Re: Testosterone Cyptionate dosage measurement question

May 6, 2006

Bill,

I would have your doctor explain it to them. Not sure if they will

take a patient's word for it.

Mark

May 6, 2006

Test Cyp is an oil suspension...100 mg.=72 mg.of actual test. So, 1 cc(1 ml.

will be 72 mg. of test).

Ron

Bill <trainman199@...> wrote:

I inject I/M every 7 days Test Cyptliquidsolution , The solution in

vial is 200 MG per ML

I know i am getting 60 MG of the liquid based on the syringe marks. I

use a 3 ML syringe (big) so each mark on the syringe is 20 units The

one half ML mark on the syringe 5 lines up would give me a 100 MG

I draw in less that-the 3rd line up to get 60 MG

I am wondering how many c.c s of this liquid i am getting??

or should the question be how many ML of solution am i taking?

I am going into the hospital for surgery and i want to tell them i need

my weekly shot of My 200 mG Ml solution .Syringe sizes vary so do i

tell them how many c.c.s or M.L S of the dose strength liquid i need

I realize thee are other dose strengths of Test Cypt solution

Bill

May 6, 2006

If your trying to give your self a 60 mg shot of 200mg/ml T then you need a .3ml

amount in your syringe. Like you said the half mark is .5 mls or a 100 mg shot.

So when using 200 mgs/ml T you /by 2 to get the ml dose. So one ml = 200 mgs.

1/2 a ml = 100 mgs and 1/4 a ml = 50 mgs. Hope this helps best to tell them

what mg shot you need and let them worry about how to do it. Most Dr.'s

office's and Hospital have 100 mgs/ml T.

Phil

Bill <trainman199@...> wrote: I inject I/M every 7 days Test

Cyptliquidsolution , The solution in

vial is 200 MG per ML

I know i am getting 60 MG of the liquid based on the syringe marks. I

use a 3 ML syringe (big) so each mark on the syringe is 20 units The

one half ML mark on the syringe 5 lines up would give me a 100 MG

I draw in less that-the 3rd line up to get 60 MG

I am wondering how many c.c s of this liquid i am getting??

or should the question be how many ML of solution am i taking?

I am going into the hospital for surgery and i want to tell them i need

my weekly shot of My 200 mG Ml solution .Syringe sizes vary so do i

tell them how many c.c.s or M.L S of the dose strength liquid i need

I realize thee are other dose strengths of Test Cypt solution

Bill

May 6, 2006

Bill?

Nurses study extremely hard to make sure they know how to convert

ML's to MG's and that into CC's on a syringe...in fact, I know from

personal experience that they are tested randomly throughout their

careers to make sure they are up to speed on ALL the conversion

tables that are needed for medications. Just be sure to let them

know how much " T " you need per week and let them handle the rest.

If you are full of doubt when they come to give you your injection

(s), ask them to explain it to you before they inject it. They are

proud people when it comes to knowing their conversions, they will

be happy to explain it to you, OK? Get well soon! I hope it isn't

something extremely serious.

Wayne

> I inject I/M every 7 days Test Cyptliquidsolution , The solution

in

> vial is 200 MG per ML

>

> I know i am getting 60 MG of the liquid based on the syringe

marks. I

> use a 3 ML syringe (big) so each mark on the syringe is 20 units

The

> one half ML mark on the syringe 5 lines up would give me a 100 MG

> I draw in less that-the 3rd line up to get 60 MG

>

> I am wondering how many c.c s of this liquid i am getting??

> or should the question be how many ML of solution am i taking?

>

> I am going into the hospital for surgery and i want to tell them i

need

> my weekly shot of My 200 mG Ml solution .Syringe sizes vary so do

i

> tell them how many c.c.s or M.L S of the dose strength liquid i

need

>

> I realize thee are other dose strengths of Test Cypt solution

> Bill

>

May 6, 2006

How do you know how many CC's to take out of a 200 MG

vial of T?

--- Wayne Birdie <wayne_in_hawaii27@...> wrote:

> Bill?

>

> Nurses study extremely hard to make sure they know

> how to convert

> ML's to MG's and that into CC's on a syringe...in

> fact, I know from

> personal experience that they are tested randomly

> throughout their

> careers to make sure they are up to speed on ALL the

> conversion

> tables that are needed for medications. Just be sure

> to let them

> know how much " T " you need per week and let them

> handle the rest.

