Jump to content
RemedySpot.com

Re: Brace for high curve?

Rate this topic


Recommended Posts

Guest guest
Posted

Hey ,

TLSO stands for Thoracic Lumbosacral Orthosis. They are all custom made, no two are identical. That's why they molded your son in order to make his. If you do a google image search for TLSO, you'll see they are all shapes and sizes, some include shoulder straps, others neck supports. So I'm sure they'll take that into consideration when making your son's brace.

Hugs! And yeah! you get to enjoy summer without a cast! ;)

Jane

From: Portas <ppdh72@...>infantile scoliosis treatment Sent: Wed, May 12, 2010 11:02:00 AMSubject: Brace for high curve?

Hi,My son had a 40 degrees curve initially (diagnosed in March last year), but it's a high curve. He has been in casts since August and some of them have included neck support, with those we have had better correction (down to 10 degrees in cast). Because my son also needs to have PT (he is 21 months, walking holding one hand, but can't get up from the floor or sit down from standing) we are going to have a brace break for the summer. He is going to be molded next Friday before they put a cast on and then we will go into a brace (Yes, I'm scared, but we need to try to improve his balance/strength) .We were told they are probably make a TLSO for him. I'm worried about how they can make it high enough to get correction. Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I have no idea what I'm talking about here, so I'm sorry if this is a stupid question)?You all know we (parents) have to be

on top of things, because nobody else will be. So I'm thinking I'm going to have to give the orthotics department all those details and hopefully I can get some suggestions.Thank you!

Guest guest
Posted

Thanks a lot Jane! I guess it was kind of a stupid question... lol... I know they are customized, but I thought maybe they had a frame they start from and then adjust it.

But that sounds good. Summer without a cast sounds good too. We'll see what we can do to enjoy it.

Thank you! I'll look at pictures for sure.

From: Jane Bigler <janemhar@...>infantile scoliosis treatment Sent: Wed, May 12, 2010 2:27:34 PMSubject: Re: Brace for high curve?

Hey ,

TLSO stands for Thoracic Lumbosacral Orthosis. They are all custom made, no two are identical. That's why they molded your son in order to make his. If you do a google image search for TLSO, you'll see they are all shapes and sizes, some include shoulder straps, others neck supports. So I'm sure they'll take that into consideration when making your son's brace.

Hugs! And yeah! you get to enjoy summer without a cast! ;)

Jane

From: Portas <ppdh72 (DOT) com>infantile scoliosis treatment @groups. comSent: Wed, May 12, 2010 11:02:00 AMSubject: [infantile_scoliosi s] Brace for high curve?

Hi,My son had a 40 degrees curve initially (diagnosed in March last year), but it's a high curve. He has been in casts since August and some of them have included neck support, with those we have had better correction (down to 10 degrees in cast). Because my son also needs to have PT (he is 21 months, walking holding one hand, but can't get up from the floor or sit down from standing) we are going to have a brace break for the summer. He is going to be molded next Friday before they put a cast on and then we will go into a brace (Yes, I'm scared, but we need to try to improve his balance/strength) .We were told they are probably make a TLSO for him. I'm worried about how they can make it high enough to get correction. Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I have no idea what I'm talking about here, so I'm sorry if this is a stupid question)?You all know we (parents) have to be

on top of things, because nobody else will be. So I'm thinking I'm going to have to give the orthotics department all those details and hopefully I can get some suggestions.Thank you!

Guest guest
Posted

,

I'm not a doc, but here are my thoughts on this. I would absolutly ask those questions of your ortho. Noelle's brace was made from a mold of her body. She was put under anesthesia and a cast was made and the brace was molded from that. Her brace looks very much like her cast and because of how it was molded, customized specifically for her. You definately couldn't put her brace on someone else. I think the majority of braces are made this way. I hope this eases your mind a bit.... - Noelle's mommy, 3 years oldRochester NYCasted 8 times for 1 1/2 years and in first brace!reflux, mild plagiocephaly, mild torticollos, hypotonia, ligament laxity, suspected Ehler's Danlos III

From: Portas <ppdh72@...>Subject: Brace for high curve?infantile scoliosis treatment Date: Wednesday, May 12, 2010, 6:02 PM

Hi,My son had a 40 degrees curve initially (diagnosed in March last year), but it's a high curve. He has been in casts since August and some of them have included neck support, with those we have had better correction (down to 10 degrees in cast). Because my son also needs to have PT (he is 21 months, walking holding one hand, but can't get up from the floor or sit down from standing) we are going to have a brace break for the summer. He is going to be molded next Friday before they put a cast on and then we will go into a brace (Yes, I'm scared, but we need to try to improve his balance/strength) .We were told they are probably make a TLSO for him. I'm worried about how they can make it high enough to get correction. Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I have no idea what I'm talking about here, so I'm sorry if this is a stupid question)?You all know we (parents) have to

be on top of things, because nobody else will be. So I'm thinking I'm going to have to give the orthotics department all those details and hopefully I can get some suggestions.Thank you!

Guest guest
Posted

It is not a stupid question at all . We are very new to braces too and I asked tons of questions when we got ours last week. Nothing wrong with asking. Hope he adjusts to his brace quickly. Joanmom to Hayden 339 degrees down from 62Cast number 4Treated at ish Rite Hospital Dallas, TX

From: Portas <ppdh72@...>infantile scoliosis treatment Sent: Wed, May 12, 2010 1:32:42 PMSubject: Re: Brace for high curve?

Thanks a lot Jane! I guess it was kind of a stupid question... lol... I know they are customized, but I thought maybe they had a frame they start from and then adjust it.

But that sounds good. Summer without a cast sounds good too. We'll see what we can do to enjoy it.

Thank you! I'll look at pictures for sure.

From: Jane Bigler <janemhar (DOT) com>infantile scoliosis treatment @groups. comSent: Wed, May 12, 2010 2:27:34 PMSubject: Re: [infantile_scoliosi s] Brace for high curve?

Hey ,

TLSO stands for Thoracic Lumbosacral Orthosis. They are all custom made, no two are identical. That's why they molded your son in order to make his. If you do a google image search for TLSO, you'll see they are all shapes and sizes, some include shoulder straps, others neck supports. So I'm sure they'll take that into consideration when making your son's brace.

Hugs! And yeah! you get to enjoy summer without a cast! ;)

Jane

From: Portas <ppdh72 (DOT) com>infantile scoliosis treatment @groups. comSent: Wed, May 12, 2010 11:02:00 AMSubject: [infantile_scoliosi s] Brace for high curve?

Hi,My son had a 40 degrees curve initially (diagnosed in March last year), but it's a high curve. He has been in casts since August and some of them have included neck support, with those we have had better correction (down to 10 degrees in cast). Because my son also needs to have PT (he is 21 months, walking holding one hand, but can't get up from the floor or sit down from standing) we are going to have a brace break for the summer. He is going to be molded next Friday before they put a cast on and then we will go into a brace (Yes, I'm scared, but we need to try to improve his balance/strength) .We were told they are probably make a TLSO for him. I'm worried about how they can make it high enough to get correction. Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I have no idea what I'm talking about here, so I'm sorry if this is a stupid question)?You all know we (parents) have to be

on top of things, because nobody else will be. So I'm thinking I'm going to have to give the orthotics department all those details and hopefully I can get some suggestions.Thank you!

Guest guest
Posted

Ditto...the only stupid question, is the one not asked. ;)

Jane

From: Joan Vallee <hayro1611@...>infantile scoliosis treatment Sent: Wed, May 12, 2010 1:49:03 PMSubject: Re: Brace for high curve?

It is not a stupid question at all . We are very new to braces too and I asked tons of questions when we got ours last week. Nothing wrong with asking. Hope he adjusts to his brace quickly. Joanmom to Hayden 339 degrees down from 62Cast number 4Treated at ish Rite Hospital Dallas, TX

From: Portas <ppdh72 (DOT) com>infantile scoliosis treatment @groups. comSent: Wed, May 12, 2010 1:32:42 PMSubject: Re: [infantile_scoliosi s] Brace for high curve?

Thanks a lot Jane! I guess it was kind of a stupid question... lol... I know they are customized, but I thought maybe they had a frame they start from and then adjust it.

