Guest guest Posted April 15, 2010 Report Posted April 15, 2010 Ok Added info. I just found out that Radar is at 77ghz. no way will the faraday canopy protect me at that. Nor will the Argen mesh. SO WHAT WILL? kRIS ________________________________ From: K <kfarming@...> Sent: Wed, April 14, 2010 10:35:07 PM Subject: RADAR HELP! Ok, So I am getting more and more sensitive to the military RADAR as well as obtaining new symptoms even from commercial jets. this stabbing pain into my chest and out through my mid back. The Heavy duty faraday canopy is not shielding me good enough anymore. What do I do? Kris Quote
Guest guest Posted April 15, 2010 Report Posted April 15, 2010 > Ok Added info. I just found out that Radar is at 77ghz. no way will the > faraday canopy protect me at that. Nor will the Argen mesh. SO WHAT > WILL? Have you tried a Quantum Pro? Marc Quote
Guest guest Posted April 15, 2010 Report Posted April 15, 2010 no I haven't. What will that do? Kris ________________________________ From: Marc <marc@...> Sent: Thu, April 15, 2010 2:59:11 PM Subject: Re: RADAR HELP! > Ok Added info. I just found out that Radar is at 77ghz. no way will the > faraday canopy protect me at that. Nor will the Argen mesh. SO WHAT > WILL? Have you tried a Quantum Pro? Marc ------------------------------------ Quote
Guest guest Posted April 15, 2010 Report Posted April 15, 2010 > no I haven't. What will that do? Well, Diane/Evie and I both have noticed that it makes EMF coming into your house from the outside more tolerable. It is not " shielding " , but rather is doing " something " to the local environment that negates the negative reaction that people have to EMF. That " something " has to do with Quantum coherence. And if it doesn't help, it has a money back guarantee. :-) http://quantumproducts.com/catalog/quantum_pro.html Marc Quote
Guest guest Posted April 15, 2010 Report Posted April 15, 2010 Hi, Kris,  I don't know if the Quantum Pro will help with your problems, but it does seem to keep frequencies from the outside, out of my house, to a large degree. I still have had to shield windows or I can feel a difference there, tho. And everyday at 3pm, something gets worse at that house which I assume is coming from outside, and I can feel the change (now understand, I, like Marc, am much better es-wise and tho I can still " feel " changes, these do not make me ill as they did before). However, if I either sit next to the Q Pro or move it closer to me at 3pm, the up-tick in frequencies seems to go away. It is worth a try and, as Marc said, it has a reliable return policy.  I hope it helps you, Diane  From: Marc <marc@...> Subject: Re: RADAR HELP! Date: Thursday, April 15, 2010, 6:37 PM  > no I haven't. What will that do? Well, Diane/Evie and I both have noticed that it makes EMF coming into your house from the outside more tolerable. It is not " shielding " , but rather is doing " something " to the local environment that negates the negative reaction that people have to EMF. That " something " has to do with Quantum coherence. And if it doesn't help, it has a money back guarantee. :-) http://quantumprodu cts.com/catalog/ quantum_pro. html Marc Quote
Guest guest Posted April 15, 2010 Report Posted April 15, 2010 so are you saying when the jets are flying then I need to sit by the quantum pro? Should I still be under my canopy at the time? Kris ________________________________ From: Evie <evie15422@...> Sent: Thu, April 15, 2010 7:39:49 PM Subject: Re: RADAR HELP! Hi, Kris, I don't know if the Quantum Pro will help with your problems, but it does seem to keep frequencies from the outside, out of my house, to a large degree. I still have had to shield windows or I can feel a difference there, tho. And everyday at 3pm, something gets worse at that house which I assume is coming from outside, and I can feel the change (now understand, I, like Marc, am much better es-wise and tho I can still " feel " changes, these do not make me ill as they did before). However, if I either sit next to the Q Pro or move it closer to me at 3pm, the up-tick in frequencies seems to go away. It is worth a try and, as Marc said, it has a reliable return policy. I hope it helps you, Diane From: Marc <marc@...> Subject: Re: RADAR HELP! Date: Thursday, April 15, 2010, 6:37 PM > no I haven't. What will that do? Well, Diane/Evie and I both have noticed that it makes EMF coming into your house from the outside more tolerable. It is not " shielding " , but rather is doing " something " to the local environment that negates the negative reaction that people have to EMF. That " something " has to do with Quantum coherence. And if it doesn't help, it has a money back guarantee. :-) http://quantumprodu cts.com/catalog/ quantum_pro. html Marc Quote
Guest guest Posted April 15, 2010 Report Posted April 15, 2010 > so are you saying when the jets are flying then I need to sit by the > quantum pro? Should I still be under my canopy at the time? I don't think anyone can accurate predict how much protection you will need -- you just need to try it out and see! Marc Quote
