Jump to content
RemedySpot.com

Re: barbell questions

Rate this topic


Recommended Posts

Guest guest
Posted

I grip a barbell the same as dumbells . I think you'd be with one, if you can use dumbells pain-free :)You can store the barbell separately from the weights if need be. I don't like taking the weight on and off though, so I don't do that. I actually have three barbells with different amount of weights, so I just grab instead of messing with plates.... I would check walmart.com you can get a set for very cheap like $20 or $30 for 55 pounds, I think. Don't quote me, but it's something like that....

I'm excited for you! Great job on the workout!Darcy

Okay, I did MIS (Cathe's Maximum Intensity Strength) this morning and absolutely loved it! Anyway, I'm seriously considering finding space for a barbell now but have a couple of questions.

1. This is most important... how tightly do you have to grip a barbell? I know with dumbbells you don't want to grip them super tightly (my fingers are usually really loose) but is that also true with barbells? My RA affects my fingers most with grip especially being affected most days. I cannot grip things tightly without dealing with a lot of pain especially when I release and later on, after whatever I'm doing is over too. (I cannot weed gardens by hand for example.) Would I be able to use a barbell safely and effectively?

2. Assuming the answer to #1 is yes, I'd be fine with one... how do you buy a barbell? Do you usually get plates with it (that is what they call the barbell weights isn't it?) or do you purchase those separately? What weights would you start with if you buy them separately? Also, is there a standard weight for the bar? If not, how do you choose the weight to get for that?

3. Can you store the bar and plates separately (to save space)?

4. Anything else I should know?

Thanks for the help!

Guest guest
Posted

Thanks for the help Darcy! Yes, I'm fine with using dumbbells. Picking them up is usually okay even (which would be the worst part for me) because I don't have to grip them tightly to get them up. Every once in a while it is a problem (and those are the days I probably shouldn't be working out at all)!

When you say $20 or $30 for 55 lbs, does that mean the bar and the plates?? I am totally clueless about buying something like this, although that sounds like a very reasonable amount of money.

Thanks!!

Re: barbell questions

I grip a barbell the same as dumbells . I think you'd be with one, if you can use dumbells pain-free :)You can store the barbell separately from the weights if need be. I don't like taking the weight on and off though, so I don't do that. I actually have three barbells with different amount of weights, so I just grab instead of messing with plates.... I would check walmart.com you can get a set for very cheap like $20 or $30 for 55 pounds, I think. Don't quote me, but it's something like that....I'm excited for you! Great job on the workout!Darcy

On Mon, Jul 28, 2008 at 9:45 PM, nancydewolf <nancydewolfsbcglobal (DOT) net> wrote:

Okay, I did MIS (Cathe's Maximum Intensity Strength) this morning and absolutely loved it! Anyway, I'm seriously considering finding space for a barbell now but have a couple of questions.

1. This is most important... how tightly do you have to grip a barbell? I know with dumbbells you don't want to grip them super tightly (my fingers are usually really loose) but is that also true with barbells? My RA affects my fingers most with grip especially being affected most days. I cannot grip things tightly without dealing with a lot of pain especially when I release and later on, after whatever I'm doing is over too. (I cannot weed gardens by hand for example.) Would I be able to use a barbell safely and effectively?

2. Assuming the answer to #1 is yes, I'd be fine with one... how do you buy a barbell? Do you usually get plates with it (that is what they call the barbell weights isn't it?) or do you purchase those separately? What weights would you start with if you buy them separately? Also, is there a standard weight for the bar? If not, how do you choose the weight to get for that?

3. Can you store the bar and plates separately (to save space)?

4. Anything else I should know?

Thanks for the help!

Guest guest
Posted

Yes, it is just $19.96 for the barbell and the weights... I have this same set, and it works fine :) I see it is out of stock online right now, but I'm sure they will be restocking soon...http://www.walmart.com/catalog/product.do?product_id=2171148

Darcy

Thanks for the help Darcy! Yes, I'm fine with using dumbbells. Picking them up is usually okay even (which would be the worst part for me) because I don't have to grip them tightly to get them up. Every once in a while it is a problem (and those are the days I probably shouldn't be working out at all)!