But that sounds good. Summer without a cast sounds good too. We'll see what we can do to enjoy it.

Thank you! I'll look at pictures for sure.

From: Jane Bigler <janemhar (DOT) com>infantile scoliosis treatment @groups. comSent: Wed, May 12, 2010 2:27:34 PMSubject: Re: [infantile_scoliosi s] Brace for high curve?

Hey ,

TLSO stands for Thoracic Lumbosacral Orthosis. They are all custom made, no two are identical. That's why they molded your son in order to make his. If you do a google image search for TLSO, you'll see they are all shapes and sizes, some include shoulder straps, others neck supports. So I'm sure they'll take that into consideration when making your son's brace.

Hugs! And yeah! you get to enjoy summer without a cast! ;)

Jane

From: Portas <ppdh72 (DOT) com>infantile scoliosis treatment @groups. comSent: Wed, May 12, 2010 11:02:00 AMSubject: [infantile_scoliosi s] Brace for high curve?

Hi,My son had a 40 degrees curve initially (diagnosed in March last year), but it's a high curve. He has been in casts since August and some of them have included neck support, with those we have had better correction (down to 10 degrees in cast). Because my son also needs to have PT (he is 21 months, walking holding one hand, but can't get up from the floor or sit down from standing) we are going to have a brace break for the summer. He is going to be molded next Friday before they put a cast on and then we will go into a brace (Yes, I'm scared, but we need to try to improve his balance/strength) .We were told they are probably make a TLSO for him. I'm worried about how they can make it high enough to get correction. Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I have no idea what I'm talking about here, so I'm sorry if this is a stupid question)?You all know we (parents) have to be

on top of things, because nobody else will be. So I'm thinking I'm going to have to give the orthotics department all those details and hopefully I can get some suggestions.Thank you!

Guest guest
Posted

Hi ,

 

I heartily encourage you to ask LOTS of questions!  And to get in touch with an orthotist who could tell you some info about the Rigo-Cheneau brace.  I don't know where you live, but there are two I know of in the US.  One is in California and one is in Fairfax, Virginia.  If you want contact info, please email me off-list at dew.writes@... and I will be happy to help.

 

My son,. Todd, has a very high curve, too, at T5-T6. Casting got him from 50 degrees to mid-20s (lying down).  He was casted 8 times; the last cast was made to give to the orthotist who works with our casting doc.  They made a TLSO from the cast, but it was a total disaster.  They had to trash it and start all over with casting him (not under anesthesia) for a Providence brace (he was then too small for the Providence frame).  His curve is just at the outside of what the Providence brace can address, but they didn't know anything else to try at the time.  In the year that he was in the Prov., his curves (he's an S) progressed about 10 degrees each.

 

We learned of the Rigo-Cheneau brace on our own, asked our doc, who called the orthotist in VA to learn about it.  He enthusiastically encouraged us to give it a try.

 

High curves are difficult to address--everyone will tell you that.  But we have to keep on trying all we can!

 

The orthotist who made Todd's R-C brace is absolutely wonderful.  We adore working with him.  We go back for the first adjustments in June.  We are on the right track with this brace, but only time will tell whether it will give any correction.  Given our prior brace experience, I am only hoping for it to hold him steady...anything more would be beyond fantastic!

 

Good luck and please let me know if you want to talk about any of this more.  I'd be happy to share.

 

, Mommy to Todd

Guest guest
Posted

Thanks Joan... sometimes even the doctors are not sure what the best options are (probably because the BEST option doesn't exist).

We'll see how it goes...

From: Joan Vallee <hayro1611@...>infantile scoliosis treatment Sent: Wed, May 12, 2010 4:49:03 PMSubject: Re: Brace for high curve?

It is not a stupid question at all . We are very new to braces too and I asked tons of questions when we got ours last week. Nothing wrong with asking. Hope he adjusts to his brace quickly. Joanmom to Hayden 339 degrees down from 62Cast number 4Treated at ish Rite Hospital Dallas, TX

From: Portas <ppdh72 (DOT) com>infantile scoliosis treatment @groups. comSent: Wed, May 12, 2010 1:32:42 PMSubject: Re: [infantile_scoliosi s] Brace for high curve?

Thanks a lot Jane! I guess it was kind of a stupid question... lol... I know they are customized, but I thought maybe they had a frame they start from and then adjust it.

But that sounds good. Summer without a cast sounds good too. We'll see what we can do to enjoy it.

Thank you! I'll look at pictures for sure.

From: Jane Bigler <janemhar (DOT) com>infantile scoliosis treatment @groups. comSent: Wed, May 12, 2010 2:27:34 PMSubject: Re: [infantile_scoliosi s] Brace for high curve?

Hey ,

TLSO stands for Thoracic Lumbosacral Orthosis. They are all custom made, no two are identical. That's why they molded your son in order to make his. If you do a google image search for TLSO, you'll see they are all shapes and sizes, some include shoulder straps, others neck supports. So I'm sure they'll take that into consideration when making your son's brace.

Hugs! And yeah! you get to enjoy summer without a cast! ;)

Jane

From: Portas <ppdh72 (DOT) com>infantile scoliosis treatment @groups. comSent: Wed, May 12, 2010 11:02:00 AMSubject: [infantile_scoliosi s] Brace for high curve?

Hi,My son had a 40 degrees curve initially (diagnosed in March last year), but it's a high curve. He has been in casts since August and some of them have included neck support, with those we have had better correction (down to 10 degrees in cast). Because my son also needs to have PT (he is 21 months, walking holding one hand, but can't get up from the floor or sit down from standing) we are going to have a brace break for the summer. He is going to be molded next Friday before they put a cast on and then we will go into a brace (Yes, I'm scared, but we need to try to improve his balance/strength) .We were told they are probably make a TLSO for him. I'm worried about how they can make it high enough to get correction. Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I have no idea what I'm talking about here, so I'm sorry if this is a stupid question)?You all know we (parents) have to be

on top of things, because nobody else will be. So I'm thinking I'm going to have to give the orthotics department all those details and hopefully I can get some suggestions.Thank you!

Guest guest
Posted

Thanks Joan... sometimes even the doctors are not sure what the best options are (probably because the BEST option doesn't exist).

We'll see how it goes...

From: Joan Vallee <hayro1611@...>infantile scoliosis treatment Sent: Wed, May 12, 2010 4:49:03 PMSubject: Re: Brace for high curve?

It is not a stupid question at all . We are very new to braces too and I asked tons of questions when we got ours last week. Nothing wrong with asking. Hope he adjusts to his brace quickly. Joanmom to Hayden 339 degrees down from 62Cast number 4Treated at ish Rite Hospital Dallas, TX

From: Portas <ppdh72 (DOT) com>infantile scoliosis treatment @groups. comSent: Wed, May 12, 2010 1:32:42 PMSubject: Re: [infantile_scoliosi s] Brace for high curve?

Thanks a lot Jane! I guess it was kind of a stupid question... lol... I know they are customized, but I thought maybe they had a frame they start from and then adjust it.

But that sounds good. Summer without a cast sounds good too. We'll see what we can do to enjoy it.

Thank you! I'll look at pictures for sure.

From: Jane Bigler <janemhar (DOT) com>infantile scoliosis treatment @groups. comSent: Wed, May 12, 2010 2:27:34 PMSubject: Re: [infantile_scoliosi s] Brace for high curve?

Hey ,

TLSO stands for Thoracic Lumbosacral Orthosis. They are all custom made, no two are identical. That's why they molded your son in order to make his. If you do a google image search for TLSO, you'll see they are all shapes and sizes, some include shoulder straps, others neck supports. So I'm sure they'll take that into consideration when making your son's brace.

Hugs! And yeah! you get to enjoy summer without a cast! ;)

Jane

From: Portas <ppdh72 (DOT) com>infantile scoliosis treatment @groups. comSent: Wed, May 12, 2010 11:02:00 AMSubject: [infantile_scoliosi s] Brace for high curve?