Guest guest Posted April 15, 2010 Report Posted April 15, 2010 Hi Kris,  <so are you saying when the jets are flying then I need to sit by the quantum pro? Should I still be under my canopy at the time?>  I wasn't actually aware when I wrote this that you were talking about radar from a jet flying by. I thought you were talking about radar from an airport terminal. So I was suggesting that you could add protection by sitting (or standing) by the Q Pro, or moving it closer to where you were working, or into your bedroom when you are in bed under your canopy.  Actually, I personally doubt the Q Pro will help you with jet radar (tho it might still be worth the try) because my experience is there is a lag in protection-- when outside frequencies heighten, it takes sometimes a few minutes for the device to remediate them. Diane From: Marc <marcufoseries (DOT) com> Subject: Re: RADAR HELP! groups (DOT) com Date: Thursday, April 15, 2010, 6:37 PM > no I haven't. What will that do? Well, Diane/Evie and I both have noticed that it makes EMF coming into your house from the outside more tolerable. It is not " shielding " , but rather is doing " something " to the local environment that negates the negative reaction that people have to EMF. That " something " has to do with Quantum coherence. And if it doesn't help, it has a money back guarantee. :-) http://quantumprodu cts.com/catalog/ quantum_pro. html Marc Quote
Guest guest Posted April 16, 2010 Report Posted April 16, 2010 PUK replies - another way of looking at it would be to research how the military would try to deflect radar signals from the enemy, alas I think we are talking stealth tech here, but you should be able to protect yourself by reflection, with aluminium structure ? get an old car and convert it to be in your living room, now that would be cool. obviously no engine etc, esheilded windows etc... In a message dated 16/04/2010 01:40:01 GMT Daylight Time, evie15422@... writes: Hi, Kris, I don't know if the Quantum Pro will help with your problems, but it does seem to keep frequencies from the outside, out of my house, to a large degree. I still have had to shield windows or I can feel a difference there, tho. And everyday at 3pm, something gets worse at that house which I assume is coming from outside, and I can feel the change (now understand, I, like Marc, am much better es-wise and tho I can still " feel " changes, these do not make me ill as they did before). However, if I either sit next to the Q Pro or move it closer to me at 3pm, the up-tick in frequencies seems to go away. It is worth a try and, as Marc said, it has a reliable return policy. I hope it helps you, Diane From: Marc <_marc@..._ (mailto:marc@...) > Subject: Re: RADAR HELP! _@..._ (mailto: ) Date: Thursday, April 15, 2010, 6:37 PM > no I haven't. What will that do? Well, Diane/Evie and I both have noticed that it makes EMF coming into your house from the outside more tolerable. It is not " shielding " , but rather is doing " something " to the local environment that negates the negative reaction that people have to EMF. That " something " has to do with Quantum coherence. And if it doesn't help, it has a money back guarantee. :-) _http://quantumprodu_ (http://quantumprodu/) cts.com/catalog/ quantum_pro. html Marc [Non-text portions of this message have been removed] Quote
Guest guest Posted April 16, 2010 Report Posted April 16, 2010 > Actually, I personally doubt the Q Pro will help you with jet radar (tho > it might still be worth the try) because my experience is there is a lag > in protection-- when outside frequencies heighten, it takes sometimes a > few minutes for the device to remediate them. Yes, there is a lag with the Quantum Pro, which does make it work better (I think) for a constant source of EMF, however, I still think that if one is being exposed to a variety of forms of EMF (which everyone is), that if you can help with some forms of EMF, then your sensitivity to other sources is reduced. Marc Quote
Guest guest Posted April 16, 2010 Report Posted April 16, 2010 no see I live in a fly zone where the military air guard practice their maneuvers and runs. There will be one or two to five or six of them at a time. circling, diving, " swishing and Swooshing " (if you know what I mean.) They fly just under the sound barrier, sometimes they break it. They fly at 6000 ft. most commercial jets fly at 30,000 ft. I am getting sensitive enough that now the commercial jets are hurting me too. This is what I need protection from. The military will fly around 10:00 am til 11:30 then again at 2:00-5:00 Tues thru Fri. Then they will have guard weekends where they will fly Sat and Sun and also their nighttime practice runs that can be whenever. I live 20 minutes from the border of the fly zone. I've tried driving out of the zone to see if that helps but b/c I am now being sensitive to the commercial jets that doesn't work b/c the commercial jets then are rerouted around the active fly zone, plus the exposures to more high power lines, cell phones and their towers, etc...... Kris ________________________________ From: Evie <evie15422@...> Sent: Fri, April 16, 2010 12:24:05 AM Subject: Re: RADAR HELP! Hi Kris, <so are you saying when the jets are flying then I need to sit by the quantum pro? Should I still be under my canopy at the time?> I wasn't actually aware when I wrote this that you were talking about radar from a jet flying by. I thought you were talking about radar from an airport terminal. So I was suggesting that you could add protection by sitting (or standing) by the Q Pro, or moving it closer to where you were working, or into your bedroom when you are in bed under your canopy. Actually, I personally doubt the Q Pro will help you with jet radar (tho it might still be worth the try) because my experience is there is a lag in protection-- when outside frequencies heighten, it takes sometimes a few minutes for the device to remediate them. Diane From: Marc <marcufoseries (DOT) com> Subject: Re: RADAR HELP! groups (DOT) com Date: Thursday, April 15, 2010, 6:37 PM > no I haven't. What will that do? Well, Diane/Evie and I both have noticed that it makes EMF coming into your house from the outside more tolerable. It is not " shielding " , but rather is doing " something " to the local environment that negates the negative reaction that people have to EMF. That " something " has to do with Quantum coherence. And if it doesn't help, it has a money back guarantee. :-) http://quantumprodu cts.com/catalog/ quantum_pro. html Marc Quote