When you say $20 or $30 for 55 lbs, does that mean the bar and the plates?? I am totally clueless about buying something like this, although that sounds like a very reasonable amount of money.

Thanks!!

Re: barbell questions

I grip a barbell the same as dumbells . I think you'd be with one, if you can use dumbells pain-free :)You can store the barbell separately from the weights if need be. I don't like taking the weight on and off though, so I don't do that. I actually have three barbells with different amount of weights, so I just grab instead of messing with plates.... I would check walmart.com you can get a set for very cheap like $20 or $30 for 55 pounds, I think. Don't quote me, but it's something like that....I'm excited for you! Great job on the workout!Darcy

Okay, I did MIS (Cathe's Maximum Intensity Strength) this morning and absolutely loved it! Anyway, I'm seriously considering finding space for a barbell now but have a couple of questions.

1. This is most important... how tightly do you have to grip a barbell? I know with dumbbells you don't want to grip them super tightly (my fingers are usually really loose) but is that also true with barbells? My RA affects my fingers most with grip especially being affected most days. I cannot grip things tightly without dealing with a lot of pain especially when I release and later on, after whatever I'm doing is over too. (I cannot weed gardens by hand for example.) Would I be able to use a barbell safely and effectively?

2. Assuming the answer to #1 is yes, I'd be fine with one... how do you buy a barbell? Do you usually get plates with it (that is what they call the barbell weights isn't it?) or do you purchase those separately? What weights would you start with if you buy them separately? Also, is there a standard weight for the bar? If not, how do you choose the weight to get for that?

3. Can you store the bar and plates separately (to save space)?

4. Anything else I should know?

Thanks for the help!

Guest guest
Posted

Shoot, with that said, you can't ship that one to store for free. So, you would have to pay shipping on it, if you can't find it at a walmart store near you.Darcy

Yes, it is just $19.96 for the barbell and the weights... I have this same set, and it works fine :) I see it is out of stock online right now, but I'm sure they will be restocking soon...http://www.walmart.com/catalog/product.do?product_id=2171148

Darcy

Thanks for the help Darcy! Yes, I'm fine with using dumbbells. Picking them up is usually okay even (which would be the worst part for me) because I don't have to grip them tightly to get them up. Every once in a while it is a problem (and those are the days I probably shouldn't be working out at all)!

When you say $20 or $30 for 55 lbs, does that mean the bar and the plates?? I am totally clueless about buying something like this, although that sounds like a very reasonable amount of money.

Thanks!!

Re: barbell questions

I grip a barbell the same as dumbells . I think you'd be with one, if you can use dumbells pain-free :)You can store the barbell separately from the weights if need be. I don't like taking the weight on and off though, so I don't do that. I actually have three barbells with different amount of weights, so I just grab instead of messing with plates.... I would check walmart.com you can get a set for very cheap like $20 or $30 for 55 pounds, I think. Don't quote me, but it's something like that....I'm excited for you! Great job on the workout!Darcy

Okay, I did MIS (Cathe's Maximum Intensity Strength) this morning and absolutely loved it! Anyway, I'm seriously considering finding space for a barbell now but have a couple of questions.

1. This is most important... how tightly do you have to grip a barbell? I know with dumbbells you don't want to grip them super tightly (my fingers are usually really loose) but is that also true with barbells? My RA affects my fingers most with grip especially being affected most days. I cannot grip things tightly without dealing with a lot of pain especially when I release and later on, after whatever I'm doing is over too. (I cannot weed gardens by hand for example.) Would I be able to use a barbell safely and effectively?

2. Assuming the answer to #1 is yes, I'd be fine with one... how do you buy a barbell? Do you usually get plates with it (that is what they call the barbell weights isn't it?) or do you purchase those separately? What weights would you start with if you buy them separately? Also, is there a standard weight for the bar? If not, how do you choose the weight to get for that?

3. Can you store the bar and plates separately (to save space)?

4. Anything else I should know?

Thanks for the help!