Hi,My son had a 40 degrees curve initially (diagnosed in March last year), but it's a high curve. He has been in casts since August and some of them have included neck support, with those we have had better correction (down to 10 degrees in cast). Because my son also needs to have PT (he is 21 months, walking holding one hand, but can't get up from the floor or sit down from standing) we are going to have a brace break for the summer. He is going to be molded next Friday before they put a cast on and then we will go into a brace (Yes, I'm scared, but we need to try to improve his balance/strength) .We were told they are probably make a TLSO for him. I'm worried about how they can make it high enough to get correction. Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I have no idea what I'm talking about here, so I'm sorry if this is a stupid question)?You all know we (parents) have to be

on top of things, because nobody else will be. So I'm thinking I'm going to have to give the orthotics department all those details and hopefully I can get some suggestions.Thank you!

Guest guest
Posted

Thanks Joan... sometimes even the doctors are not sure what the best options are (probably because the BEST option doesn't exist).

We'll see how it goes...

From: Joan Vallee <hayro1611@...>infantile scoliosis treatment Sent: Wed, May 12, 2010 4:49:03 PMSubject: Re: Brace for high curve?

It is not a stupid question at all . We are very new to braces too and I asked tons of questions when we got ours last week. Nothing wrong with asking. Hope he adjusts to his brace quickly. Joanmom to Hayden 339 degrees down from 62Cast number 4Treated at ish Rite Hospital Dallas, TX

From: Portas <ppdh72 (DOT) com>infantile scoliosis treatment @groups. comSent: Wed, May 12, 2010 1:32:42 PMSubject: Re: [infantile_scoliosi s] Brace for high curve?

Thanks a lot Jane! I guess it was kind of a stupid question... lol... I know they are customized, but I thought maybe they had a frame they start from and then adjust it.

But that sounds good. Summer without a cast sounds good too. We'll see what we can do to enjoy it.

Thank you! I'll look at pictures for sure.

From: Jane Bigler <janemhar (DOT) com>infantile scoliosis treatment @groups. comSent: Wed, May 12, 2010 2:27:34 PMSubject: Re: [infantile_scoliosi s] Brace for high curve?

Hey ,

TLSO stands for Thoracic Lumbosacral Orthosis. They are all custom made, no two are identical. That's why they molded your son in order to make his. If you do a google image search for TLSO, you'll see they are all shapes and sizes, some include shoulder straps, others neck supports. So I'm sure they'll take that into consideration when making your son's brace.

Hugs! And yeah! you get to enjoy summer without a cast! ;)

Jane

From: Portas <ppdh72 (DOT) com>infantile scoliosis treatment @groups. comSent: Wed, May 12, 2010 11:02:00 AMSubject: [infantile_scoliosi s] Brace for high curve?

Hi,My son had a 40 degrees curve initially (diagnosed in March last year), but it's a high curve. He has been in casts since August and some of them have included neck support, with those we have had better correction (down to 10 degrees in cast). Because my son also needs to have PT (he is 21 months, walking holding one hand, but can't get up from the floor or sit down from standing) we are going to have a brace break for the summer. He is going to be molded next Friday before they put a cast on and then we will go into a brace (Yes, I'm scared, but we need to try to improve his balance/strength) .We were told they are probably make a TLSO for him. I'm worried about how they can make it high enough to get correction. Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I have no idea what I'm talking about here, so I'm sorry if this is a stupid question)?You all know we (parents) have to be

on top of things, because nobody else will be. So I'm thinking I'm going to have to give the orthotics department all those details and hopefully I can get some suggestions.Thank you!

Guest guest
Posted

Hi ... That's how they are going to do it. Next Friday we change the cast again and they are going to do the mold for the brace. That was supposed to happen at the last cast change (2 months ago) but it didn't (it was not arranged as expected).

I will ask all the questions, I just want to talk to the people making the brace (they are form a different hospital) and make sure the brace has the openings in the front & back and ask if it's going to be over the shoulder.

Thanks a lot!!!

From: Kauffunger <slguerra710@...>infantile scoliosis treatment Sent: Wed, May 12, 2010 4:05:15 PMSubject: Re: Brace for high curve?

,

I'm not a doc, but here are my thoughts on this. I would absolutly ask those questions of your ortho. Noelle's brace was made from a mold of her body. She was put under anesthesia and a cast was made and the brace was molded from that. Her brace looks very much like her cast and because of how it was molded, customized specifically for her. You definately couldn't put her brace on someone else. I think the majority of braces are made this way. I hope this eases your mind a bit.... - Noelle's mommy, 3 years oldRochester NYCasted 8 times for 1 1/2 years and in first brace!reflux, mild plagiocephaly, mild torticollos, hypotonia, ligament laxity, suspected Ehler's Danlos III

From: Portas <ppdh72 (DOT) com>Subject: [infantile_scoliosi s] Brace for high curve?infantile scoliosis treatment @groups. comDate: Wednesday, May 12, 2010, 6:02 PM

Hi,My son had a 40 degrees curve initially (diagnosed in March last year), but it's a high curve. He has been in casts since August and some of them have included neck support, with those we have had better correction (down to 10 degrees in cast). Because my son also needs to have PT (he is 21 months, walking holding one hand, but can't get up from the floor or sit down from standing) we are going to have a brace break for the summer. He is going to be molded next Friday before they put a cast on and then we will go into a brace (Yes, I'm scared, but we need to try to improve his balance/strength) .We were told they are probably make a TLSO for him. I'm worried about how they can make it high enough to get correction. Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I have no idea what I'm talking about here, so I'm sorry if this is a stupid question)?You all know we (parents) have to

be on top of things, because nobody else will be. So I'm thinking I'm going to have to give the orthotics department all those details and hopefully I can get some suggestions.Thank you!

Guest guest
Posted

Hi ... That's how they are going to do it. Next Friday we change the cast again and they are going to do the mold for the brace. That was supposed to happen at the last cast change (2 months ago) but it didn't (it was not arranged as expected).

I will ask all the questions, I just want to talk to the people making the brace (they are form a different hospital) and make sure the brace has the openings in the front & back and ask if it's going to be over the shoulder.

Thanks a lot!!!

From: Kauffunger <slguerra710@...>infantile scoliosis treatment Sent: Wed, May 12, 2010 4:05:15 PMSubject: Re: Brace for high curve?

,

I'm not a doc, but here are my thoughts on this. I would absolutly ask those questions of your ortho. Noelle's brace was made from a mold of her body. She was put under anesthesia and a cast was made and the brace was molded from that. Her brace looks very much like her cast and because of how it was molded, customized specifically for her. You definately couldn't put her brace on someone else. I think the majority of braces are made this way. I hope this eases your mind a bit.... - Noelle's mommy, 3 years oldRochester NYCasted 8 times for 1 1/2 years and in first brace!reflux, mild plagiocephaly, mild torticollos, hypotonia, ligament laxity, suspected Ehler's Danlos III

From: Portas <ppdh72 (DOT) com>Subject: [infantile_scoliosi s] Brace for high curve?infantile scoliosis treatment @groups. comDate: Wednesday, May 12, 2010, 6:02 PM

Hi,My son had a 40 degrees curve initially (diagnosed in March last year), but it's a high curve. He has been in casts since August and some of them have included neck support, with those we have had better correction (down to 10 degrees in cast). Because my son also needs to have PT (he is 21 months, walking holding one hand, but can't get up from the floor or sit down from standing) we are going to have a brace break for the summer. He is going to be molded next Friday before they put a cast on and then we will go into a brace (Yes, I'm scared, but we need to try to improve his balance/strength) .We were told they are probably make a TLSO for him. I'm worried about how they can make it high enough to get correction. Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I have no idea what I'm talking about here, so I'm sorry if this is a stupid question)?You all know we (parents) have to

be on top of things, because nobody else will be. So I'm thinking I'm going to have to give the orthotics department all those details and hopefully I can get some suggestions.Thank you!

Guest guest
Posted

Hi ... That's how they are going to do it. Next Friday we change the cast again and they are going to do the mold for the brace. That was supposed to happen at the last cast change (2 months ago) but it didn't (it was not arranged as expected).

I will ask all the questions, I just want to talk to the people making the brace (they are form a different hospital) and make sure the brace has the openings in the front & back and ask if it's going to be over the shoulder.

Thanks a lot!!!

From: Kauffunger <slguerra710@...>infantile scoliosis treatment Sent: Wed, May 12, 2010 4:05:15 PMSubject: Re: Brace for high curve?