Guest guest Posted April 16, 2010 Report Posted April 16, 2010 Yes, that is the biggest EMF issue I have where I am living. We're taking care of the stray voltage issues in this 1902 house. We live in the country and the cell phone tower is 4 miles south of us with our town in between. Any high powered lines are also 3-4 miles east of us. We live in kind of a draw of sorts with mainly hayland and pasture surrounding us. I feel the symptoms before I hear them flying overhead. Then usually I would get under my heavy duty faraday canopy as quick as I could. Last fall that would be all I needed to do. Now, it's not working. I am chemically sensitive so I shy away from paint. We are in the process of building a travel trailer in order to be a safe and protective living space. However the mesh we were going to use will not shield me from this. We have the exterior done. It's steel however We know there are shielding leaks b/c of the way the strips of steel went on. We were depending on the interior shielding to do the trick. Exactly, I need a material that will absorb or shield me from it. I was educated yesterday by the lessemf.com guys that radar is at 77 ghz. They don't have any material that's been tested for this level of EMF. Yes they fly twice a day 5-6 days a week, not always in my area but very often. I live close(15 miles) from a major river that they like to use for practice. Kris ________________________________ From: " paulpjc@... " <paulpjc@...> Sent: Fri, April 16, 2010 5:14:46 AM Subject: Re: RADAR HELP! PUK replies - Is the radar from the jets the prime EMR agitant in your vicinity ? I guess that a regular dose of the same emr is bad as your ES will all too quickly recognise this, is there no way you can set up an early warning system and then seek cover ? You need to ascertain what materiel will absorb the radar - you probably need a microwave painted shelter that you can stand in, but of course the whole thing will be impractical as I suppose the jets fly over frequently ? In a message dated 16/04/2010 06:26:12 GMT Daylight Time, evie15422@... writes: so are you saying when the jets are flying then I need to sit by the quantum pro? Should I still be under my canopy at the time? Kris Quote
Guest guest Posted April 16, 2010 Report Posted April 16, 2010 so then align my walls with solid aluminum? How thick? where could I get such stuff like the aluminum and eshielded windows? I still get the same symptoms but worse while in my van than under the canopy. Kris ________________________________ From: " paulpjc@... " <paulpjc@...> Sent: Fri, April 16, 2010 5:19:51 AM Subject: Re: RADAR HELP! PUK replies - another way of looking at it would be to research how the military would try to deflect radar signals from the enemy, alas I think we are talking stealth tech here, but you should be able to protect yourself by reflection, with aluminium structure ? get an old car and convert it to be in your living room, now that would be cool. obviously no engine etc, esheilded windows etc... In a message dated 16/04/2010 01:40:01 GMT Daylight Time, evie15422@... writes: Hi, Kris, I don't know if the Quantum Pro will help with your problems, but it does seem to keep frequencies from the outside, out of my house, to a large degree. I still have had to shield windows or I can feel a difference there, tho. And everyday at 3pm, something gets worse at that house which I assume is coming from outside, and I can feel the change (now understand, I, like Marc, am much better es-wise and tho I can still " feel " changes, these do not make me ill as they did before). However, if I either sit next to the Q Pro or move it closer to me at 3pm, the up-tick in frequencies seems to go away. It is worth a try and, as Marc said, it has a reliable return policy. I hope it helps you, Diane From: Marc <_marc@..._ (mailto:marc@...) > Subject: Re: RADAR HELP! _@..._ (mailto: ) Date: Thursday, April 15, 2010, 6:37 PM > no I haven't. What will that do? Well, Diane/Evie and I both have noticed that it makes EMF coming into your house from the outside more tolerable. It is not " shielding " , but rather is doing " something " to the local environment that negates the negative reaction that people have to EMF. That " something " has to do with Quantum coherence. And if it doesn't help, it has a money back guarantee. :-) _http://quantumprodu_ (http://quantumprodu/) cts.com/catalog/ quantum_pro. html Marc [Non-text portions of this message have been removed] Quote
Guest guest Posted April 16, 2010 Report Posted April 16, 2010 K wrote: > I was educated yesterday by the lessemf.com guys that radar is at 77 ghz. I'll just add, I really feel it when the military jets fly overhead. The other day I had the Acoustimeter out and was mapping the area up the hill. I could hear the jet coming on the meter first, then the sound arrived. Went up to 0.05 V/m. A low number, but it was way up in the sky and not right overhead. Didn't hurt that far away, not too much. Anyways, since the meter only goes up to 8GHz, I think it emitted more than just " radar " . Are you talking about U.S. planes? From what you described, I would tend to think there is something more in your area than just the jets, causing the heightened symptoms. Quote