Guest guest
Posted

,

You can buy a bar bell set that should come with a certain amount of plates with it. I bought my with 100 lb. My bar bell alone weighs 10 lb. so if I had 2 10 LB plates that makes me be using 30 lb. I use to forget to add in the weight of the bar bell so I was lifting more than I thought.

You can get a bar bell with plates for a pretty reasonable price. I think you can even get a nice set at Walmart. I bought mine at a sporting goods store marked down. I can't remember what I paid, but it was well worth it because I've got a lot of great use.

I'm not sure what you mean about the gripping of the bar bell. I usually always wear weight gloves which help me to get a better grip, but I just hold the bar bell like I'd hold a dumb bell.

~**~Get fantasy football with free live scoring. Sign up for FanHouse Fantasy Football today.

Guest guest
Posted

i got that barbell from on of my stores. at the time it was only $50 and had 100 lbs of plates. the only thing with that barbell is that is all you can put on it. if you have play it again sports they sell used bars and plates and usually have somebody to help you. be sure if you get a barbell a barbell pad is great when using it for squats and lunges. kassia

Guest guest
Posted

I had a really hard time finding a light barbell, most are

ridiculous, like 25 lbs. You want to look for an aerobic barbell set

because the bars are light, around 5 lbs. I had bought a 50lb plate

set on clearance at target last year, it is great, the ends are

encased in rubber and they are octagon shaped so they don't roll on

the floor or clink together on the bar. They have the handgrips so

you can use them in place of dumbells. Since I already had the

plates, I just bought the bar at this site:

http://www.fitness1st.com/Troy-Bars.html (towards bottom of page)

I went to play it again sports and got some quick release end caps,

couldn't find them anyplace else. With an aerobic bar, they are

usually smaller in diameter than a traditional barbell, so if you

decide to get quick release caps, you'll have to be carefull on size.

HTH!

>

> Okay, I did MIS (Cathe's Maximum Intensity Strength) this morning

and absolutely loved it! Anyway, I'm seriously considering finding

space for a barbell now but have a couple of questions.

>

> 1. This is most important... how tightly do you have to grip a

barbell? I know with dumbbells you don't want to grip them super

tightly (my fingers are usually really loose) but is that also true

with barbells? My RA affects my fingers most with grip especially

being affected most days. I cannot grip things tightly without

dealing with a lot of pain especially when I release and later on,

after whatever I'm doing is over too. (I cannot weed gardens by hand

for example.) Would I be able to use a barbell safely and effectively?

>

> 2. Assuming the answer to #1 is yes, I'd be fine with one... how do

you buy a barbell? Do you usually get plates with it (that is what

they call the barbell weights isn't it?) or do you purchase those

separately? What weights would you start with if you buy them

separately? Also, is there a standard weight for the bar? If not, how

do you choose the weight to get for that?

>

> 3. Can you store the bar and plates separately (to save space)?

>

> 4. Anything else I should know?

>

> Thanks for the help!

>

>

>

Guest guest
Posted

Great points. I have my wal-mart set with the 5lb bar, and then I have a 15lb bar as well. The 15lb bar is obviously made a lot better and could support a lot more weight, but i have no preference when using either barbell.

Darcy

I had a really hard time finding a light barbell, most are

ridiculous, like 25 lbs. You want to look for an aerobic barbell set

because the bars are light, around 5 lbs. I had bought a 50lb plate

set on clearance at target last year, it is great, the ends are

encased in rubber and they are octagon shaped so they don't roll on

the floor or clink together on the bar. They have the handgrips so

you can use them in place of dumbells. Since I already had the

plates, I just bought the bar at this site:

http://www.fitness1st.com/Troy-Bars.html (towards bottom of page)

I went to play it again sports and got some quick release end caps,

couldn't find them anyplace else. With an aerobic bar, they are

usually smaller in diameter than a traditional barbell, so if you

decide to get quick release caps, you'll have to be carefull on size.

HTH!

>

> Okay, I did MIS (Cathe's Maximum Intensity Strength) this morning

and absolutely loved it! Anyway, I'm seriously considering finding

space for a barbell now but have a couple of questions.

