Jump to content
RemedySpot.com

starting tommorrow at home-MEALPLANNER ???

Rate this topic


Guest guest

Recommended Posts

I told you that I'm going to be buggin you and I am. Its been a year and

I'm forgetting things.

s ratio is 2:1 calories 1290, protein 26g

Should I plug that total in to the meal planner or plug in less (990 cals)

and do snacks separately. He is going to get 3 meals at 330 each and 3 snacks

for the rest. How would you plug those into the mealplanner?

We are using the Stanford mealplanner.

Thanks

Link to comment
Share on other sites

Hi ,

When I do that part, I have found it easier to work out percentage wise the

protein amount based on what percentage of total cals the snack or meal is, and

then treat each meal as separate in the mealplanner.

Like for example, 330 cals is 25.6% of 1290, so 25.6% of his prt allowance is

6.66 gms.

I would enter that in the mealplanner as one meal over the whole day - 330

cals, 6.66 prt on a 2:1 ratio, and let it work the carb and fat out based on

that.

The other two 330 cal meals would be the same, leaving just a percentage

calculation from the total cal allowance of 1290 for the snacks to be done,

depending on whether they are all the same totals.

Does that make sense? Holler if you want me to help work the snack totals out.

PS - I wouldn't fast him if it were me I don't think, he might overshoot the

mark and get into trouble with excess ketosis, esp as he is one who seems to

make ketones fairly easily.

----- Original Message -----

From: lloydandleslie@...

I told you that I'm going to be buggin you and I am. Its been a year and

I'm forgetting things.

s ratio is 2:1 calories 1290, protein 26g

Should I plug that total in to the meal planner or plug in less (990 cals)

and do snacks separately. He is going to get 3 meals at 330 each and 3

snacks

for the rest. How would you plug those into the mealplanner?

We are using the Stanford mealplanner.

Thanks

Link to comment
Share on other sites

,

Thanks for your input. So you divide each meal out on the mealplanner and

put it in as 1 meal. I'll try that. When we started the diet before, our

dietician did not perfectly balance out the snacks only the ratio. I'm going

to

try to work on it. Its all coming back to me. It was kind of weird this am

with that scale on the counter. I put it in a different place this time.

Isnt that silly. I just hated that scale so much the last time but we've had

almost a year away from it and I'm kinda happy to see it hoping that it will

give some relief.

How is s wean going?? Is he sz free? I hope you are able to rid the

depakote if you want to. I have to tell you that since we added it back 3

mos ago for his moods have gotten soooooo much better that I wonder

if the depakote helps his moods and behaviors. Its does make him a bit

slower and also more uncoordinated. He is getting 125 in am and 250 at pm.

Glad to see you are around. You are much better at the calculations in math

than I am. I had to take calculus and finite math twice each in college to

get the grades. Math is not my forte'.

Take care

Link to comment
Share on other sites

,

I have done it this way, too. It is more precise because the

calories match exactly. The other thing I have done, which I think

is easier, but you may not, is to enter a total of 4 meals per day

into the planner. Then, a snack is 1/3 of a meal--# of your " meals "

are meals and the 4th " meal " is actually the three snacks added

together. We went back and forth between 3 meals/3 snacks and

3meals/2 snacks using the same overall diet Rx. This worked like a

champ because I didn't have to change meals and snacks in the

planner. If you were to do it that way using the numbers you posted,

each snack would have 107 cals. instead of 100. The cals in meals

would be decreased to 323 cals. The total daily calories would still

be 1290. I wouldn't think that 7 cals either way would make a

difference in a meal vs. snack. The way to make it perfectly precise

is what recommended with separate sheets for your meals and

snacks.

Good Luck!

Cammie

> Hi ,

> When I do that part, I have found it easier to work out

percentage wise the protein amount based on what percentage of total

cals the snack or meal is, and then treat each meal as separate in

the mealplanner.

> Like for example, 330 cals is 25.6% of 1290, so 25.6% of his prt

allowance is 6.66 gms.

> I would enter that in the mealplanner as one meal over the whole

day - 330 cals, 6.66 prt on a 2:1 ratio, and let it work the carb and

fat out based on that.

> The other two 330 cal meals would be the same, leaving just a

percentage calculation from the total cal allowance of 1290 for the

snacks to be done, depending on whether they are all the same totals.

> Does that make sense? Holler if you want me to help work the

snack totals out.

>

>

> PS - I wouldn't fast him if it were me I don't think, he might

overshoot the mark and get into trouble with excess ketosis, esp as

he is one who seems to make ketones fairly easily.

> ----- Original Message -----

> From: lloydandleslie@a...

>

>

> I told you that I'm going to be buggin you and I am. Its been

a year and

> I'm forgetting things.

>

> s ratio is 2:1 calories 1290, protein 26g

> Should I plug that total in to the meal planner or plug in less

(990 cals)

> and do snacks separately. He is going to get 3 meals at 330

each and 3 snacks

> for the rest. How would you plug those into the mealplanner?

>

> We are using the Stanford mealplanner.

>

> Thanks

>

>

>

>

>

>

>

>

Link to comment
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...