Guest guest Posted April 17, 2010 Report Posted April 17, 2010 Yes I am talking about the National Air guard Jets. I don't know if they are F-14's or if they're something else. I do know there is more equipment on these jets. I only have these symptoms at home when they fly. I have wondered about infrasound coming off the jets since I will start having symptoms before I hear them in the area. However, with the commercial airliner jets, I do associate the jabbing, stabbing chest pain every second until that jet passes overhead, I would suppose that is from their radar swoop? What kind of meter is going to measure that high? It's obvious my Electrosmog meter isn't high enough. Kris ________________________________ From: S son <sandreas41@...> Sent: Sat, April 17, 2010 12:26:33 AM Subject: Re: RADAR HELP! K wrote: > I was educated yesterday by the lessemf.com guys that radar is at 77 ghz. I'll just add, I really feel it when the military jets fly overhead. The other day I had the Acoustimeter out and was mapping the area up the hill. I could hear the jet coming on the meter first, then the sound arrived. Went up to 0.05 V/m. A low number, but it was way up in the sky and not right overhead. Didn't hurt that far away, not too much. Anyways, since the meter only goes up to 8GHz, I think it emitted more than just " radar " . Are you talking about U.S. planes? From what you described, I would tend to think there is something more in your area than just the jets, causing the heightened symptoms. ------------------------------------ Quote
Guest guest Posted April 17, 2010 Report Posted April 17, 2010 Regular aluminum foil will block 77GHz. Heavy duty might be better, and is easier to work with. Or a stronger product like astro-foil. At that frequency it is very much line-of-sight, although there will be some scattering from small metal objects like nails. I don't know if Y-shield would help (I think it would, but they have no specs) but I would bet the copper or aluminum paints would. If you have a flat roof, you can get an aluminum coating painted on. I think you'd also have good results with a radiant barrier in an attic. For windows, you either need very fine mesh (like 200 wires per inch copper from TWPinc.com) or metallic film (or foil, but then you can't see out). On Sat, Apr 17, 2010 at 7:16 AM, K <kfarming@...> wrote: > > > Yes I am talking about the National Air guard Jets. I don't know if they > are F-14's or if they're something else. I do know there is more equipment > on these jets. > > I only have these symptoms at home when they fly. > > I have wondered about infrasound coming off the jets since I will start > having symptoms before I hear them in the area. However, with the commercial > airliner jets, I do associate the jabbing, stabbing chest pain every second > until that jet passes overhead, I would suppose that is from their radar > swoop? > > What kind of meter is going to measure that high? It's obvious my > Electrosmog meter isn't high enough. > Kris > > ________________________________ > From: S son <sandreas41@... <sandreas41%40gmail.com>> > <%40> > Sent: Sat, April 17, 2010 12:26:33 AM > > Subject: Re: RADAR HELP! > > K wrote: > > I was educated yesterday by the lessemf.com guys that radar is at 77 > ghz. > > I'll just add, I really feel it when the military jets fly overhead. The > other day I had the Acoustimeter out and was mapping the area up the > hill. I could hear the jet coming on the meter first, then the sound > arrived. Went up to 0.05 V/m. A low number, but it was way up in the sky > and not right overhead. Didn't hurt that far away, not too much. > > Anyways, since the meter only goes up to 8GHz, I think it emitted more > than just " radar " . > > Are you talking about U.S. planes? > > From what you described, I would tend to think there is something more > in your area than just the jets, causing the heightened symptoms. > > > > ------------------------------------ > > Quote
Guest guest Posted April 17, 2010 Report Posted April 17, 2010 Well, we had tried the Denny Foil. I chemically reacted to it. This is a two-story house so painting the attic is impossible since my bedroom is not under the attic. Plus, I am chemically sensitive and they Y-shield paint has not been recommended for me with my sensitivities. With that said, would that copper mesh be a success if I lined the walls, floor, and ceiling of the trailer besides the windows? Or would solid aluminum instead of wallboard work and where would I get a product and how can I attach it/ seal it in the trailer without caulking? In other words, I have to seal what is in the walls( the insulation) but I am sensitive to caulk even the " Safe " stuff. We have steel studs about 2 feet apart and the rafters are 4 feet apart with solid pieces attaching each one. Kris ________________________________ From: Bill Bruno <wbruno@...> Sent: Sat, April 17, 2010 11:34:41 AM Subject: Re: RADAR HELP! Regular aluminum foil will block 77GHz. Heavy duty might be better, and is easier to work with. Or a stronger product like astro-foil. At that frequency it is very much line-of-sight, although there will be some scattering from small metal objects like nails. I don't know if Y-shield would help (I think it would, but they have no specs) but I would bet the copper or aluminum paints would. If you have a flat roof, you can get an aluminum coating painted on. I think you'd also have good results with a radiant barrier in an attic. For windows, you either need very fine mesh (like 200 wires per inch copper from TWPinc.com) or metallic film (or foil, but then you can't see out). On Sat, Apr 17, 2010 at 7:16 AM, K <kfarming@...