>

> 1. This is most important... how tightly do you have to grip a

barbell? I know with dumbbells you don't want to grip them super

tightly (my fingers are usually really loose) but is that also true

with barbells? My RA affects my fingers most with grip especially

being affected most days. I cannot grip things tightly without

dealing with a lot of pain especially when I release and later on,

after whatever I'm doing is over too. (I cannot weed gardens by hand

for example.) Would I be able to use a barbell safely and effectively?

>

> 2. Assuming the answer to #1 is yes, I'd be fine with one... how do

you buy a barbell? Do you usually get plates with it (that is what

they call the barbell weights isn't it?) or do you purchase those

separately? What weights would you start with if you buy them

separately? Also, is there a standard weight for the bar? If not, how

do you choose the weight to get for that?

>

> 3. Can you store the bar and plates separately (to save space)?

>

> 4. Anything else I should know?

>

> Thanks for the help!

>

>

>

Guest guest
Posted

I didn't think about Play it Again Sports. I will check there if I decide to go ahead and get one. Thanks!

Re: barbell questions

i got that barbell from on of my stores. at the time it was only $50 and had 100 lbs of plates. the only thing with that barbell is that is all you can put on it. if you have play it again sports they sell used bars and plates and usually have somebody to help you. be sure if you get a barbell a barbell pad is great when using it for squats and lunges. kassia

Guest guest
Posted

Thanks!

(with a Wal-Mart not too far away...)

Re: barbell questions

I grip a barbell the same as dumbells . I think you'd be with one, if you can use dumbells pain-free :)You can store the barbell separately from the weights if need be. I don't like taking the weight on and off though, so I don't do that. I actually have three barbells with different amount of weights, so I just grab instead of messing with plates.... I would check walmart.com you can get a set for very cheap like $20 or $30 for 55 pounds, I think. Don't quote me, but it's something like that....I'm excited for you! Great job on the workout!Darcy

On Mon, Jul 28, 2008 at 9:45 PM, nancydewolf <nancydewolfsbcglobal (DOT) net> wrote:

Okay, I did MIS (Cathe's Maximum Intensity Strength) this morning and absolutely loved it! Anyway, I'm seriously considering finding space for a barbell now but have a couple of questions.

1. This is most important... how tightly do you have to grip a barbell? I know with dumbbells you don't want to grip them super tightly (my fingers are usually really loose) but is that also true with barbells? My RA affects my fingers most with grip especially being affected most days. I cannot grip things tightly without dealing with a lot of pain especially when I release and later on, after whatever I'm doing is over too. (I cannot weed gardens by hand for example.) Would I be able to use a barbell safely and effectively?

2. Assuming the answer to #1 is yes, I'd be fine with one... how do you buy a barbell? Do you usually get plates with it (that is what they call the barbell weights isn't it?) or do you purchase those separately? What weights would you start with if you buy them separately? Also, is there a standard weight for the bar? If not, how do you choose the weight to get for that?

3. Can you store the bar and plates separately (to save space)?

4. Anything else I should know?

Thanks for the help!

Guest guest
Posted

Thanks for the help ! As far as the gripping goes, I just meant how hard do you have to grip it with your fingers? It looks like you're holding it with a closed fist kind of grip instead of the fingers more loose like I hold a dumbbell but I'm hearing differently from you and others so that makes me feel better. I can't do a closed fist grip with weights.

Re: barbell questions

,

You can buy a bar bell set that should come with a certain amount of plates with it. I bought my with 100 lb. My bar bell alone weighs 10 lb. so if I had 2 10 LB plates that makes me be using 30 lb. I use to forget to add in the weight of the bar bell so I was lifting more than I thought.

You can get a bar bell with plates for a pretty reasonable price. I think you can even get a nice set at Walmart. I bought mine at a sporting goods store marked down. I can't remember what I paid, but it was well worth it because I've got a lot of great use.

I'm not sure what you mean about the gripping of the bar bell. I usually always wear weight gloves which help me to get a better grip, but I just hold the bar bell like I'd hold a dumb bell.