,

I'm not a doc, but here are my thoughts on this. I would absolutly ask those questions of your ortho. Noelle's brace was made from a mold of her body. She was put under anesthesia and a cast was made and the brace was molded from that. Her brace looks very much like her cast and because of how it was molded, customized specifically for her. You definately couldn't put her brace on someone else. I think the majority of braces are made this way. I hope this eases your mind a bit.... - Noelle's mommy, 3 years oldRochester NYCasted 8 times for 1 1/2 years and in first brace!reflux, mild plagiocephaly, mild torticollos, hypotonia, ligament laxity, suspected Ehler's Danlos III

From: Portas <ppdh72 (DOT) com>Subject: [infantile_scoliosi s] Brace for high curve?infantile scoliosis treatment @groups. comDate: Wednesday, May 12, 2010, 6:02 PM

Hi,My son had a 40 degrees curve initially (diagnosed in March last year), but it's a high curve. He has been in casts since August and some of them have included neck support, with those we have had better correction (down to 10 degrees in cast). Because my son also needs to have PT (he is 21 months, walking holding one hand, but can't get up from the floor or sit down from standing) we are going to have a brace break for the summer. He is going to be molded next Friday before they put a cast on and then we will go into a brace (Yes, I'm scared, but we need to try to improve his balance/strength) .We were told they are probably make a TLSO for him. I'm worried about how they can make it high enough to get correction. Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I have no idea what I'm talking about here, so I'm sorry if this is a stupid question)?You all know we (parents) have to

be on top of things, because nobody else will be. So I'm thinking I'm going to have to give the orthotics department all those details and hopefully I can get some suggestions.Thank you!

Guest guest
Posted

Hi !

I have been looking for info about that brace since I first read about it (probably from you). I even checked your blog. I printed everything I could find about the RC brace and took it to my ortho. He said he had heard about it but didn't have enough information about how effective it was and he likes to go with things he knows work. (?).

I'm in Canada, so it might be more difficult to get that kind of brace over here. But I'll bring the info again to him and the orthotics specialist and see what they say. The Dr. already calls me "the lady that brings the papers" anyway... lol...

Thank you very much... I might contact you later for some contact info to bring with me too.

From: D <dew.writes@...>infantile scoliosis treatment Sent: Wed, May 12, 2010 7:49:36 PMSubject: Re: Brace for high curve?

Hi , I heartily encourage you to ask LOTS of questions! And to get in touch with an orthotist who could tell you some info about the Rigo-Cheneau brace. I don't know where you live, but there are two I know of in the US. One is in California and one is in Fairfax, Virginia. If you want contact info, please email me off-list at dew.writesgmail (DOT) com and I will be happy to help. My son,. Todd, has a very high curve, too, at T5-T6. Casting got him from 50 degrees to mid-20s (lying down). He was casted 8 times; the last cast was made to give to the orthotist who works with our casting doc. They made a TLSO from the cast, but it was a total disaster. They had to trash it and start all over with casting him (not under anesthesia) for a Providence brace (he was then too small for the Providence frame). His curve is just at the outside of what the Providence brace can address, but they didn't know anything else to try at the time. In the year that he

was in the Prov., his curves (he's an S) progressed about 10 degrees each. We learned of the Rigo-Cheneau brace on our own, asked our doc, who called the orthotist in VA to learn about it. He enthusiastically encouraged us to give it a try. High curves are difficult to address--everyone will tell you that. But we have to keep on trying all we can! The orthotist who made Todd's R-C brace is absolutely wonderful. We adore working with him. We go back for the first adjustments in June. We are on the right track with this brace, but only time will tell whether it will give any correction. Given our prior brace experience, I am only hoping for it to hold him steady...anything more would be beyond fantastic! Good luck and please let me know if you want to talk about any of this more. I'd be happy to share. , Mommy to Todd

Guest guest
Posted

Hi !

I have been looking for info about that brace since I first read about it (probably from you). I even checked your blog. I printed everything I could find about the RC brace and took it to my ortho. He said he had heard about it but didn't have enough information about how effective it was and he likes to go with things he knows work. (?).

I'm in Canada, so it might be more difficult to get that kind of brace over here. But I'll bring the info again to him and the orthotics specialist and see what they say. The Dr. already calls me "the lady that brings the papers" anyway... lol...

Thank you very much... I might contact you later for some contact info to bring with me too.

From: D <dew.writes@...>infantile scoliosis treatment Sent: Wed, May 12, 2010 7:49:36 PMSubject: Re: Brace for high curve?

Hi , I heartily encourage you to ask LOTS of questions! And to get in touch with an orthotist who could tell you some info about the Rigo-Cheneau brace. I don't know where you live, but there are two I know of in the US. One is in California and one is in Fairfax, Virginia. If you want contact info, please email me off-list at dew.writesgmail (DOT) com and I will be happy to help. My son,. Todd, has a very high curve, too, at T5-T6. Casting got him from 50 degrees to mid-20s (lying down). He was casted 8 times; the last cast was made to give to the orthotist who works with our casting doc. They made a TLSO from the cast, but it was a total disaster. They had to trash it and start all over with casting him (not under anesthesia) for a Providence brace (he was then too small for the Providence frame). His curve is just at the outside of what the Providence brace can address, but they didn't know anything else to try at the time. In the year that he

was in the Prov., his curves (he's an S) progressed about 10 degrees each. We learned of the Rigo-Cheneau brace on our own, asked our doc, who called the orthotist in VA to learn about it. He enthusiastically encouraged us to give it a try. High curves are difficult to address--everyone will tell you that. But we have to keep on trying all we can! The orthotist who made Todd's R-C brace is absolutely wonderful. We adore working with him. We go back for the first adjustments in June. We are on the right track with this brace, but only time will tell whether it will give any correction. Given our prior brace experience, I am only hoping for it to hold him steady...anything more would be beyond fantastic! Good luck and please let me know if you want to talk about any of this more. I'd be happy to share. , Mommy to Todd

Guest guest
Posted

Hi !

I have been looking for info about that brace since I first read about it (probably from you). I even checked your blog. I printed everything I could find about the RC brace and took it to my ortho. He said he had heard about it but didn't have enough information about how effective it was and he likes to go with things he knows work. (?).

I'm in Canada, so it might be more difficult to get that kind of brace over here. But I'll bring the info again to him and the orthotics specialist and see what they say. The Dr. already calls me "the lady that brings the papers" anyway... lol...

Thank you very much... I might contact you later for some contact info to bring with me too.

From: D <dew.writes@...>infantile scoliosis treatment Sent: Wed, May 12, 2010 7:49:36 PMSubject: Re: Brace for high curve?

Hi , I heartily encourage you to ask LOTS of questions! And to get in touch with an orthotist who could tell you some info about the Rigo-Cheneau brace. I don't know where you live, but there are two I know of in the US. One is in California and one is in Fairfax, Virginia. If you want contact info, please email me off-list at dew.writesgmail (DOT) com and I will be happy to help. My son,. Todd, has a very high curve, too, at T5-T6. Casting got him from 50 degrees to mid-20s (lying down). He was casted 8 times; the last cast was made to give to the orthotist who works with our casting doc. They made a TLSO from the cast, but it was a total disaster. They had to trash it and start all over with casting him (not under anesthesia) for a Providence brace (he was then too small for the Providence frame). His curve is just at the outside of what the Providence brace can address, but they didn't know anything else to try at the time. In the year that he

was in the Prov., his curves (he's an S) progressed about 10 degrees each. We learned of the Rigo-Cheneau brace on our own, asked our doc, who called the orthotist in VA to learn about it. He enthusiastically encouraged us to give it a try. High curves are difficult to address--everyone will tell you that. But we have to keep on trying all we can! The orthotist who made Todd's R-C brace is absolutely wonderful. We adore working with him. We go back for the first adjustments in June. We are on the right track with this brace, but only time will tell whether it will give any correction. Given our prior brace experience, I am only hoping for it to hold him steady...anything more would be beyond fantastic! Good luck and please let me know if you want to talk about any of this more. I'd be happy to share. , Mommy to Todd

Guest guest
Posted

Well, I am happy to help any way I can!  Our boys with their high curves--I think you and I both are known by our docs as being " the lady that brings the papers " !!  Nobody has all the answers yet, so we do what we have to do.  :o) 

 

It's hard to find info about the r-c brace online.  I tried and tried prior to getting to VA for our brace-making appointments.  It's a complicated thing--one thing I'd be certain to ask your orthotist is whether his TLSO will address the THREE dimensions of scoliosis, including rotation.  (Incidentally, the r-c brace we got was billed as custom tlso.)