> wrote: > > > Yes I am talking about the National Air guard Jets. I don't know if they > are F-14's or if they're something else. I do know there is more equipment > on these jets. > > I only have these symptoms at home when they fly. > > I have wondered about infrasound coming off the jets since I will start > having symptoms before I hear them in the area. However, with the commercial > airliner jets, I do associate the jabbing, stabbing chest pain every second > until that jet passes overhead, I would suppose that is from their radar > swoop? > > What kind of meter is going to measure that high? It's obvious my > Electrosmog meter isn't high enough. > Kris > > ________________________________ > From: S son <sandreas41@... <sandreas41%40gmail.com>> > <%40> > Sent: Sat, April 17, 2010 12:26:33 AM > > Subject: Re: RADAR HELP! > > K wrote: > > I was educated yesterday by the lessemf.com guys that radar is at 77 > ghz. > > I'll just add, I really feel it when the military jets fly overhead. The > other day I had the Acoustimeter out and was mapping the area up the > hill. I could hear the jet coming on the meter first, then the sound > arrived. Went up to 0.05 V/m. A low number, but it was way up in the sky > and not right overhead. Didn't hurt that far away, not too much. > > Anyways, since the meter only goes up to 8GHz, I think it emitted more > than just " radar " . > > Are you talking about U.S. planes? > > From what you described, I would tend to think there is something more > in your area than just the jets, causing the heightened symptoms. > > > > ------------------------------------ > > Quote
Guest guest Posted April 17, 2010 Report Posted April 17, 2010 It is possible if you're that sensitive you'll react to aluminum and/or copper. You've tried 100% silicone caulk? I think Y-shield is pretty tolerable as paints go. You might discuss with the company as they used to have a powder form you mix with water. It does smell bad for a day or two, but not nearly as bad as most paints. Bill On Sat, Apr 17, 2010 at 4:54 PM, K <kfarming@...> wrote: > > > Well, we had tried the Denny Foil. I chemically reacted to it. This is a > two-story house so painting the attic is impossible since my bedroom is not > under the attic. Plus, I am chemically sensitive and they Y-shield paint has > not been recommended for me with my sensitivities. With that said, would > that copper mesh be a success if I lined the walls, floor, and ceiling of > the trailer besides the windows? > > Or would solid aluminum instead of wallboard work and where would I get a > product and how can I attach it/ seal it in the trailer without caulking? In > other words, I have to seal what is in the walls( the insulation) but I am > sensitive to caulk even the " Safe " stuff. We have steel studs about 2 feet > apart and the rafters are 4 feet apart with solid pieces attaching each one. > Kris > > ________________________________ > From: Bill Bruno <wbruno@... <wbruno%40gmail.com>> > <%40> > Sent: Sat, April 17, 2010 11:34:41 AM > > Subject: Re: RADAR HELP! > > Regular aluminum foil will block 77GHz. Heavy duty might be better, and is > easier to work with. Or a stronger product like astro-foil. At that > frequency it is very much line-of-sight, although there will be some > scattering from small metal objects like nails. I don't know if Y-shield > would help (I think it would, but they have no specs) but I would bet the > copper or aluminum paints would. If you have > a flat roof, you can get an aluminum coating painted on. I think > you'd also have good results with a radiant barrier in an attic. > > For windows, you either need very fine mesh (like 200 wires per inch copper > from TWPinc.com) or metallic film (or foil, but then you can't see out). > > On Sat, Apr 17, 2010 at 7:16 AM, K <kfarming@...<kfarming%40>> > wrote: > > > > > > > Yes I am talking about the National Air guard Jets. I don't know if they > > are F-14's or if they're something else. I do know there is more > equipment > > on these jets. > > > > I only have these symptoms at home when they fly. > > > > I have wondered about infrasound coming off the jets since I will start > > having symptoms before I hear them in the area. However, with the > commercial > > airliner jets, I do associate the jabbing, stabbing chest pain every > second > > until that jet passes overhead, I would suppose that is from their radar > > swoop? > > > > What kind of meter is going to measure that high? It's obvious my > > Electrosmog meter isn't high enough. > > Kris > > > > ________________________________ > > From: S son <sandreas41@... <sandreas41%40gmail.com><sandreas41% > 40gmail.com>> > > <%40> <% > 40> > > > Sent: Sat, April 17, 2010 12:26:33 AM > > > > Subject: Re: RADAR HELP! > > > > K wrote: > > > I was educated yesterday by the lessemf.com guys that radar is at 77 > > ghz. > > > > I'll just add, I really feel it when the military jets fly overhead. The > > other day I had the Acoustimeter out and was mapping the area up the > > hill. I could hear the jet coming on the meter first, then the sound > > arrived. Went up to 0.05 V/m. A low number, but it was way up in the sky > > and not right overhead. Didn't hurt that far away, not too much. > > > > Anyways, since the meter only goes up to 8GHz, I think it emitted more > > than just " radar " . > > > > Are you talking about U.S. planes? > > > > From what you described, I would tend to think there is something more > > in your area than just the jets, causing the heightened symptoms. > > > > > > > > ------------------------------------ > > > > Quote