> If you are full of doubt when they come to give you

> your injection

> (s), ask them to explain it to you before they

> inject it. They are

> proud people when it comes to knowing their

> conversions, they will

> be happy to explain it to you, OK? Get well soon! I

> hope it isn't

> something extremely serious.

> Wayne

>

> > I inject I/M every 7 days Test

> Cyptliquidsolution , The solution

> in

> > vial is 200 MG per ML

> >

> > I know i am getting 60 MG of the liquid based on

> the syringe

> marks. I

> > use a 3 ML syringe (big) so each mark on the

> syringe is 20 units

> The

> > one half ML mark on the syringe 5 lines up would

> give me a 100 MG

> > I draw in less that-the 3rd line up to get 60 MG

> >

> > I am wondering how many c.c s of this liquid i am

> getting??

> > or should the question be how many ML of solution

> am i taking?

> >

> > I am going into the hospital for surgery and i

> want to tell them i

> need

> > my weekly shot of My 200 mG Ml solution .Syringe

> sizes vary so do

> i

> > tell them how many c.c.s or M.L S of the dose

> strength liquid i

> need

> >

> > I realize thee are other dose strengths of Test

> Cypt solution

> > Bill

> >

May 10, 2006

I do NOT know.answer to your question I have confused my self and others saying

i get 60 MG .Fact is i do not know what i get in terms of T .I go by the ant of

liquid i inject and it is 60 on the markings i think any how it is 3rd line on a

3 ml syringe

I have a 3 ML syringe .I certainly do not need such a large capacity but i

have a box of 100 to use up.

Getting the right dose takes experminting and blood testing to get riight

levels of T

I draw into the syringe more than i need then to get out air . Then i slowly

push back into the bottle ontill i am at the 3rd mark up. each mmark is 20 units

of liquid. We had started a half MLmark on the syringe but the dose was to

much and worked down wards to the 3rd mark so that is i do not know how many

units of liquid but the blood tests show this keeps me mid range or better on

myT and i am doing fine on it. When we started at the half ml a had high T and

got a high red blood count to had to cut back. this has taken months and

patience working with Doctor to get right dose for me

I am going to hospital in a few weks for open heart surgery to fix or replace

myMitral Valve

I get a shot iM every 7 days

I cant take my syringes in with me. I use 200 MG ML solution So i was wanting

to tell them to inject me every 7 days same solution but did not know the

unitsof liquid to say to use . I realize part of the liquid is the ester . as a

lay person i draw in liquid in a syringe . Right now the amt of liquid is at 3rd

mark on my 3ML syringe

I have bought a box of 1 ML syringes So now i wonder how much liquid to draw

into this small syringe to get same amt of liquid i get in 3 mL syringe at 3rd

mark

The small 1 ML syringe is marked starting at 20 and goes to 100 at the top

so i assume i draw in to 60 on the scale to get same amt of liquid i was getting

in the 3 ML syringe at the 3rd line ??

I was thinking that i should simply inject me with x units of the liquid and

be sure to use the 200 mG ML liquid if not that strength adjust acordingly

At the moment i do not understang how many mGs i get of T Really didnot caer

because i go by liquid amt and how i feel and blod test results

If i have to tell them how many mgs i get a week i need help to convert and

tell them . sorry to be so dense and inept with math ' I am a visual person

3rd line on the 3 ml syringe is my dose.when i use the new 1 ml syringe whqt

line on thtat 60??

Bill

ELLIOT BAKER <elliotbkr@...> wrote:

How do you know how many CC's to take out of a 200 MG

vial of T?

--- Wayne Birdie <wayne_in_hawaii27@...> wrote:

> Bill?

>

> Nurses study extremely hard to make sure they know

> how to convert

> ML's to MG's and that into CC's on a syringe...in

> fact, I know from

> personal experience that they are tested randomly

> throughout their

> careers to make sure they are up to speed on ALL the

> conversion

> tables that are needed for medications. Just be sure

> to let them

> know how much " T " you need per week and let them

> handle the rest.

> If you are full of doubt when they come to give you

> your injection

> (s), ask them to explain it to you before they

> inject it. They are

> proud people when it comes to knowing their

> conversions, they will

> be happy to explain it to you, OK? Get well soon! I

> hope it isn't

> something extremely serious.

> Wayne

>

> > I inject I/M every 7 days Test

> Cyptliquidsolution , The solution

> in

> > vial is 200 MG per ML

> >

> > I know i am getting 60 MG of the liquid based on

> the syringe

> marks. I

> > use a 3 ML syringe (big) so each mark on the

> syringe is 20 units

> The

> > one half ML mark on the syringe 5 lines up would

> give me a 100 MG

> > I draw in less that-the 3rd line up to get 60 MG

> >

> > I am wondering how many c.c s of this liquid i am

> getting??

