Kris

> >

> >

> >

> >

> >

> >

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...