 

For your reference, Todd's brace has one shoulder strap, which is made of velcro, to push down gently on his higher shoulder.  The brace goes up really high under his lower shoulder.  In his brace, his shoulders look really even and balanced.  There are some " sling straps " inside the brace, which apply the pressure against his curves.  These are padded and wrap around to the outside of the plastic, attaching with velcro on the outside.  That makes them adjustable, which I think is way better than the Providence braces we had, which are not at all adjustable.  Those things are a one-shot deal, with not much room to grow, especially when the problem curve is at the very top of the brace. 

 

Hang in there, and maybe this info will help you get some good questions formulated.  I wish I'd had time to prepare and ask questions before Todd's first brace was attempted.  That was a surprise--we went with the expectation that cast #8 would stay on him longer than his time in the OR!  When the doc came out and told us what was going on, we were stunned.  (The last 3 casts had given no lasting correction.)  We were totally clueless about braces.  You are doing GREAT with getting prepared!! 

 

Take care,

On Wed, May 12, 2010 at 10:26 PM, Portas <ppdh72@...> wrote:

 

Hi !

 

I have been looking for info about that brace since I first read about it (probably from you). I even checked your blog. I printed everything I could find about the RC brace and took it to my ortho. He said he had heard about it but didn't have enough information about how effective it was and he likes to go with things he knows work. (?).

 

I'm in Canada, so it might be more difficult to get that kind of brace over here. But I'll bring the info again to him and the orthotics specialist and see what they say. The Dr. already calls me " the lady that brings the papers " anyway... lol...

 

Thank you very much... I might contact you later for some contact info to bring with me too.

 

 

From: D <dew.writes@...> infantile scoliosis treatment Sent: Wed, May 12, 2010 7:49:36 PM Subject: Re: Brace for high curve? 

Hi , I heartily encourage you to ask LOTS of questions! And to get in touch with an orthotist who could tell you some info about the Rigo-Cheneau brace. I don't know where you live, but there are two I know of in the US. One is in California and one is in Fairfax, Virginia. If you want contact info, please email me off-list at dew.writesgmail (DOT) com and I will be happy to help. My son,. Todd, has a very high curve, too, at T5-T6. Casting got him from 50 degrees to mid-20s (lying down). He was casted 8 times; the last cast was made to give to the orthotist who works with our casting doc. They made a TLSO from the cast, but it was a total disaster. They had to trash it and start all over with casting him (not under anesthesia) for a Providence brace (he was then too small for the Providence frame). His curve is just at the outside of what the Providence brace can address, but they didn't know anything else to try at the time. In the year that he was in the Prov., his curves (he's an S) progressed about 10 degrees each. We learned of the Rigo-Cheneau brace on our own, asked our doc, who called the orthotist in VA to learn about it. He enthusiastically encouraged us to give it a try. High curves are difficult to address--everyone will tell you that. But we have to keep on trying all we can! The orthotist who made Todd's R-C brace is absolutely wonderful. We adore working with him. We go back for the first adjustments in June. We are on the right track with this brace, but only time will tell whether it will give any correction. Given our prior brace experience, I am only hoping for it to hold him steady...anything more would be beyond fantastic! Good luck and please let me know if you want to talk about any of this more. I'd be happy to share. , Mommy to Todd

Guest guest
Posted

Well, I am happy to help any way I can!  Our boys with their high curves--I think you and I both are known by our docs as being " the lady that brings the papers " !!  Nobody has all the answers yet, so we do what we have to do.  :o) 

 

It's hard to find info about the r-c brace online.  I tried and tried prior to getting to VA for our brace-making appointments.  It's a complicated thing--one thing I'd be certain to ask your orthotist is whether his TLSO will address the THREE dimensions of scoliosis, including rotation.  (Incidentally, the r-c brace we got was billed as custom tlso.)

 

For your reference, Todd's brace has one shoulder strap, which is made of velcro, to push down gently on his higher shoulder.  The brace goes up really high under his lower shoulder.  In his brace, his shoulders look really even and balanced.  There are some " sling straps " inside the brace, which apply the pressure against his curves.  These are padded and wrap around to the outside of the plastic, attaching with velcro on the outside.  That makes them adjustable, which I think is way better than the Providence braces we had, which are not at all adjustable.  Those things are a one-shot deal, with not much room to grow, especially when the problem curve is at the very top of the brace. 

 

Hang in there, and maybe this info will help you get some good questions formulated.  I wish I'd had time to prepare and ask questions before Todd's first brace was attempted.  That was a surprise--we went with the expectation that cast #8 would stay on him longer than his time in the OR!  When the doc came out and told us what was going on, we were stunned.  (The last 3 casts had given no lasting correction.)  We were totally clueless about braces.  You are doing GREAT with getting prepared!! 

 

Take care,

On Wed, May 12, 2010 at 10:26 PM, Portas <ppdh72@...> wrote:

 

Hi !

 

I have been looking for info about that brace since I first read about it (probably from you). I even checked your blog. I printed everything I could find about the RC brace and took it to my ortho. He said he had heard about it but didn't have enough information about how effective it was and he likes to go with things he knows work. (?).

 

I'm in Canada, so it might be more difficult to get that kind of brace over here. But I'll bring the info again to him and the orthotics specialist and see what they say. The Dr. already calls me " the lady that brings the papers " anyway... lol...

 

Thank you very much... I might contact you later for some contact info to bring with me too.

 

 

From: D <dew.writes@...> infantile scoliosis treatment Sent: Wed, May 12, 2010 7:49:36 PM Subject: Re: Brace for high curve? 

Hi , I heartily encourage you to ask LOTS of questions! And to get in touch with an orthotist who could tell you some info about the Rigo-Cheneau brace. I don't know where you live, but there are two I know of in the US. One is in California and one is in Fairfax, Virginia. If you want contact info, please email me off-list at dew.writesgmail (DOT) com and I will be happy to help. My son,. Todd, has a very high curve, too, at T5-T6. Casting got him from 50 degrees to mid-20s (lying down). He was casted 8 times; the last cast was made to give to the orthotist who works with our casting doc. They made a TLSO from the cast, but it was a total disaster. They had to trash it and start all over with casting him (not under anesthesia) for a Providence brace (he was then too small for the Providence frame). His curve is just at the outside of what the Providence brace can address, but they didn't know anything else to try at the time. In the year that he was in the Prov., his curves (he's an S) progressed about 10 degrees each. We learned of the Rigo-Cheneau brace on our own, asked our doc, who called the orthotist in VA to learn about it. He enthusiastically encouraged us to give it a try. High curves are difficult to address--everyone will tell you that. But we have to keep on trying all we can! The orthotist who made Todd's R-C brace is absolutely wonderful. We adore working with him. We go back for the first adjustments in June. We are on the right track with this brace, but only time will tell whether it will give any correction. Given our prior brace experience, I am only hoping for it to hold him steady...anything more would be beyond fantastic! Good luck and please let me know if you want to talk about any of this more. I'd be happy to share. , Mommy to Todd

Guest guest
Posted

Well, I am happy to help any way I can!  Our boys with their high curves--I think you and I both are known by our docs as being " the lady that brings the papers " !!  Nobody has all the answers yet, so we do what we have to do.  :o) 

 

It's hard to find info about the r-c brace online.  I tried and tried prior to getting to VA for our brace-making appointments.  It's a complicated thing--one thing I'd be certain to ask your orthotist is whether his TLSO will address the THREE dimensions of scoliosis, including rotation.  (Incidentally, the r-c brace we got was billed as custom tlso.)

 

For your reference, Todd's brace has one shoulder strap, which is made of velcro, to push down gently on his higher shoulder.  The brace goes up really high under his lower shoulder.  In his brace, his shoulders look really even and balanced.  There are some " sling straps " inside the brace, which apply the pressure against his curves.  These are padded and wrap around to the outside of the plastic, attaching with velcro on the outside.  That makes them adjustable, which I think is way better than the Providence braces we had, which are not at all adjustable.  Those things are a one-shot deal, with not much room to grow, especially when the problem curve is at the very top of the brace. 