> > or should the question be how many ML of solution

> am i taking?

> >

> > I am going into the hospital for surgery and i

> want to tell them i

> need

> > my weekly shot of My 200 mG Ml solution .Syringe

> sizes vary so do

> i

> > tell them how many c.c.s or M.L S of the dose

> strength liquid i

> need

> >

> > I realize thee are other dose strengths of Test

> Cypt solution

> > Bill

> >

May 10, 2006

On the 3 ML syringe i draw to 3rd tick mark to inject liquid so how many MGS am

i getting of T? How many units of liquid am i getting Syringe mucch to big i

bought some 1 ML syringes they are Marked from 20 up to 100 with litle tic marks

in between . got to figure out how far to fil it up Bill

Bill

Kramer <bb1fit@...> wrote:

Test Cyp is an oil suspension...100 mg.=72 mg.of actual test. So, 1 cc(1 ml.

will be 72 mg. of test).

Ron

Bill <trainman199@...> wrote:

I inject I/M every 7 days Test Cyptliquidsolution , The solution in

vial is 200 MG per ML

I know i am getting 60 MG of the liquid based on the syringe marks. I

use a 3 ML syringe (big) so each mark on the syringe is 20 units The

one half ML mark on the syringe 5 lines up would give me a 100 MG

I draw in less that-the 3rd line up to get 60 MG

I am wondering how many c.c s of this liquid i am getting??

or should the question be how many ML of solution am i taking?

I am going into the hospital for surgery and i want to tell them i need

my weekly shot of My 200 mG Ml solution .Syringe sizes vary so do i

tell them how many c.c.s or M.L S of the dose strength liquid i need

I realize thee are other dose strengths of Test Cypt solution

Bill

May 10, 2006

On my 3 ML syringe we started at the one half mark which is 5 ticks up .It was

too much of a dose for me and after months of experminting and testing we are at

3rd tic mark up how ever much that is it seems to be to be the right dose for me

.. So how many mgs am i getting using the 200 MG ML solution and i will tell them

i get x Mgs a week I.M

Since a light stroke i cant see mto deal with conversions.nunbers concentrate

etc Visually i see where to draw on my 3 ml syringe-2rd tic up .The 5th tick up

it marked one half mL . i will later go to my 1 ML syringes i have recently

purchased because the 3 ml syringes are not needed -to big- barely take in any

liquid to get to 3rd tick mark Bill

philip georgian <pmgamer18@...> wrote:

If your trying to give your self a 60 mg shot of 200mg/ml T then you need a

..3ml amount in your syringe. Like you said the half mark is .5 mls or a 100 mg

shot. So when using 200 mgs/ml T you /by 2 to get the ml dose. So one ml = 200

mgs. 1/2 a ml = 100 mgs and 1/4 a ml = 50 mgs. Hope this helps best to tell

them what mg shot you need and let them worry about how to do it. Most Dr.'s

office's and Hospital have 100 mgs/ml T.

Phil

Bill <trainman199@...> wrote: I inject I/M every 7 days Test

Cyptliquidsolution , The solution in

vial is 200 MG per ML

I know i am getting 60 MG of the liquid based on the syringe marks. I

use a 3 ML syringe (big) so each mark on the syringe is 20 units The

one half ML mark on the syringe 5 lines up would give me a 100 MG

I draw in less that-the 3rd line up to get 60 MG

I am wondering how many c.c s of this liquid i am getting??

or should the question be how many ML of solution am i taking?

I am going into the hospital for surgery and i want to tell them i need

my weekly shot of My 200 mG Ml solution .Syringe sizes vary so do i

tell them how many c.c.s or M.L S of the dose strength liquid i need

I realize thee are other dose strengths of Test Cypt solution

Bill

May 10, 2006

Thanks. I am dense about this. I do NOT know how much T i am getting. I just

know to draw to 3rd tick mark on 3 ML the one half mL mark is 5 tics up so i get

less than a half mL of the lqiuid

i AM TO HAVe OPEN HEART SURGERY TO REPAIR OR REPLACE MY MITRAL VALVE. THANK

U ALL FOR TRYING TO HELP. I AM RATTLED AND SINCE my LIGHT STROKE CANT SEEM TO

ABSORB THIS STUFF

Wayne Birdie <wayne_in_hawaii27@...> wrote: