Guest guest Posted May 14, 2010 Report Posted May 14, 2010 , Thank you for all the info! My doctor sometimes 'pretends' to know what I'm talking about when I bring an article, but then I'm sure he does his research and make his own conclusions. Which is a good thing in the end. And now that I know, no matter what he says I leave the papers with him and if he likes the idea, next time I see him he "comes up" with it. I find that somehow funny. Hopefully you get some good news in June! Do you have pictures of the brace anywhere? Would you mind sharing them with me? You can email me privately if you like. Maybe they can do some kind of "hybrid" brace. Thank you again! From: D <dew.writes@...>infantile scoliosis treatment Sent: Wed, May 12, 2010 10:46:07 PMSubject: Re: Brace for high curve? Well, I am happy to help any way I can! Our boys with their high curves--I think you and I both are known by our docs as being "the lady that brings the papers"!! Nobody has all the answers yet, so we do what we have to do. ) It's hard to find info about the r-c brace online. I tried and tried prior to getting to VA for our brace-making appointments. It's a complicated thing--one thing I'd be certain to ask your orthotist is whether his TLSO will address the THREE dimensions of scoliosis, including rotation. (Incidentally, the r-c brace we got was billed as custom tlso.) For your reference, Todd's brace has one shoulder strap, which is made of velcro, to push down gently on his higher shoulder. The brace goes up really high under his lower shoulder. In his brace, his shoulders look really even and balanced. There are some "sling straps" inside the brace, which apply the pressure against his curves. These are padded and wrap around to the outside of the plastic, attaching with velcro on the outside. That makes them adjustable, which I think is way better than the Providence braces we had, which are not at all adjustable. Those things are a one-shot deal, with not much room to grow, especially when the problem curve is at the very top of the brace. Hang in there, and maybe this info will help you get some good questions formulated. I wish I'd had time to prepare and ask questions before Todd's first brace was attempted. That was a surprise--we went with the expectation that cast #8 would stay on him longer than his time in the OR! When the doc came out and told us what was going on, we were stunned. (The last 3 casts had given no lasting correction.) We were totally clueless about braces. You are doing GREAT with getting prepared!! Take care, On Wed, May 12, 2010 at 10:26 PM, Portas wrote: > > > Hi ! > > I have been looking for info about that brace since I first read about it > (probably from you). I even checked your blog. I printed everything I could > find about the RC brace and took it to my ortho. He said he had heard about > it but didn't have enough information about how effective it was and he > likes to go with things he knows work. (?). > > I'm in Canada, so it might be more difficult to get that kind of brace over > here. But I'll bring the info again to him and the orthotics specialist and > see what they say. The Dr. already calls me "the lady that brings the > papers" anyway... lol... > > Thank you very much... I might contact you later for some contact info to > bring with me too. > > > > > > > *From:* D > > *To:* infantile scoliosis treatment @groups. com > *Sent:* Wed, May 12, 2010 7:49:36 PM > > *Subject:* Re: [infantile_scoliosi s] Brace for high curve? > > > > Hi , I heartily encourage you to ask LOTS of questions! And to get > in touch with an orthotist who could tell you some info about the > Rigo-Cheneau brace. I don't know where you live, but there are two I know of > in the US. One is in California and one is in Fairfax, Virginia. If you want > contact info, please email me off-list at dew.writesgmail (DOT) com and I will > be happy to help. My son,. Todd, has a very high curve, too, at T5-T6. > Casting got him from 50 degrees to mid-20s (lying down). He was casted 8 > times; the last cast was made to give to the orthotist who works with our > casting doc. They made a TLSO from the cast, but it was a total disaster. > They had to trash it and start all over with casting him (not under > anesthesia) for a Providence brace (he was then too small for the Providence > frame). His curve is just at the outside of what the Providence brace can > address, but they didn't know anything else to try at the time. In the year > that he was in the Prov., his curves (he's an S) progressed about 10 degrees > each. We learned of the Rigo-Cheneau brace on our own, asked our doc, who > called the orthotist in VA to learn about it. He enthusiastically encouraged > us to give it a try. High curves are difficult to address--everyone will > tell you that. But we have to keep on trying all we can! The orthotist who > made Todd's R-C brace is absolutely wonderful. We adore working with him. We > go back for the first adjustments in June. We are on the right track with > this brace, but only time will tell whether it will give any correction. > Given our prior brace experience, I am only hoping for it to hold him > steady...anything more would be beyond fantastic! Good luck and please let > me know if you want to talk about any of this more. I'd be happy to share. > , Mommy to Todd > > > > Quote
Guest guest Posted May 14, 2010 Report Posted May 14, 2010 , Thank you for all the info! My doctor sometimes 'pretends' to know what I'm talking about when I bring an article, but then I'm sure he does his research and make his own conclusions. Which is a good thing in the end. And now that I know, no matter what he says I leave the papers with him and if he likes the idea, next time I see him he "comes up" with it. I find that somehow funny. Hopefully you get some good news in June! Do you have pictures of the brace anywhere? Would you mind sharing them with me? You can email me privately if you like. Maybe they can do some kind of "hybrid" brace. Thank you again! From: D <dew.writes@...>infantile scoliosis treatment Sent: Wed, May 12, 2010 10:46:07 PMSubject: Re: Brace for high curve? Well, I am happy to help any way I can! Our boys with their high curves--I think you and I both are known by our docs as being "the lady that brings the papers"!! Nobody has all the answers yet, so we do what we have to do. ) It's hard to find info about the r-c brace online. I tried and tried prior to getting to VA for our brace-making appointments. It's a complicated thing--one thing I'd be certain to ask your orthotist is whether his TLSO will address the THREE dimensions of scoliosis, including rotation. (Incidentally, the r-c brace we got was billed as custom tlso.) For your reference, Todd's brace has one shoulder strap, which is made of velcro, to push down gently on his higher shoulder. The brace goes up really high under his lower shoulder. In his brace, his shoulders look really even and balanced. There are some "sling straps" inside the brace, which apply the pressure against his curves. These are padded and wrap around to the outside of the plastic, attaching with velcro on the outside. That makes them adjustable, which I think is way better than the Providence braces we had, which are not at all adjustable. Those things are a one-shot deal, with not much room to grow, especially when the problem curve is at the very top of the brace. Hang in there, and maybe this info will help you get some good questions formulated. I wish I'd had time to prepare and ask questions before Todd's first brace was attempted. That was a surprise--we went with the expectation that cast #8 would stay on him longer than his time in the OR! When the doc came out and told us what was going on, we were stunned. (The last 3 casts had given no lasting correction.) We were totally clueless about braces. You are doing GREAT with getting prepared!! Take care, On Wed, May 12, 2010 at 10:26 PM, Portas wrote: > > > Hi ! > > I have been looking for info about that brace since I first read about it > (probably from you). I even checked your blog. I printed everything I could > find about the RC brace and took it to my ortho. He said he had heard about > it but didn't have enough information about how effective it was and he > likes to go with things he knows work. (?). > > I'm in Canada, so it might be more difficult to get that kind of brace over > here. But I'll bring the info again to him and the orthotics specialist and > see what they say. The Dr. already calls me "the lady that brings the > papers" anyway... lol... > > Thank you very much... I might contact you later for some contact info to > bring with me too. > > > > > > > *From:* D > > *To:* infantile scoliosis treatment @groups. com > *Sent:* Wed, May 12, 2010 7:49:36 PM > > *Subject:* Re: [infantile_scoliosi s] Brace for high curve? > > > > Hi , I heartily encourage you to ask LOTS of questions! And to get > in touch with an orthotist who could tell you some info about the > Rigo-Cheneau brace. I don't know where you live, but there are two I know of > in the US. One is in California and one is in Fairfax, Virginia. If you want > contact info, please email me off-list at dew.writesgmail (DOT) com and I will > be happy to help. My son,. Todd, has a very high curve, too, at T5-T6. > Casting got him from 50 degrees to mid-20s (lying down). He was casted 8 > times; the last cast was made to give to the orthotist who works with our > casting doc. They made a TLSO from the cast, but it was a total disaster. > They had to trash it and start all over with casting him (not under > anesthesia) for a Providence brace (he was then too small for the Providence > frame). His curve is just at the outside of what the Providence brace can > address, but they didn't know anything else to try at the time. In the year > that he was in the Prov., his curves (he's an S) progressed about 10 degrees > each. We learned of the Rigo-Cheneau brace on our own, asked our doc, who > called the orthotist in VA to learn about it. He enthusiastically encouraged > us to give it a try. High curves are difficult to address--everyone will > tell you that. But we have to keep on trying all we can! The orthotist who > made Todd's R-C brace is absolutely wonderful. We adore working with him. We > go back for the first adjustments in June. We are on the right track with > this brace, but only time will tell whether it will give any correction. > Given our prior brace experience, I am only hoping for it to hold him > steady...anything more would be beyond fantastic! Good luck and please let > me know if you want to talk about any of this more. I'd be happy to share. > , Mommy to Todd > > > > Quote