 

Hang in there, and maybe this info will help you get some good questions formulated.  I wish I'd had time to prepare and ask questions before Todd's first brace was attempted.  That was a surprise--we went with the expectation that cast #8 would stay on him longer than his time in the OR!  When the doc came out and told us what was going on, we were stunned.  (The last 3 casts had given no lasting correction.)  We were totally clueless about braces.  You are doing GREAT with getting prepared!! 

 

Take care,

On Wed, May 12, 2010 at 10:26 PM, Portas <ppdh72@...> wrote:

 

Hi !

 

I have been looking for info about that brace since I first read about it (probably from you). I even checked your blog. I printed everything I could find about the RC brace and took it to my ortho. He said he had heard about it but didn't have enough information about how effective it was and he likes to go with things he knows work. (?).

 

I'm in Canada, so it might be more difficult to get that kind of brace over here. But I'll bring the info again to him and the orthotics specialist and see what they say. The Dr. already calls me " the lady that brings the papers " anyway... lol...

 

Thank you very much... I might contact you later for some contact info to bring with me too.

 

 

From: D <dew.writes@...> infantile scoliosis treatment Sent: Wed, May 12, 2010 7:49:36 PM Subject: Re: Brace for high curve? 

Hi , I heartily encourage you to ask LOTS of questions! And to get in touch with an orthotist who could tell you some info about the Rigo-Cheneau brace. I don't know where you live, but there are two I know of in the US. One is in California and one is in Fairfax, Virginia. If you want contact info, please email me off-list at dew.writesgmail (DOT) com and I will be happy to help. My son,. Todd, has a very high curve, too, at T5-T6. Casting got him from 50 degrees to mid-20s (lying down). He was casted 8 times; the last cast was made to give to the orthotist who works with our casting doc. They made a TLSO from the cast, but it was a total disaster. They had to trash it and start all over with casting him (not under anesthesia) for a Providence brace (he was then too small for the Providence frame). His curve is just at the outside of what the Providence brace can address, but they didn't know anything else to try at the time. In the year that he was in the Prov., his curves (he's an S) progressed about 10 degrees each. We learned of the Rigo-Cheneau brace on our own, asked our doc, who called the orthotist in VA to learn about it. He enthusiastically encouraged us to give it a try. High curves are difficult to address--everyone will tell you that. But we have to keep on trying all we can! The orthotist who made Todd's R-C brace is absolutely wonderful. We adore working with him. We go back for the first adjustments in June. We are on the right track with this brace, but only time will tell whether it will give any correction. Given our prior brace experience, I am only hoping for it to hold him steady...anything more would be beyond fantastic! Good luck and please let me know if you want to talk about any of this more. I'd be happy to share. , Mommy to Todd

Guest guest
Posted

, our TLSO Boston brace does not have the mushroom cutout like the Mehta cast does, it just has a huge opening on one side. Let me know if they do an opening in front.. Joanmom to Hayden 339 degrees down from 62After 4 casts, now in a brace 23 hours/dayTreated at ish Rite Hospital Dallas, TX

From: Portas <ppdh72@...>infantile scoliosis treatment Sent: Wed, May 12, 2010 9:20:08 PMSubject: Re: Brace for high curve?

Hi ... That's how they are going to do it. Next Friday we change the cast again and they are going to do the mold for the brace. That was supposed to happen at the last cast change (2 months ago) but it didn't (it was not arranged as expected). I will ask all the questions, I just want to talk to the people making the brace (they are form a different hospital) and make sure the brace has the openings in the front back and ask if it's going to be over the shoulder. Thanks a lot!!! > >From: Kauffunger >infantile scoliosis treatment @groups. com >Sent: Wed, May 12, 2010 4:05:15 PM >Subject: Re: [infantile_scoliosi s] Brace for high curve? > > >, >I'm not a doc, but here are my thoughts on this. I would absolutly ask those questions of your ortho. Noelle's brace was made from a mold of her body. She was put under anesthesia and a cast was made and the brace was molded

from that. Her brace looks very much like her cast and because of how it was molded, customized specifically for her. You definately couldn't put her brace on someone else. I think the majority of braces are made this way. I hope this eases your mind a bit.... >- Noelle's mommy, 3 years old >Rochester NY >Casted 8 times for 1 1/2 years and in first brace! >reflux, mild plagiocephaly, mild torticollos, hypotonia, ligament laxity, suspected Ehler's Danlos III > > > > >>From: Portas >>Subject: [infantile_scoliosi s] Brace for high curve? >>infantile scoliosis treatment @groups. com >>Date: Wednesday, May 12, 2010, 6:02 PM >> >> >> >>Hi, >> >>My son had a 40 degrees curve initially (diagnosed in March last year), but it's a high curve. He has been in casts since August and some of

them have included neck support, with those we have had better correction (down to 10 degrees in cast). >> >>Because my son also needs to have PT (he is 21 months, walking holding one hand, but can't get up from the floor or sit down from standing) we are going to have a brace break for the summer. He is going to be molded next Friday before they put a cast on and then we will go into a brace (Yes, I'm scared, but we need to try to improve his balance/strength) . >> >>We were told they are probably make a TLSO for him. I'm worried about how they can make it high enough to get correction. >> >>Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I have no idea what I'm talking about here, so I'm sorry if this is a stupid question)? >> >>You all know we (parents) have to be on top of things, because nobody else will be. So I'm thinking I'm going to have to give the orthotics department

all those details and hopefully I can get some suggestions. >> >>Thank you! >> >> >> >> > >

Guest guest
Posted

, our TLSO Boston brace does not have the mushroom cutout like the Mehta cast does, it just has a huge opening on one side. Let me know if they do an opening in front.. Joanmom to Hayden 339 degrees down from 62After 4 casts, now in a brace 23 hours/dayTreated at ish Rite Hospital Dallas, TX

From: Portas <ppdh72@...>infantile scoliosis treatment Sent: Wed, May 12, 2010 9:20:08 PMSubject: Re: Brace for high curve?

Hi ... That's how they are going to do it. Next Friday we change the cast again and they are going to do the mold for the brace. That was supposed to happen at the last cast change (2 months ago) but it didn't (it was not arranged as expected). I will ask all the questions, I just want to talk to the people making the brace (they are form a different hospital) and make sure the brace has the openings in the front back and ask if it's going to be over the shoulder. Thanks a lot!!! > >From: Kauffunger >infantile scoliosis treatment @groups. com >Sent: Wed, May 12, 2010 4:05:15 PM >Subject: Re: [infantile_scoliosi s] Brace for high curve? > > >, >I'm not a doc, but here are my thoughts on this. I would absolutly ask those questions of your ortho. Noelle's brace was made from a mold of her body. She was put under anesthesia and a cast was made and the brace was molded

from that. Her brace looks very much like her cast and because of how it was molded, customized specifically for her. You definately couldn't put her brace on someone else. I think the majority of braces are made this way. I hope this eases your mind a bit.... >- Noelle's mommy, 3 years old >Rochester NY >Casted 8 times for 1 1/2 years and in first brace! >reflux, mild plagiocephaly, mild torticollos, hypotonia, ligament laxity, suspected Ehler's Danlos III > > > > >>From: Portas >>Subject: [infantile_scoliosi s] Brace for high curve? >>infantile scoliosis treatment @groups. com >>Date: Wednesday, May 12, 2010, 6:02 PM >> >> >> >>Hi, >> >>My son had a 40 degrees curve initially (diagnosed in March last year), but it's a high curve. He has been in casts since August and some of

them have included neck support, with those we have had better correction (down to 10 degrees in cast). >> >>Because my son also needs to have PT (he is 21 months, walking holding one hand, but can't get up from the floor or sit down from standing) we are going to have a brace break for the summer. He is going to be molded next Friday before they put a cast on and then we will go into a brace (Yes, I'm scared, but we need to try to improve his balance/strength) . >> >>We were told they are probably make a TLSO for him. I'm worried about how they can make it high enough to get correction. >> >>Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I have no idea what I'm talking about here, so I'm sorry if this is a stupid question)? >> >>You all know we (parents) have to be on top of things, because nobody else will be. So I'm thinking I'm going to have to give the orthotics department

all those details and hopefully I can get some suggestions. >> >>Thank you! >> >> >> >> > >

Guest guest
Posted

, our TLSO Boston brace does not have the mushroom cutout like the Mehta cast does, it just has a huge opening on one side. Let me know if they do an opening in front.. Joanmom to Hayden 339 degrees down from 62After 4 casts, now in a brace 23 hours/dayTreated at ish Rite Hospital Dallas, TX

From: Portas <ppdh72@...>infantile scoliosis treatment Sent: Wed, May 12, 2010 9:20:08 PMSubject: Re: Brace for high curve?

