Guest guest Posted February 13, 2006 Report Posted February 13, 2006 Many mycotoxins, including all the aflatoxins, contain aromatic rings which absorb ultraviolet light. Any absorbance of ultraviolet light is likely to result in at least a little fluorescence. However, fluorescence alone is not sufficient evidence to prove or identify mycotoxins. There can be other reasons for fluorescence. The most common are optical brighteners used in detergents and paints, giving the " whiter than white " appearance, and better appearance of several other colors. These factors may be far stronger than the weak fluorescence of the trace levels of mycotoxins present. The ultraviolet light you mention is a fairly broad spectrum light, and not of tremendous intensity, since high intensity UV is hazardous to the eyes. Laboratories however can use this principal to identify at least some mycotoxins, using high pressure liquid chromatography coupled to a fluorescence detector. The chromatography unit separates components, giving a time for the component to elute, which can be compared elution times of reference samples. To specify the sample even more, the exact wavelengths at which the separated sample components fluoresce and the irradiation frequencies leading to that fluorescence are determined. I'm glad your doctors gave you the advice they did. American Academy of Allergy, Asthma and Immunology states very clearly on their web site: the best treatment of any allergy is allergen avoidance. Continued exposure simply increases sensitivity. Most of us on this board wish we had realized that fact much earlier. You may want to look at www.niosh.gov for the book in pdf format titled " Indoor Air Quality: a Guide for Building Owners and Facility Managers " . Also look at www.epa.gov for other government references on the hazards of mold in the workplace. Although many on this board think government agencies are not going far enough to emphasize the hazards of mold, at least they are doing something. And what better reference can you use for a government employer than another government agency. Many state departments of health also have web sites on this topic if your employer is more local than federal. Gil Date: Mon, 13 Feb 2006 04:30:57 -0000 From: " toxsickniagara " <toxsickniagara@...> Subject: questions regarding mold Sharon N. Kramer has referred me to your group to ask some questions that I have about mold. I am an asthmatic who has been sickened by Aspergillus and Stachybotrys at work. If you know the answers to these questions, please email them to me: 1. Will aflatoxins from Aspergillus fluoresce with an ultraviolet light which is manufactured for detection of pet urine stains? 2. Is this a conclusive method to speciate the mold? 3. Do mycotoxins from Stachybotrys fluoresce? If so, what color? 4. Can mold spores be transmitted from your workplace to your home on your shoes or clothing? 5. Can sewer flies transmit mold spores? 6. What type of doctor should I go to for treatment? My primary physician, ENT, and allergist do not know much about mold. They all just advise me to get out of the basement office that I work in. That's not that simple. If you do not know the answers, could you possibly direct me to someone who would? I work in a local government building which has had visible Stachybotrys and Aspergillus mold growth since July 2004. Unfortunately we did not ask the union to have it tested until June of 2005, almost a full year later, so it is spreading. The union does not want to spend the additional approximate $8,000 to have it speciated. The Public Works Department has ranged from at first saying it was not mold, to then saying it was not " bad mold " , to admitting it is Stachybotrys and Aspergillus but that it's not too much mold,and to them it is not a health hazard........ I'm sure you've heard these frustrating stories before, but I'm fighting for my health and that of my coworkers. Thank you for any information you can share with me. Quote
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.