Guest guest Posted April 17, 2010 Report Posted April 17, 2010 been looking at this astro-foil. It's like reflectix right? sorry if I sound dumb. Bad brain fog today. If we ligned the whole trailer with this reflectix and like you said before use the 200 woven copper mesh for the windows, I would be quite protected then from the Radar? Will this also protect me from the lower frequencies too? THanks so much, Kris ________________________________ From: Bill Bruno <wbruno@...> Sent: Sat, April 17, 2010 11:34:41 AM Subject: Re: RADAR HELP! Regular aluminum foil will block 77GHz. Heavy duty might be better, and is easier to work with. Or a stronger product like astro-foil. At that frequency it is very much line-of-sight, although there will be some scattering from small metal objects like nails. I don't know if Y-shield would help (I think it would, but they have no specs) but I would bet the copper or aluminum paints would. If you have a flat roof, you can get an aluminum coating painted on. I think you'd also have good results with a radiant barrier in an attic. For windows, you either need very fine mesh (like 200 wires per inch copper from TWPinc.com) or metallic film (or foil, but then you can't see out). On Sat, Apr 17, 2010 at 7:16 AM, K <kfarming@...> wrote: > > > Yes I am talking about the National Air guard Jets. I don't know if they > are F-14's or if they're something else. I do know there is more equipment > on these jets. > > I only have these symptoms at home when they fly. > > I have wondered about infrasound coming off the jets since I will start > having symptoms before I hear them in the area. However, with the commercial > airliner jets, I do associate the jabbing, stabbing chest pain every second > until that jet passes overhead, I would suppose that is from their radar > swoop? > > What kind of meter is going to measure that high? It's obvious my > Electrosmog meter isn't high enough. > Kris > > ________________________________ > From: S son <sandreas41@... <sandreas41%40gmail.com>> > <%40> > Sent: Sat, April 17, 2010 12:26:33 AM > > Subject: Re: RADAR HELP! > > K wrote: > > I was educated yesterday by the lessemf.com guys that radar is at 77 > ghz. > > I'll just add, I really feel it when the military jets fly overhead. The > other day I had the Acoustimeter out and was mapping the area up the > hill. I could hear the jet coming on the meter first, then the sound > arrived. Went up to 0.05 V/m. A low number, but it was way up in the sky > and not right overhead. Didn't hurt that far away, not too much. > > Anyways, since the meter only goes up to 8GHz, I think it emitted more > than just " radar " . > > Are you talking about U.S. planes? > > From what you described, I would tend to think there is something more > in your area than just the jets, causing the heightened symptoms. > > > > ------------------------------------ > > Quote
Guest guest Posted April 17, 2010 Report Posted April 17, 2010 We've been using Novalink caulk from Chemlink. Even though they claim it's odor free, I can detect an odor that bothers me until it's painted over. I'll talk to my hubby about the y-shield paint. Still quite skiddish about it even in powder form. I've been sensitive to the no voc paints too. Kris ________________________________ From: Bill Bruno <wbruno@...> Sent: Sat, April 17, 2010 6:14:42 PM Subject: Re: RADAR HELP! It is possible if you're that sensitive you'll react to aluminum and/or copper. You've tried 100% silicone caulk? I think Y-shield is pretty tolerable as paints go. You might discuss with the company as they used to have a powder form you mix with water. It does smell bad for a day or two, but not nearly as bad as most paints. Bill On Sat, Apr 17, 2010 at 4:54 PM, K <kfarming@...> wrote: > > > Well, we had tried the Denny Foil. I chemically reacted to it. This is a > two-story house so painting the attic is impossible since my bedroom is not > under the attic. Plus, I am chemically sensitive and they Y-shield paint has > not been recommended for me with my sensitivities. With that said, would > that copper mesh be a success if I lined the walls, floor, and ceiling of > the trailer besides the windows? > > Or would solid aluminum instead of wallboard work and where would I get a > product and how can I attach it/ seal it in the trailer without caulking? In > other words, I have to seal what is in the walls( the insulation) but I am > sensitive to caulk even the " Safe " stuff. We have steel studs about 2 feet > apart and the rafters are 4 feet apart with solid pieces attaching each one. > Kris > > ________________________________ > From: Bill Bruno <wbruno@... <wbruno%40gmail.com>> > <%40> > Sent: Sat, April 17, 2010 11:34:41 AM > > Subject: Re: RADAR HELP! > > Regular aluminum foil will block 77GHz. Heavy duty might be better, and is > easier to work with. Or a stronger product like astro-foil. At that > frequency it is very much line-of-sight, although there will be some > scattering from small metal objects like nails. I don't know if Y-shield > would help (I think it would, but they have no specs) but I would bet the > copper or aluminum paints would. If you have > a flat roof, you can get an aluminum coating painted on. I think > you'd also have good results with a radiant barrier in an attic. > > For windows, you either need very fine mesh (like 200 wires per inch copper > from TWPinc.com) or metallic film (or foil, but then you can't see out). > > On Sat, Apr 17, 2010 at 7:16 AM, K <kfarming@...