Hi ... That's how they are going to do it. Next Friday we change the cast again and they are going to do the mold for the brace. That was supposed to happen at the last cast change (2 months ago) but it didn't (it was not arranged as expected). I will ask all the questions, I just want to talk to the people making the brace (they are form a different hospital) and make sure the brace has the openings in the front back and ask if it's going to be over the shoulder. Thanks a lot!!! > >From: Kauffunger >infantile scoliosis treatment @groups. com >Sent: Wed, May 12, 2010 4:05:15 PM >Subject: Re: [infantile_scoliosi s] Brace for high curve? > > >, >I'm not a doc, but here are my thoughts on this. I would absolutly ask those questions of your ortho. Noelle's brace was made from a mold of her body. She was put under anesthesia and a cast was made and the brace was molded

from that. Her brace looks very much like her cast and because of how it was molded, customized specifically for her. You definately couldn't put her brace on someone else. I think the majority of braces are made this way. I hope this eases your mind a bit.... >- Noelle's mommy, 3 years old >Rochester NY >Casted 8 times for 1 1/2 years and in first brace! >reflux, mild plagiocephaly, mild torticollos, hypotonia, ligament laxity, suspected Ehler's Danlos III > > > > >>From: Portas >>Subject: [infantile_scoliosi s] Brace for high curve? >>infantile scoliosis treatment @groups. com >>Date: Wednesday, May 12, 2010, 6:02 PM >> >> >> >>Hi, >> >>My son had a 40 degrees curve initially (diagnosed in March last year), but it's a high curve. He has been in casts since August and some of

them have included neck support, with those we have had better correction (down to 10 degrees in cast). >> >>Because my son also needs to have PT (he is 21 months, walking holding one hand, but can't get up from the floor or sit down from standing) we are going to have a brace break for the summer. He is going to be molded next Friday before they put a cast on and then we will go into a brace (Yes, I'm scared, but we need to try to improve his balance/strength) . >> >>We were told they are probably make a TLSO for him. I'm worried about how they can make it high enough to get correction. >> >>Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I have no idea what I'm talking about here, so I'm sorry if this is a stupid question)? >> >>You all know we (parents) have to be on top of things, because nobody else will be. So I'm thinking I'm going to have to give the orthotics department

all those details and hopefully I can get some suggestions. >> >>Thank you! >> >> >> >> > >

Guest guest
Posted

I will!!! I'm not sure how long they will take to make it, but as soon as I know I'll let you know.

How long did they take to make Hayden's?

From: Joan Vallee <hayro1611@...>infantile scoliosis treatment Sent: Thu, May 13, 2010 8:28:13 AMSubject: Re: Brace for high curve?

, our TLSO Boston brace does not have the mushroom cutout like the Mehta cast does, it just has a huge opening on one side. Let me know if they do an opening in front.. Joan mom to Hayden 3 39 degrees down from 62 After 4 casts, now in a brace 23 hours/day Treated at ish Rite Hospital Dallas, TX ____________ _________ _________ __ From: Portas infantile scoliosis treatment @groups. com Sent: Wed, May 12, 2010 9:20:08 PM Subject: Re: [infantile_scoliosi s] Brace for high curve? Hi ... That's how they are going to do it. Next Friday we change the cast again and they are going to do the mold for the brace. That was supposed to happen at the last cast change (2 months ago) but it didn't (it was not arranged as expected). I will ask all the questions, I just want to talk to the people making the brace (they are form a different hospital) and make sure the brace has the openings in the front back and

ask if it's going to be over the shoulder. Thanks a lot!!! > >From: Kauffunger >infantile scoliosis treatment @groups. com >Sent: Wed, May 12, 2010 4:05:15 PM >Subject: Re: [infantile_scoliosi s] Brace for high curve? > > >, >I'm not a doc, but here are my thoughts on this. I would absolutly ask those questions of your ortho. Noelle's brace was made from a mold of her body. She was put under anesthesia and a cast was made and the brace was molded from that. Her brace looks very much like her cast and because of how it was molded, customized specifically for her. You definately couldn't put her brace on someone else. I think the majority of braces are made this way. I hope this eases your mind a bit.... >- Noelle's mommy, 3 years old >Rochester NY >Casted 8 times for 1 1/2 years and in first brace! >reflux, mild

plagiocephaly, mild torticollos, hypotonia, ligament laxity, suspected Ehler's Danlos III > > > > >>From: Portas >>Subject: [infantile_scoliosi s] Brace for high curve? >>infantile scoliosis treatment @groups. com >>Date: Wednesday, May 12, 2010, 6:02 PM >> >> >> >>Hi, >> >>My son had a 40 degrees curve initially (diagnosed in March last year), but it's a high curve. He has been in casts since August and some of them have included neck support, with those we have had better correction (down to 10 degrees in cast). >> >>Because my son also needs to have PT (he is 21 months, walking holding one hand, but can't get up from the floor or sit down from standing) we are going to have a brace break for the summer. He is going to be molded next Friday before they put a cast on and then we will go into a brace (Yes, I'm

scared, but we need to try to improve his balance/strength) . >> >>We were told they are probably make a TLSO for him. I'm worried about how they can make it high enough to get correction. >> >>Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I have no idea what I'm talking about here, so I'm sorry if this is a stupid question)? >> >>You all know we (parents) have to be on top of things, because nobody else will be. So I'm thinking I'm going to have to give the orthotics department all those details and hopefully I can get some suggestions. >> >>Thank you! >> >> >> >> > >

Guest guest
Posted

He was molded when he was casted in January so I am sure they had it for a while. When we went last week it was all ready but had to be adjusted multiple times which took a very long time. They had to make sure it fit "just right", so it took a while. Hopefully next time won't take so long. Joanmom to Hayden 339 degrees down from 62After 4 casts, now in a brace 23 hours/dayTreated at ish Rite Hospital Dallas, TX

From: Portas <ppdh72@...>infantile scoliosis treatment Sent: Thu, May 13, 2010 8:28:40 AMSubject: Re: Brace for high curve?

I will!!! I'm not sure how long they will take to make it, but as soon as I know I'll let you know. How long did they take to make Hayden's? > >From: Joan Vallee >infantile scoliosis treatment @groups. com >Sent: Thu, May 13, 2010 8:28:13 AM >Subject: Re: [infantile_scoliosi s] Brace for high curve? > > >, our TLSO Boston brace does not have the mushroom cutout like the Mehta cast does, it just has a huge opening on one side. Let me know if they do an opening in front.. Joan mom to Hayden 3 39 degrees down from 62 After 4 casts, now in a brace 23 hours/day Treated at ish Rite Hospital Dallas, TX ____________ _________ _________ __ From: Portas infantile scoliosis treatment @groups. com Sent: Wed, May 12, 2010 9:20:08 PM Subject: Re: [infantile_scoliosi s] Brace for high curve? Hi ... That's how they are going to do it. Next Friday we change the cast again and they

are going to do the mold for the brace. That was supposed to happen at the last cast change (2 months ago) but it didn't (it was not arranged as expected). I will ask all the questions, I just want to talk to the people making the brace (they are form a different hospital) and make sure the brace has the openings in the front back and ask if it's going to be over the shoulder. Thanks a lot!!! > >From: Kauffunger >infantile scoliosis treatment @groups. com >Sent: Wed, May 12, 2010 4:05:15 PM >Subject: Re: [infantile_scoliosi s] Brace for high curve? > > >, >I'm not a doc, but here are my thoughts on this. I would absolutly ask those questions of your ortho. Noelle's brace was made from a mold of her body. She was put under anesthesia and a cast was made and the brace was molded from that. Her brace looks very much like her cast and because of how it was molded,