Guest guest Posted May 14, 2010 Report Posted May 14, 2010 Hi , Liv's curves are very high too. We always had braces and casts with neck support. I just looked at Livs photo section on CAST and there isnt a pic of any of her braces, but I will dig around and find one if you would like to see it. Let me know. HRH > Hi, > > My son had a 40 degrees curve initially (diagnosed in March last year), > but it's a high curve. He has been in casts since August and some of them > have included neck support, with those we have had better correction (down > to 10 degrees in cast). > > Because my son also needs to have PT (he is 21 months, walking holding one > hand, but can't get up from the floor or sit down from standing) we are > going to have a brace break for the summer. He is going to be molded next > Friday before they put a cast on and then we will go into a brace (Yes, > I'm scared, but we need to try to improve his balance/strength). > > We were told they are probably make a TLSO for him. I'm worried about how > they can make it high enough to get correction. > > Has anybody seen a brace that goes so high? Can they " customize " a TLSO (I > have no idea what I'm talking about here, so I'm sorry if this is a stupid > question)? > > You all know we (parents) have to be on top of things, because nobody else > will be. So I'm thinking I'm going to have to give the orthotics > department all those details and hopefully I can get some suggestions. > > Thank you! > > > > > Quote
Guest guest Posted May 14, 2010 Report Posted May 14, 2010 Hi , Liv's curves are very high too. We always had braces and casts with neck support. I just looked at Livs photo section on CAST and there isnt a pic of any of her braces, but I will dig around and find one if you would like to see it. Let me know. HRH > Hi, > > My son had a 40 degrees curve initially (diagnosed in March last year), > but it's a high curve. He has been in casts since August and some of them > have included neck support, with those we have had better correction (down > to 10 degrees in cast). > > Because my son also needs to have PT (he is 21 months, walking holding one > hand, but can't get up from the floor or sit down from standing) we are > going to have a brace break for the summer. He is going to be molded next > Friday before they put a cast on and then we will go into a brace (Yes, > I'm scared, but we need to try to improve his balance/strength). > > We were told they are probably make a TLSO for him. I'm worried about how > they can make it high enough to get correction. > > Has anybody seen a brace that goes so high? Can they " customize " a TLSO (I > have no idea what I'm talking about here, so I'm sorry if this is a stupid > question)? > > You all know we (parents) have to be on top of things, because nobody else > will be. So I'm thinking I'm going to have to give the orthotics > department all those details and hopefully I can get some suggestions. > > Thank you! > > > > > Quote
Guest guest Posted May 15, 2010 Report Posted May 15, 2010 Good luck! the openings were great for us due to Noelle's reflux. Let me know how it goes!- Noelle's mommy, 3 years oldRochester NYCasted 8 times for 1 1/2 years and in first brace!reflux, mild plagiocephaly, mild torticollos, hypotonia, ligament laxity, suspected Ehler's Danlos III > > >>From: Portas >>Subject: [infantile_scoliosi s] Brace for high curve? >>infantile scoliosis treatment @groups. com >>Date: Wednesday, May 12, 2010, 6:02 PM >> >> >> >>Hi, >> >>My son had a 40 degrees curve initially (diagnosed in March last year), but it's a high curve. He has been in casts since August and some of them have included neck support, with those we have had better correction (down to 10 degrees in cast). >> >>Because my son also needs to have PT (he is 21 months, walking holding one hand, but can't get up from the floor or sit down from standing) we are going to have a brace break for the summer. He is going to be molded next Friday before they put a cast on and then we will go into a brace (Yes, I'm scared, but we need to try to improve his balance/strength) . >> >>We were told they are probably make a TLSO for him. I'm worried about how they can make it high enough to get correction. >> >>Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I have no idea what I'm talking about here, so I'm sorry if this is a stupid question)? >> >>You all know we (parents) have to be on top of things, because nobody else will be. So I'm thinking I'm going to have to give the orthotics department all those details and hopefully I can get some suggestions. >> >>Thank you! >> >> >> >> > > Quote
Guest guest Posted May 19, 2010 Report Posted May 19, 2010 Hi ... I would like to see pictures if you have time to look. Hopefully I will be talking to the brace people this Friday when they do the molding and asking questions (giving suggestions) about how the brace is going to look. Sorry I've been having trouble opening emails for some reason (kept getting an error every time I tried to open one). High curves seem to be hard to work with... :-( Thanks a lot! From: "heather@..." <heather@...>infantile scoliosis treatment Sent: Fri, May 14, 2010 12:54:25 PMSubject: Re: Brace for high curve? Hi ,Liv's curves are very high too. We always had braces and casts with necksupport. I just looked at Livs photo section on CAST and there isnt a picof any of her braces, but I will dig around and find one if you would liketo see it.Let me know.HRH> Hi,>> My son had a 40 degrees curve initially (diagnosed in March last year),> but it's a high curve. He has been in casts since August and some of them> have included neck support, with those we have had better correction (down> to 10 degrees in cast).