Guest guest Posted July 31, 2011 Report Share Posted July 31, 2011 Hi n,I have used as high as 2110 on my machine. I can't remember how high a coil will go. I'm thinking 2,500, but really this number needs to be confirmed. Anything over 2,000 the " -20db " button needs to be toggled (off - I think). The coil will heat up fast at the frequencies. Be careful at high frequencies. When I coiled 2110, my goal was 30 seconds the first time. I felt funny after 8 seconds, and by 20-25 seconds my large muscles were spasming. I stopped. Within a few hours I was hit with the HFH (herx from hell). It was unbelievable bad. The worse I've ever had. My warning isn't so much the frequency, but if you ever feel funny while coiling -STOP. Of note: I waited several days for the herx to clear, and it was probably a week or more when I tried the frequency again for 15 seconds. Not much of a herx and with in days I wasn't herxing at all - even with coiling for several minutes. It's been way over a year since I did it, so I'd have to look through my notes. Best, Hi, I noticed on the CAFL list that frequency 2900 gets a lot of mention for treating ALS. It's listed for other things too, such as mycoplasma. Has anybody here Rifed at this frequency? If so, was that using a coil machine or a contact type machine? What sort of results did you get - improvements, herxing, etc? Thanks, -n Quote Link to comment Share on other sites More sharing options...
Guest guest Posted July 31, 2011 Report Share Posted July 31, 2011 Thanks ,Yes there are definitely limitations on coiling at 2900Hz - it requires a different coil. But I was more interested in people's treatment results of Rifing at 2900Hz.Thanks,-n Hi, I noticed on the CAFL list that frequency 2900 gets a lot of mention for treating ALS. It's listed for other things too, such as mycoplasma. Has anybody here Rifed at this frequency? If so, was that using a coil machine or a contact type machine? What sort of results did you get - improvements, herxing, etc? Thanks, -n Quote Link to comment Share on other sites More sharing options...
Guest guest Posted July 31, 2011 Report Share Posted July 31, 2011 Hi n, I have run this frequency in a group of Mycoplasma frequencies. I used a GB 4000 which isn't the strongest Rife application. I didn't herx very much from any of the frequencies I ran. However, I never tried running 2900 for 30 or 40 minutes which might make a difference. If it were to be run on the coil, you would need a smaller custom coil made for running higher frequencies since the coil machine does best under 1000 hz. You can change the -db switch on the coil to run higher frequencies up to around 1500, but it overheats pretty quickly. > > Hi, > > I noticed on the CAFL list that frequency 2900 gets a lot of mention for > treating ALS. It's listed for other things too, such as mycoplasma. > > Has anybody here Rifed at this frequency? If so, was that using a coil > machine or a contact type machine? What sort of results did you get - > improvements, herxing, etc? > > Thanks, > -n > Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.