~**~

Get fantasy football with free live scoring. Sign up for FanHouse Fantasy Football today.

Guest guest
Posted

Thanks a lot!!

Re: barbell questions

I had a really hard time finding a light barbell, most are ridiculous, like 25 lbs. You want to look for an aerobic barbell set because the bars are light, around 5 lbs. I had bought a 50lb plate set on clearance at target last year, it is great, the ends are encased in rubber and they are octagon shaped so they don't roll on the floor or clink together on the bar. They have the handgrips so you can use them in place of dumbells. Since I already had the plates, I just bought the bar at this site:http://www.fitness1st.com/Troy-Bars.html (towards bottom of page)I went to play it again sports and got some quick release end caps, couldn't find them anyplace else. With an aerobic bar, they are usually smaller in diameter than a traditional barbell, so if you decide to get quick release caps, you'll have to be carefull on size.HTH!>> Okay, I did MIS (Cathe's Maximum Intensity Strength) this morning and absolutely loved it! Anyway, I'm seriously considering finding space for a barbell now but have a couple of questions.> > 1. This is most important... how tightly do you have to grip a barbell? I know with dumbbells you don't want to grip them super tightly (my fingers are usually really loose) but is that also true with barbells? My RA affects my fingers most with grip especially being affected most days. I cannot grip things tightly without dealing with a lot of pain especially when I release and later on, after whatever I'm doing is over too. (I cannot weed gardens by hand for example.) Would I be able to use a barbell safely and effectively?> > 2. Assuming the answer to #1 is yes, I'd be fine with one... how do you buy a barbell? Do you usually get plates with it (that is what they call the barbell weights isn't it?) or do you purchase those separately? What weights would you start with if you buy them separately? Also, is there a standard weight for the bar? If not, how do you choose the weight to get for that?> > 3. Can you store the bar and plates separately (to save space)?> > 4. Anything else I should know?> > Thanks for the help!> > >

Guest guest
Posted

Good to know this too, thanks Darcy!

Re: Re: barbell questions

Great points. I have my wal-mart set with the 5lb bar, and then I have a 15lb bar as well. The 15lb bar is obviously made a lot better and could support a lot more weight, but i have no preference when using either barbell.Darcy

On Tue, Jul 29, 2008 at 8:40 AM, c_kleist <ckleistcomcast (DOT) net> wrote:

I had a really hard time finding a light barbell, most are ridiculous, like 25 lbs. You want to look for an aerobic barbell set because the bars are light, around 5 lbs. I had bought a 50lb plate set on clearance at target last year, it is great, the ends are encased in rubber and they are octagon shaped so they don't roll on the floor or clink together on the bar. They have the handgrips so you can use them in place of dumbells. Since I already had the plates, I just bought the bar at this site:http://www.fitness1st.com/Troy-Bars.html (towards bottom of page)I went to play it again sports and got some quick release end caps, couldn't find them anyplace else. With an aerobic bar, they are usually smaller in diameter than a traditional barbell, so if you decide to get quick release caps, you'll have to be carefull on size.HTH!>> Okay, I did MIS (Cathe's Maximum Intensity Strength) this morning and absolutely loved it! Anyway, I'm seriously considering finding space for a barbell now but have a couple of questions.> > 1. This is most important... how tightly do you have to grip a barbell? I know with dumbbells you don't want to grip them super tightly (my fingers are usually really loose) but is that also true with barbells? My RA affects my fingers most with grip especially being affected most days. I cannot grip things tightly without dealing with a lot of pain especially when I release and later on, after whatever I'm doing is over too. (I cannot weed gardens by hand for example.) Would I be able to use a barbell safely and effectively?> > 2. Assuming the answer to #1 is yes, I'd be fine with one... how do you buy a barbell? Do you usually get plates with it (that is what they call the barbell weights isn't it?) or do you purchase those separately? What weights would you start with if you buy them separately? Also, is there a standard weight for the bar? If not, how do you choose the weight to get for that?> > 3. Can you store the bar and plates separately (to save space)?> > 4. Anything else I should know?> > Thanks for the help!> > >

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...