>> Because my son also needs to have PT (he is 21 months, walking holding one> hand, but can't get up from the floor or sit down from standing) we are> going to have a brace break for the summer. He is going to be molded next> Friday before they put a cast on and then we will go into a brace (Yes,> I'm scared, but we need to try to improve his balance/strength).>> We were told they are probably make a TLSO for him. I'm worried about how> they can make it high enough to get correction.>> Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I> have no idea what I'm talking about here, so I'm sorry if this is a stupid> question)?>> You all know we (parents) have to be on top of things, because nobody else> will be. So I'm thinking I'm going to have to give the orthotics> department all those details and hopefully I can get some suggestions.>> Thank you!>> >>> Quote
Guest guest Posted May 19, 2010 Report Posted May 19, 2010 Liam has reflux too, that's why I also want the openings. I will let you know what the plans are this Friday. Sorry it took me long to reply... my was acting funny. I had loooooooooooots of emails to go through. From: Kauffunger <slguerra710@...>infantile scoliosis treatment Sent: Fri, May 14, 2010 9:27:34 PMSubject: Re: Brace for high curve? Good luck! the openings were great for us due to Noelle's reflux. Let me know how it goes!- Noelle's mommy, 3 years oldRochester NYCasted 8 times for 1 1/2 years and in first brace!reflux, mild plagiocephaly, mild torticollos, hypotonia, ligament laxity, suspected Ehler's Danlos III > > >>From: Portas >>Subject: [infantile_scoliosi s] Brace for high curve? >>infantile scoliosis treatment @groups. com >>Date: Wednesday, May 12, 2010, 6:02 PM >> >> >> >>Hi, >> >>My son had a 40 degrees curve initially (diagnosed in March last year), but it's a high curve. He has been in casts since August and some of them have included neck support, with those we have had better correction (down to 10 degrees in cast). >> >>Because my son also needs to have PT (he is 21 months, walking holding one hand, but can't get up from the floor or sit down from standing) we are going to have a brace break for the summer. He is going to be molded next Friday before they put a cast on and then we will go into a brace (Yes, I'm scared, but we need to try to improve his balance/strength) . >> >>We were told they are probably make a TLSO for him. I'm worried about how they can make it high enough to get correction. >> >>Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I have no idea what I'm talking about here, so I'm sorry if this is a stupid question)? >> >>You all know we (parents) have to be on top of things, because nobody else will be. So I'm thinking I'm going to have to give the orthotics department all those details and hopefully I can get some suggestions. >> >>Thank you! >> >> >> >> > > Quote
Guest guest Posted May 19, 2010 Report Posted May 19, 2010 Hey , Im looking today and will forward to you by tomorrow. HRH From: infantile scoliosis treatment [mailto:infantile scoliosis treatment ] On Behalf Of Portas Sent: Wednesday, May 19, 2010 6:55 AM infantile scoliosis treatment Subject: Re: Brace for high curve? Hi ... I would like to see pictures if you have time to look. Hopefully I will be talking to the brace people this Friday when they do the molding and asking questions (giving suggestions) about how the brace is going to look. Sorry I've been having trouble opening emails for some reason (kept getting an error every time I tried to open one). High curves seem to be hard to work with... :-( Thanks a lot! From: " heather@... " <heather@...> infantile scoliosis treatment Sent: Fri, May 14, 2010 12:54:25 PM Subject: Re: Brace for high curve? Hi , Liv's curves are very high too. We always had braces and casts with neck support. I just looked at Livs photo section on CAST and there isnt a pic of any of her braces, but I will dig around and find one if you would like to see it. Let me know. HRH > Hi, > > My son had a 40 degrees curve initially (diagnosed in March last year), > but it's a high curve. He has been in casts since August and some of them > have included neck support, with those we have had better correction (down > to 10 degrees in cast). > > Because my son also needs to have PT (he is 21 months, walking holding one > hand, but can't get up from the floor or sit down from standing) we are > going to have a brace break for the summer. He is going to be molded next > Friday before they put a cast on and then we will go into a brace (Yes, > I'm scared, but we need to try to improve his balance/strength). > > We were told they are probably make a TLSO for him. I'm worried about how > they can make it high enough to get correction. > > Has anybody seen a brace that goes so high? Can they " customize " a TLSO (I > have no idea what I'm talking about here, so I'm sorry if this is a stupid > question)? > > You all know we (parents) have to be on top of things, because nobody else > will be. So I'm thinking I'm going to have to give the orthotics > department all those details and hopefully I can get some suggestions. > > Thank you! > > > > > Quote
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.