<kfarming%40>> > wrote: > > > > > > > Yes I am talking about the National Air guard Jets. I don't know if they > > are F-14's or if they're something else. I do know there is more > equipment > > on these jets. > > > > I only have these symptoms at home when they fly. > > > > I have wondered about infrasound coming off the jets since I will start > > having symptoms before I hear them in the area. However, with the > commercial > > airliner jets, I do associate the jabbing, stabbing chest pain every > second > > until that jet passes overhead, I would suppose that is from their radar > > swoop? > > > > What kind of meter is going to measure that high? It's obvious my > > Electrosmog meter isn't high enough. > > Kris > > > > ________________________________ > > From: S son <sandreas41@... <sandreas41%40gmail.com><sandreas41% > 40gmail.com>> > > <%40> <% > 40> > > > Sent: Sat, April 17, 2010 12:26:33 AM > > > > Subject: Re: RADAR HELP! > > > > K wrote: > > > I was educated yesterday by the lessemf.com guys that radar is at 77 > > ghz. > > > > I'll just add, I really feel it when the military jets fly overhead. The > > other day I had the Acoustimeter out and was mapping the area up the > > hill. I could hear the jet coming on the meter first, then the sound > > arrived. Went up to 0.05 V/m. A low number, but it was way up in the sky > > and not right overhead. Didn't hurt that far away, not too much. > > > > Anyways, since the meter only goes up to 8GHz, I think it emitted more > > than just " radar " . > > > > Are you talking about U.S. planes? > > > > From what you described, I would tend to think there is something more > > in your area than just the jets, causing the heightened symptoms. > > > > > > > > ------------------------------------ > > > > Quote
Guest guest Posted April 21, 2010 Report Posted April 21, 2010 Radar has a number of types, and a huge range of frequencies: P-Band – 30 - 100 cm (1 - 0.3 GHz) L-Band – 15 - 30 cm (2 - 1 GHz) S-Band – 8 - 15 cm (4 - 2 GHz) C-Band – 4 - 8 cm (8 - 4 GHz) X-Band – 2.5 - 4 cm (12 - 8 GHz) K-Band – Ku: 1.7 - 2.5 cm (18 - 12 GHz); Ka: 0.75 - 1.2 cm (40 - 27 GHz). http://en.wikipedia.org/wiki/History_of_radar#United_States Also Ka 33.4 - 36.0 GHz and IR -- Infrared 332 THz 904 nm Laser Radar http://www.copradar.com/preview/chapt6/ch6d1.html So it's going to depend on the part of the spectrum it's in, infrared, microwave, etc., on what you are going to need to shield it with. Whatever is the most multipurpose you can find is probably the best idea. ~ Snoshoe > > I was educated yesterday by the lessemf.com guys that radar is at 77 ghz. > Quote
Guest guest Posted April 21, 2010 Report Posted April 21, 2010 I just thought of something else... But first maybe you can try something we talked on here a few years back to help - the silver lame fabric from Walmart or fabric stores, a few yards of that to add a couple more layers of protection. You can use it as a blanket in the cage, and it reflects your body's own fir, which is nice too, unless it's really hot out. Someone here tested it for it's impedence ability and found it does has some. Now by other thought, . It may be that being military jets, they have started using the x-ray imaging in some of their onboard tech. like some satellites do. The only answer I can to that is can you say " lead paint " . If you're sensitive to xrays, it has a burning sensation, similar to too much sun exposure, but you may feel it deeper. Something to try for heart, if you can hold a jug of water in front of your heart, it seems to help absorb some of problem and reduce the pain, don't know about that frequency, but I've tried it a couple times in town now, when my heart was being bothered. If I have a cup of coffee in my hand say, I'll hold it in front of my heart till it passes and it seems to reduce the effect. If it's coming from your back, well maybe make a wall lined with plastic water bottles in your room? ~ Snoshoe > > Ok, So I am getting more and more sensitive to the military RADAR as well as obtaining new symptoms even from commercial jets. this stabbing pain into my chest and out through my mid back. The Heavy duty faraday canopy is not shielding me good enough anymore. > > What do I do? > Kris > > > > > > Quote
Guest guest Posted April 22, 2010 Report Posted April 22, 2010 Sorry I didn't respond til now. Wasn't able to get to my emails yesterday. wouldn't let me in for some reason. ;( Jets have been flying late afternoon and at night everyday this week so I have been really suffering lately. SIlver Lame Fabric: one site said is was made of Polyester. Amazon's site showed it was made out of 49% Nylon, 51% Metallic Yarn and quite a bit more expensive. What materials should I look for in this fabric? Is metallic yarn a metal yarn? Also, can you explain my fogged brain a little more how this will give me more protection? Military jets: They are supposed to be getting new jets with digital equipment on them. Again, will I be exposed to higher levels? Water jugs. I can try that. See if it works. Radar and it's frequencies. I do not have a meter that will measure this for me. I have an electrosmog meter. Never does it read while they are flying. Does that mean the radar is too high for it to read? I have never understood that meter and have had trouble with it since I bought it last year. ________________________________ From: snoshoe_2 <snoshoe_2@...> Sent: Wed, April 21, 2010 2:39:18 AM Subject: Re: RADAR HELP! I just thought of something else... But first maybe you can try something we talked on here a few years back to help - the silver lame fabric from Walmart or fabric stores, a few yards of that to add a couple more layers of protection. You can use it as a blanket in the cage, and it reflects your body's own fir, which is nice too, unless it's really hot out. Someone here tested it for it's impedence ability and found it does has some. Now by other thought, . It may be that being military jets, they have started using the x-ray imaging in some of their onboard tech. like some satellites do. The only answer I can to that is can you say " lead paint " . If you're sensitive to xrays, it has a burning sensation, similar to too much sun exposure, but you may feel it deeper. Something to try for heart, if you can hold a jug of water in front of your heart, it seems to help absorb some of problem and reduce the pain, don't know about that frequency, but I've tried it a couple times in town now, when my heart was being bothered. If I have a cup of coffee in my hand say, I'll hold it in front of my heart till it passes and it seems to reduce the effect. If it's coming from your back, well maybe make a wall lined with plastic water bottles in your room? ~ Snoshoe > > Ok, So I am getting more and more sensitive to the military RADAR as well as obtaining new symptoms even from commercial jets. this stabbing pain into my chest and out through my mid back. The Heavy duty faraday canopy is not shielding me good enough anymore. > > What do I do? > Kris > > > > > > Quote
Guest guest Posted April 22, 2010 Report Posted April 22, 2010 What kind of electrosmog meter ? Brand? Type? LF or HF ? Greetings, Claessens member Verband Baubiologie www.milieuziektes.nl www.milieuziektes.be www.hetbitje.nl checked by Norton Re: Re: RADAR HELP! > > Radar and it's frequencies. > I do not have a meter that will measure this for me. I have an > electrosmog meter. Never does it read while they are flying. Does that > mean the radar is too high for it to read? I have never understood that > meter and have had trouble with it since I bought it last year. > > Quote
Guest guest Posted April 22, 2010 Report Posted April 22, 2010 Silver and copper are the best. But aluminum is best per $. But if it is 77GHz you need a really fine weave. 200 per inch might not be necessary, but the wavelength is about (1/77) feet which is like 1/6 of an inch. You definitely need to have spacing more dense that 12 per inch, and several times that is better. So really nothing below 40 per inch. Try to have overlap all around the windows... if it leaks in it will bounce around. You will get reduction... whether it will be enough I can't predict. On Thu, Apr 22, 2010 at 10:18 AM, K <kfarming@...> wrote: > > > Sorry I didn't respond til now. Wasn't able to get to my emails yesterday. > wouldn't let me in for some reason. ;( Jets have been flying late > afternoon and at night everyday this week so I have been really suffering > lately. > > SIlver Lame Fabric: > one site said is was made of Polyester. Amazon's site showed it was made > out of 49% Nylon, 51% Metallic Yarn and quite a bit more expensive. What > materials should I look for in this fabric? Is metallic yarn a metal yarn? > Also, can you explain my fogged brain a little more how this will give me > more protection? > > Military jets: > They are supposed to be getting new jets with digital equipment on them. > Again, will I be exposed to higher levels? > > Water jugs. > I can try that. See if it works. > > Radar and it's frequencies. > I do not have a meter that will measure this for me. I have an electrosmog > meter. Never does it read while they are flying. Does that mean the radar is > too high for it to read? I have never understood that meter and have had > trouble with it since I bought it last year. > > ________________________________ > From: snoshoe_2 <snoshoe_2@... <snoshoe_2%40>> > <%40> > Sent: Wed, April 21, 2010 2:39:18 AM > Subject: Re: RADAR HELP! > > > I just thought of something else... > > But first maybe you can try something we talked on here a few years back to > help - the silver lame fabric from Walmart or fabric stores, a few yards of > that to add a couple more layers of protection. You can use it as a blanket > in the cage, and it reflects your body's own fir, which is nice too, unless > it's really hot out. > Someone here tested it for it's impedence ability and found it does has > some. > > Now by other thought, . It may be that being military jets, they have > started using the x-ray imaging in some of their onboard tech. like some > satellites do. The only answer I can to that is can you say " lead paint " . If > you're sensitive to xrays, it has a burning sensation, similar to too much > sun exposure, but you may feel it deeper. > > Something to try for heart, if you can hold a jug of water in front of your > heart, it seems to help absorb some of problem and reduce the pain, don't > know about that frequency, but I've tried it a couple times in town now, > when my heart was being bothered. If I have a cup of coffee in my hand say, > I'll hold it in front of my heart till it passes and it seems to reduce the > effect. If it's coming from your back, well maybe make a wall lined with > plastic water bottles in your room? > ~ Snoshoe > > > > > > Ok, So I am getting more and more sensitive to the military RADAR as well > as obtaining new symptoms even from commercial jets. this stabbing pain into > my chest and out through my mid back. The Heavy duty faraday canopy is not > shielding me good enough anymore. > > > > What do I do? > > Kris > > > > > > > > > > > > Quote
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.