customized specifically for her. You definately couldn't put her brace on someone else. I think the majority of braces are made this way. I hope this eases your mind a bit.... >- Noelle's mommy, 3 years old >Rochester NY >Casted 8 times for 1 1/2 years and in first brace! >reflux, mild plagiocephaly, mild torticollos, hypotonia, ligament laxity, suspected Ehler's Danlos III > > > > >>From: Portas >>Subject: [infantile_scoliosi s] Brace for high curve? >>infantile scoliosis treatment @groups. com >>Date: Wednesday, May 12, 2010, 6:02 PM >> >> >> >>Hi, >> >>My son had a 40 degrees curve initially (diagnosed in March last year), but it's a high curve. He has been in casts since August and some of them have included neck support, with those we have had better correction (down to 10

degrees in cast). >> >>Because my son also needs to have PT (he is 21 months, walking holding one hand, but can't get up from the floor or sit down from standing) we are going to have a brace break for the summer. He is going to be molded next Friday before they put a cast on and then we will go into a brace (Yes, I'm scared, but we need to try to improve his balance/strength) . >> >>We were told they are probably make a TLSO for him. I'm worried about how they can make it high enough to get correction. >> >>Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I have no idea what I'm talking about here, so I'm sorry if this is a stupid question)? >> >>You all know we (parents) have to be on top of things, because nobody else will be. So I'm thinking I'm going to have to give the orthotics department all those details and hopefully I can get some suggestions. >> >>Thank you!

>> >> >> >> > > >

Guest guest
Posted

Our TLSO does not have a cut out on the side. We have a small cit out where the rib humb is but they put and firm foam in the cut out. They did this to stop a sore from starting. Also it is a front close brace. mommy to Thaddeus Sent from my iPhoneOn May 13, 2010, at 5:28 AM, Joan Vallee <hayro1611@...> wrote:

, our TLSO Boston brace does not have the mushroom cutout like the Mehta cast does, it just has a huge opening on one side. Let me know if they do an opening in front.. Joanmom to Hayden 339 degrees down from 62After 4 casts, now in a brace 23 hours/dayTreated at ish Rite Hospital Dallas, TX

From: Portas <ppdh72 >infantile scoliosis treatment Sent: Wed, May 12, 2010 9:20:08 PMSubject: Re: Brace for high curve?

Hi ... That's how they are going to do it. Next Friday we change the cast again and they are going to do the mold for the brace. That was supposed to happen at the last cast change (2 months ago) but it didn't (it was not arranged as expected). I will ask all the questions, I just want to talk to the people making the brace (they are form a different hospital) and make sure the brace has the openings in the front back and ask if it's going to be over the shoulder. Thanks a lot!!! > >From: Kauffunger >infantile scoliosis treatment @groups. com >Sent: Wed, May 12, 2010 4:05:15 PM >Subject: Re: [infantile_scoliosi s] Brace for high curve? > > >, >I'm not a doc, but here are my thoughts on this. I would absolutly ask those questions of your ortho. Noelle's brace was made from a mold of her body. She was put under anesthesia and a cast was made and the brace was molded

from that. Her brace looks very much like her cast and because of how it was molded, customized specifically for her. You definately couldn't put her brace on someone else. I think the majority of braces are made this way. I hope this eases your mind a bit.... >- Noelle's mommy, 3 years old >Rochester NY >Casted 8 times for 1 1/2 years and in first brace! >reflux, mild plagiocephaly, mild torticollos, hypotonia, ligament laxity, suspected Ehler's Danlos III > > > > >>From: Portas >>Subject: [infantile_scoliosi s] Brace for high curve? >>infantile scoliosis treatment @groups. com >>Date: Wednesday, May 12, 2010, 6:02 PM >> >> >> >>Hi, >> >>My son had a 40 degrees curve initially (diagnosed in March last year), but it's a high curve. He has been in casts since August and some of

them have included neck support, with those we have had better correction (down to 10 degrees in cast). >> >>Because my son also needs to have PT (he is 21 months, walking holding one hand, but can't get up from the floor or sit down from standing) we are going to have a brace break for the summer. He is going to be molded next Friday before they put a cast on and then we will go into a brace (Yes, I'm scared, but we need to try to improve his balance/strength) . >> >>We were told they are probably make a TLSO for him. I'm worried about how they can make it high enough to get correction. >> >>Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I have no idea what I'm talking about here, so I'm sorry if this is a stupid question)? >> >>You all know we (parents) have to be on top of things, because nobody else will be. So I'm thinking I'm going to have to give the orthotics department

all those details and hopefully I can get some suggestions. >> >>Thank you! >> >> >> >> > >

Guest guest
Posted

I guess it is fitted to suit the childs curve, body shape, etc. They are all different I suppose. Joanmom to Hayden 339 degrees down from 62After 4 casts, now in a brace 23 hours/dayTreated at ish Rite Hospital Dallas, TX

From: <candice_welch85@...>"infantile scoliosis treatment " <infantile scoliosis treatment >Sent: Thu, May 13, 2010 10:15:25 AMSubject: Re: Brace for high curve?

Our TLSO does not have a cut out on the side. We have a small cit out where the rib humb is but they put and firm foam in the cut out. They did this to stop a sore from starting. Also it is a front close brace. mommy to Thaddeus Sent from my iPhone On May 13, 2010, at 5:28 AM, Joan Vallee wrote: , our TLSO Boston brace does not have the mushroom cutout like the Mehta cast does, it just has a huge opening on one side. Let me know if they do an opening in front.. Joan mom to Hayden 3 39 degrees down from 62 After 4 casts, now in a brace 23 hours/day Treated at ish Rite Hospital Dallas, TX From: Portas infantile scoliosis treatment @groups. com Sent: Wed, May 12, 2010 9:20:08 PM Subject: Re: [infantile_scoliosi s] Brace for high curve? Hi ... That's how they are going to do it. Next Friday we change the cast again and they are going to do the mold for the brace. That was supposed to happen at the last cast change (2

months ago) but it didn't (it was not arranged as expected). I will ask all the questions, I just want to talk to the people making the brace (they are form a different hospital) and make sure the brace has the openings in the front back and ask if it's going to be over the shoulder. Thanks a lot!!! > >From: Kauffunger >infantile scoliosis treatment @groups. com >Sent: Wed, May 12, 2010 4:05:15 PM >Subject: Re: [infantile_scoliosi s] Brace for high curve? > > >, >I'm not a doc, but here are my thoughts on this. I would absolutly ask those questions of your ortho. Noelle's brace was made from a mold of her body. She was put under anesthesia and a cast was made and the brace was molded from that. Her brace looks very much like her cast and because of how it was molded, customized specifically for her. You definately couldn't put her brace on someone else. I think the majority of braces are made this way. I hope

this eases your mind a bit.... >- Noelle's mommy, 3 years old >Rochester NY >Casted 8 times for 1 1/2 years and in first brace! >reflux, mild plagiocephaly, mild torticollos, hypotonia, ligament laxity, suspected Ehler's Danlos III > > > > >>From: Portas >>Subject: [infantile_scoliosi s] Brace for high curve? >>infantile scoliosis treatment @groups. com >>Date: Wednesday, May 12, 2010, 6:02 PM >> >> >> >>Hi, >> >>My son had a 40 degrees curve initially (diagnosed in March last year), but it's a high curve. He has been in casts since August and some of them have included neck support, with those we have had better correction (down to 10 degrees in cast). >> >>Because my son also needs to have PT (he is 21 months, walking holding one hand, but can't get up from the floor or sit down from standing) we

are going to have a brace break for the summer. He is going to be molded next Friday before they put a cast on and then we will go into a brace (Yes, I'm scared, but we need to try to improve his balance/strength) . >> >>We were told they are probably make a TLSO for him. I'm worried about how they can make it high enough to get correction. >> >>Has anybody seen a brace that goes so high? Can they "customize" a TLSO (I have no idea what I'm talking about here, so I'm sorry if this is a stupid question)? >> >>You all know we (parents) have to be on top of things, because nobody else will be. So I'm thinking I'm going to have to give the orthotics department all those details and hopefully I can get some suggestions. >> >>Thank you! >> >> >> >> > >

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...