Re: Best Bartonella frequency for EMEM3 machine?

[Guest guest]

832 has worked great for bartonella for me. I had to work up to 2 sessions a day. It works best for me if I treat it in the morning and then about 6 hours later. I tried just splitting up the day evenly and treating every 12 hours but that didn't work for me. It multiplies very quickly. If I give it an inch, it takes a mile. Just be sure your die off symptoms are gone before doing another session. Otherwise, you could end up in a really not fun place.Hope this helps!KaraSubject: Best Bartonella frequency for EMEM3 machine?To: Lyme_and_Rife Date:

Monday, July 12, 2010, 6:26 PMHello Everyone,I am new to this group and new to the rife technology too. I have been so sick, that I have borrowed an EMEM3 Dan T machine, and was hoping to try and get this stinking bartonella to back down a bit. First of all, what is the best website for the frequencies, and what is the best one for bartonella?I am too sick to write much right now, but will keep you all updated if you'd like, of my progress. I so very much am grateful that there is a group like this who care about each other, and can truly help each other. I look forward to healing with you!Shauna H

[Guest guest]

Hi Shauna,  I have a doug coil and am using 832 for Bart...I am not sure if it is the same for the EMEM3, i know there are people here who have that machine that would be able to confirm :-)Welcome!Whitney

 

Hello Everyone,

I am new to this group and new to the rife technology too. I have been so sick, that I have borrowed an EMEM3 Dan T machine, and was hoping to try and get this stinking bartonella to back down a bit.

First of all, what is the best website for the frequencies, and what is the best one for bartonella?

I am too sick to write much right now, but will keep you all updated if you'd like, of my progress. I so very much am grateful that there is a group like this who care about each other, and can truly help each other. I look forward to healing with you!

Shauna H

-- Whitney Schmucker

[Guest guest]

Thank you so much for getting back to me so quickly. How long do you think I should sit in front of it? 15secs?

Is there a "best" frequency website, where I could find other frequencies? This is my first time, and am just a bit nervous, yet excited about it.

Shauna H

From: homesbyshauna <homesbyshauna@ yahoo.com>Subject: Best Bartonella frequency for EMEM3 machine?To: Lyme_and_Rife@ yahoogroups. comDate: Monday, July 12, 2010, 6:26 PM

Hello Everyone,I am new to this group and new to the rife technology too. I have been so sick, that I have borrowed an EMEM3 Dan T machine, and was hoping to try and get this stinking bartonella to back down a bit. First of all, what is the best website for the frequencies, and what is the best one for bartonella?I am too sick to write much right now, but will keep you all updated if you'd like, of my progress. I so very much am grateful that there is a group like this who care about each other, and can truly help each other. I look forward to healing with you!Shauna H

[Guest guest]

I just started over the weekend, and did 15 seconds and didnt get a herx, so I waited 24 hours and moved up to 30 seconds. I was told by Stollar to go every other day, but I guess if you aren't herxing it wouldnt hurt to do every day. He said you want to eventually get up to about 5 minutes.

Whitney

 

Thank you so much for getting back to me so quickly. How long do you think I should sit in front of it? 15secs?

 

Is there a " best " frequency website, where I could find other frequencies? This is my first time, and am just a bit nervous, yet excited about it.

Shauna H

 

From: homesbyshauna <homesbyshauna@ yahoo.com>Subject: Best Bartonella frequency for EMEM3 machine?

To: Lyme_and_Rife@ yahoogroups. comDate: Monday, July 12, 2010, 6:26 PM

Hello Everyone,I am new to this group and new to the rife technology too. I have been so sick, that I have borrowed an EMEM3 Dan T machine, and was hoping to try and get this stinking bartonella to back down a bit.

First of all, what is the best website for the frequencies, and what is the best one for bartonella?I am too sick to write much right now, but will keep you all updated if you'd like, of my progress. I so very much am grateful that there is a group like this who care about each other, and can truly help each other. I look forward to healing with you!

Shauna H

-- Whitney Schmucker

[Guest guest]

Shauna,I'd start with just a few seconds -- like 5. Wait 24 hours. You may have delayed die off symptoms -- like hours and hours later. If nothing happens or have slight symptoms that clear fairly quick, then go up a bit more, like to 15 seconds. If you have a few hours of symptoms and then they clear out, then just increase to like 8 or 10 seconds.It is always better to "under-do" than "over-do" and end up in a herx from hell. My bart herxes ranged from 12 hours all the way down to an hour. Just be sure your die off symptoms have cleared before doing another session.Bartonella reproduces rapidly so I was told to work up to doing a session 2-3 times a day. Twice a day, close together, as I mentioned before, works better for me than 2 or 3 sessions spaced out evenly during the day. As long as I keep up with the sessions every day,

I not herx to them any more. But if I skip a day, I herx. So obviously, bart is still at work. I don't notice any bart symptoms any more. If there are any, they are minimal.There's no "best frequency" website that I know of. You can get to the CAFL here: http://www.electroherbalism.com/Bioelectronics/FrequenciesandAnecdotes/CAFL.htmThis group is the best resource I've found for frequencies. There is a main frequency for each infection. So far, each one I've tried has hit my infections right on. So far I've worked on babesia, bart, ehrlichia and now lyme.Kara

[Guest guest]

Oh Kara, thank you so much for all the great info! I just tried what you said, and I felt an immediate herx.....wow. I am so excited to get this under control. I hate the head trip symptoms it brings with it.

Do you sweat with bart symptoms? What are your bart symptoms?

Shauna H.

Subject: Re: Best Bartonella frequency for EMEM3 machine?To: Lyme_and_Rife Date: Monday, July 12, 2010, 12:18 PM

Shauna,I'd start with just a few seconds -- like 5. Wait 24 hours. You may have delayed die off symptoms -- like hours and hours later. If nothing happens or have slight symptoms that clear fairly quick, then go up a bit more, like to 15 seconds. If you have a few hours of symptoms and then they clear out, then just increase to like 8 or 10 seconds.It is always better to "under-do" than "over-do" and end up in a herx from hell. My bart herxes ranged from 12 hours all the way down to an hour. Just be sure your die off symptoms have cleared before doing another session.Bartonella reproduces rapidly so I was told to work up to doing a session 2-3 times a day. Twice a day, close together, as I mentioned before, works better for me than 2 or 3 sessions spaced out evenly during the day. As long as I keep up with the sessions every day, I not herx to them any more. But if I skip a day, I herx. So obviously,

bart is still at work. I don't notice any bart symptoms any more. If there are any, they are minimal.There's no "best frequency" website that I know of. You can get to the CAFL here: http://www.electroh erbalism. com/Bioelectroni cs/Frequenciesan dAnecdotes/ CAFL.htmThis group is the best resource I've found for frequencies. There is a main frequency for each infection. So far, each one I've tried has hit my infections right on. So far I've worked on babesia, bart, ehrlichia and now lyme.Kara

[Guest guest]

Shauna,My bart specific die off symptoms were anxiety and a tight, tingly, pressure spot right in the center back of my head. Other symptoms were sore throat (but I get that with every infection I kill), achy muscles, slight fever, itchy eyes, hot eyes. Liver pain really kicked up 3-4 weeks after starting to kill bartonella. My doc did blood tests and found my iron was extremely high -- way off the scale. He said it was from die off. It kills the red blood cells and my liver just couldn't keep up with recycling the iron fast enough. Everything else checked out OK. Pain gradually decreased and resolved totally in 4-6 weeks.General bart symtpoms I have experienced:**A-N-X-I-E-T-Y**coughfever, especially in the morningvery sore soles of feet in AMelevated liver enzymes in the pastback of my head hurt and was tingly (in

the center)weight lossThese symptoms all disappeared after I got the bart under control. I have all the major co-infections and several other odd-ball ones so I experience a lot of symptom cross-over and overlap. For me, it's taken time to unravel things, so to speak. I still have sweats every so often but there's no pattern. Not sure if killing bart had any effect on those for me.That about does it, I think. Good luck and hang in there. Little steps will get you there! And stick with it because my symptoms did not decrease until I got up to twice a day and had maintained there for at least a month. So I guess in all, it was probably 3 months before I noticed BIG changes -- like the disappearance of the anxiety. The AM fever and sore feet went away first and early on for me.Have a nice afternoon,Kara

[Guest guest]

Hi Whitney,

Please keep in mind, sometimes herxes are delayed by a day or two... It is best

not to start

a new session until a herx has cleared...

Jim

> >

> >

> > From: homesbyshauna <homesbyshauna@ yahoo.com>

> > Subject: Best Bartonella frequency for EMEM3 machine?

> > To: Lyme_and_Rife@ yahoogroups. com

> > Date: Monday, July 12, 2010, 6:26 PM

> >

> >

> > Hello Everyone,

> >

> > I am new to this group and new to the rife technology too. I have been so

> > sick, that I have borrowed an EMEM3 Dan T machine, and was hoping to try and

> > get this stinking bartonella to back down a bit.

> >

> > First of all, what is the best website for the frequencies, and what is the

> > best one for bartonella?

> >

> > I am too sick to write much right now, but will keep you all updated if

> > you'd like, of my progress. I so very much am grateful that there is a group

> > like this who care about each other, and can truly help each other. I look

> > forward to healing with you!

> >

> > Shauna H

> >

> >

> >

> >

>

>

>

> --

> Whitney Schmucker

>

[Guest guest]

To all newbie coilers,My experience is that diseases that replicate faster bring on faster herxes, diseases that replicate slower bring on slower herxes.Example:For me when I coil for Babesia that herx hits me 15 hours later and is gone in about 3-5 hours. 

For Lyme, my herx doesn't hit for 36 hours (or more) and lasts a good 12 hours.I've pushed myself (stupidly) and have had herxes last 3 days - no fun.If you really don't know how you'll respond to a frequency, I'd skip a day of coiling before increases length.  It's hard to do when you are starting, but just imagine if a Lyme herx takes 3-4 days to hit, and you've not only coiled 3 days in a row, but have increased your time each day........you could be in a world of hurt.

Plus it's nice to know when and how long your herxes are.  That way you can almost plan for them.   If they are short _ like my babs herx - I can plan it to hit while I'm sleeping.  My Lyme herxes I plan for weekends, or days when it doesn't matter.

L

[Guest guest]

Aaah what wise folks we have to hold us under their wing for a while. Thank you ! I think I will wait a day or two, to see what the bart. frequency brings.

Also, I'll check out the mms sites too. So grateful for you guys!

Shauna Hutchins

Subject: Re: Re: Best Bartonella frequency for EMEM3 machine?To: Lyme_and_Rife Date: Monday, July 12, 2010, 8:37 PM

To all newbie coilers,My experience is that diseases that replicate faster bring on faster herxes, diseases that replicate slower bring on slower herxes.Example:For me when I coil for Babesia that herx hits me 15 hours later and is gone in about 3-5 hours. For Lyme, my herx doesn't hit for 36 hours (or more) and lasts a good 12 hours.I've pushed myself (stupidly) and have had herxes last 3 days - no fun.If you really don't know how you'll respond to a frequency, I'd skip a day of coiling before increases length. It's hard to do when you are starting, but just imagine if a Lyme herx takes 3-4 days to hit, and you've not only coiled 3 days in a row, but have increased your time each day........you could be in a world of hurt.Plus it's nice to know when and how long your herxes are. That way you can almost plan for them. If they are short _ like my babs

herx - I can plan it to hit while I'm sleeping. My Lyme herxes I plan for weekends, or days when it doesn't matter.L

[Guest guest]

thank you for your thinking it help me think of anticipating aslo th eherx : how long it will be I will observ it . providing there is a releive somewhere that may indicate the end of a herx.

Marie

To: Lyme_and_Rife Sent: Tue, July 13, 2010 7:34:35 AMSubject: Re: Re: Best Bartonella frequency for EMEM3 machine?

Aaah what wise folks we have to hold us under their wing for a while. Thank you ! I think I will wait a day or two, to see what the bart. frequency brings.

Also, I'll check out the mms sites too. So grateful for you guys!

Shauna Hutchins

From: H <40dayjourney@ gmail.com>Subject: Re: Re: Best Bartonella frequency for EMEM3 machine?To: Lyme_and_Rife@ yahoogroups. comDate: Monday, July 12, 2010, 8:37 PM

To all newbie coilers,My experience is that diseases that replicate faster bring on faster herxes, diseases that replicate slower bring on slower herxes.Example:For me when I coil for Babesia that herx hits me 15 hours later and is gone in about 3-5 hours. For Lyme, my herx doesn't hit for 36 hours (or more) and lasts a good 12 hours.I've pushed myself (stupidly) and have had herxes last 3 days - no fun.If you really don't know how you'll respond to a frequency, I'd skip a day of coiling before increases length. It's hard to do when you are starting, but just imagine if a Lyme herx takes 3-4 days to hit, and you've not only coiled 3 days in a row, but have increased your time each day........you could be in a world of hurt.Plus it's nice to know when and how long your herxes are. That way you can almost plan for them. If they are short _ like my babs

herx - I can plan it to hit while I'm sleeping. My Lyme herxes I plan for weekends, or days when it doesn't matter.L

[Guest guest]

For fever,

I make it desapears like a breath in 5 to 10 minutes with the life threatening protocol MMS the skin applying with dmso

DO NOT DRINK IT IS FOR THE SKIN ONLY

in a glass small container

10 drops mms

50 drops lemon juice

agitate a few second to mix

a few drops of dmso diluted a 30 % dilution is far enought

agitate a few second to mix Put it on your skin evrywhere immediatly

read jimhumble.biz for extended explanations please first

Marie

To: Lyme_and_Rife Sent: Mon, July 12, 2010 11:36:03 PMSubject: Re: Best Bartonella frequency for EMEM3 machine?

Shauna,My bart specific die off symptoms were anxiety and a tight, tingly, pressure spot right in the center back of my head. Other symptoms were sore throat (but I get that with every infection I kill), achy muscles, slight fever, itchy eyes, hot eyes. Liver pain really kicked up 3-4 weeks after starting to kill bartonella. My doc did blood tests and found my iron was extremely high -- way off the scale. He said it was from die off. It kills the red blood cells and my liver just couldn't keep up with recycling the iron fast enough. Everything else checked out OK. Pain gradually decreased and resolved totally in 4-6 weeks.General bart symtpoms I have experienced:**A-N-X-I-E- T-Y**coughfever, especially in the morningvery sore soles of feet in AMelevated liver enzymes in the pastback of my head hurt and was tingly (in the center)weight lossThese symptoms all disappeared after I got the

bart under control. I have all the major co-infections and several other odd-ball ones so I experience a lot of symptom cross-over and overlap. For me, it's taken time to unravel things, so to speak. I still have sweats every so often but there's no pattern. Not sure if killing bart had any effect on those for me.That about does it, I think. Good luck and hang in there. Little steps will get you there! And stick with it because my symptoms did not decrease until I got up to twice a day and had maintained there for at least a month. So I guess in all, it was probably 3 months before I noticed BIG changes -- like the disappearance of the anxiety. The AM fever and sore feet went away first and early on for me.Have a nice afternoon,Kara