Jump to content
RemedySpot.com

Re: bacteria testing for MORs...

Rate this topic


Recommended Posts

Guest guest
Posted

Hello Beamray,

In some of the lab note papers Dr. Rife mentions that they would sweep the

frequency for the last 30 seconds or so. Also, in the Beam Ray trial papers it

is mentioned that a sweep capability was put in some of the instruments. I

believe that this is for the reason that Jim Bare points out in his post.

Accuracy was a real problem.

Jeff

> > > > > >

> > > > > > > Part of the problem I belive is that

> > > > > > > most people are NOT trying to duplicate what Rife did, they

> > > > > > > are duplicating what Crane did.

> > > > > > > Perhaps we will never know what Rife really did, but we now

> > > > > > > know

> > > > > > > about the Gruner circuit and also something about a actual

> > > > > > > Beamray machine. The Beamray machines worked,therefore more

> > > > > > > effort should be directed towards that technology,which

> > > > > > > boils down to heterodyning.

> > > > > > > Beamray

> > > > > >

> > > > > >

> > > > > > It appears that there is still some misunderstanding regarding the

work that was done on the so-called Gruner circuit. As drawn, the circuit is

unworkable. There are no frequency tuning components, either on the RF

oscillator or the audio section. This may be due to it being incompletely or

inadequately drawn. Jim s' ingenious interpretation of the schematic was

in the attempt to not only make it a workable circuit, but also to be able to

produce the original Rife frequencies. We don't _know_ that this is actually

how the original machines worked. All we know is that Jim's solution is

workable in the real world. It has not yet been demonstrated to produce the

Rife effect, so it is premature to conclude that it " boils down to

heterodyning " .

> > > > > >

> > > > > > Regards,

> > > > > >

> > > > > >

> > > > > >

> > > > > >

> > > > >

> > > >

> > >

> >

>

Guest guest
Posted

Hi Jim:You are probably correct, I was just a thought, that occurred to me.

Thanks

Beamray/Mike

>

> Mike,

>

> Perhaps there is another reason that there was a sweep switch

> ? Frequency accuracy was critical, but with aging of the components,

> variations in AC line voltage, and so on, frequencies could drift

> some from the original calibrations. A sweep could easily accommodate

> for induced inaccuracies.

>

> Jim Bare

>

>

>

> >Another thought on the Beamray instrument with the sweep switch.

> >Could it not be possible that Hoyland used the sweep function in his

> >efforts to hide the frequencies.

>

Guest guest
Posted

Just want to stick my head in here and thank all the experts for taking the

time to share with the public their knowledge and wisdom.

It is simply staggering work you guys are doing and you need to be all

congratulated.

Thank you,

Ken Uzzell

Re: bacteria testing for MORs...

>I can make a few comments. All deductions on the heterodyning came from

>making the Gruner Schematic functional as pointed out. This was a

>logical deduction that Jim s came to after looking at that schematic.

>Jim and I talked and I told him that I could test his deduction that the

>Gruner Beam Ray instrument was a heterodyning instrument first by

>connecting an AZ-58 and an Aubrey Scoon instrument together. This test was

>done using a spectrum analyzer which showed that all of Dr. Rife's

>frequencies could easily be produced through heterodyning. Since all we

>have is this schematic and no actual Beam Ray instrument then this is the

>best that we can do. Do I believe that this is the way that the Gruner

>machine really worked? Yes, but only having an original machine will prove

>it.

>

>

> We do have some photos of Beam Ray machines that strongly indicate that

> Jim 's deduction is correct. Dr. Couche sold one of his Beam Ray

> instruments to Dr. Tully and we have a photo of it. The dial locations on

> Dr. Couche's machine matches the machine found in the May 1938 newspaper

> photo of Dr. Rife and Philip Hoyland. That photo shows an actual Beam Ray

> machine. Both of these photos show that there were no band switches on

> either of these machines which show they were not audio frequency

> machines. They both only had one dial and could produce all of the M.O.Rs.

> Heterodyning is the only way that I know of that could have made them

> work. One oscillator would have been fixed and the other would have been

> variable. This is the reason for only one dial and no band switches. These

> photos and what I have mentioned above is the reason that Jim 's

> deduction of the Gruner schematic makes the most sense. It works in the

> real world because both of us have built it. Those who read my paper will

> just have to make up their own minds if they think we are correct.

>

>

> All of this is important, but, I think the most important discovery made

> was the gating circuit. This circuit's output of a damped wave audio

> frequency minus the ring oscillations matches the output of the Rife Ray

> #4 scope tracings shown in the Rife Lab film. This is compelling evidence

> that gating is necessary in order to produce the Rife effect. From the

> Rife Ray #4 documents we know that it had two oscillators that could be

> set on any specific frequency they desired to use. Heterodyning was

> produced by this machine as a by-product when they output two frequencies

> at the same time but heterodyning was not used to produce the M.O.Rs. The

> proof of this is the fact that the oscillators were tuned to the M.O.R.

> frequency that they wanted. It also had band switches that allowed them to

> pick the various frequency ranges. Because of these Rife Ray #4 documents,

> I think it would be better to build an instrument that will output the

> specific frequencies of the M.O.Rs and then test it to see what results

> are achieved.

>

>

> Over the past few weeks I have been working on an instrument that will

> allow me to set it on whatever M.O.R. I want to use without using

> heterodyning. This requires winding large tank coils in order to get the

> lower frequency ranges. I now have an instrument that will produce

> frequencies through a ray tube between 700,000 hertz to 365,000 hertz. I

> am going to wind an even larger coil so that I can get more power out of

> the tube in order to make it work a little better. The goal is to use it

> on some B-coli later this spring and see if it will produce the desired

> effect. This instrument is using the old vacuum tubes that were used in

> the old Rife equipment.

>

>

> Jeff

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...