Guest guest Posted August 14, 2010 Report Posted August 14, 2010 Hi: For the past 2 nights I made the frozen Barcardi pina colada mix. Both nights the end results were good but very thick and the machine started to smell and the blades didnt turn. The first night I put the whole can of the Barcardi mix, half a can of rum(5 oz) and 6 ounces of pineapple juice. That brought the liquid up to the 3oz. mark. Then I turned it to high without using the variable. That just seem to create a frozen colada that made the machine sound like it as burning out because nothing was moving and it started to smell. I scooped (not poured) lol into a glass and it tasted great anyhow. Tonight I also put the whole 10 oz frozen Barcardi mix, I added 7 ounces of rum because I thought that would help make the machines blade move instead of getting stuck(more rum,yummy). I filled the container with ice just to the be even with the top number (on the side). Then I started the speed on 1 and walked it up to 10 and it had big chunks of ice in there so I put it on high hoping to break them up. Then I got that big frozen mess again and had to scoop and not pour into in the glass. The end result was great but I would like to get a nice consistency to just pour. I know you are all thinking, WOW Pina's 2 nights in a row. No, I dont have an alcohol problem. I just try and try again until I master it. Besides what a tasty and fun drink time I am having(lol) Any suggestions to solve the issue would be great. Please let me know if I should using the variable speed and walk or just using high because of the ice. Thanks Quote
Guest guest Posted August 14, 2010 Report Posted August 14, 2010 "Walking the machine up" from VARIABLE 1 to HIGH isn't a bad way of doing things. Also, did you use the tamper to push everything down into the blades? That could account for some of your problems; also, bear in mind that at least 25% of your liquids-to-solids ratio should be just that--liquids.. Out of curiosity, how old is your machine? PIna Colada help needed Hi: For the past 2 nights I made the frozen Barcardi pina colada mix. Both nights the end results were good but very thick and the machine started to smell and the blades didnt turn. The first night I put the whole can of the Barcardi mix, half a can of rum(5 oz) and 6 ounces of pineapple juice. That brought the liquid up to the 3oz. mark. Then I turned it to high without using the variable. That just seem to create a frozen colada that made the machine sound like it as burning out because nothing was moving and it started to smell. I scooped (not poured) lol into a glass and it tasted great anyhow. Tonight I also put the whole 10 oz frozen Barcardi mix, I added 7 ounces of rum because I thought that would help make the machines blade move instead of getting stuck(more rum,yummy). I filled the container with ice just to the be even with the top number (on the side). Then I started the speed on 1 and walked it up to 10 and it had big chunks of ice in there so I put it on high hoping to break them up. Then I got that big frozen mess again and had to scoop and not pour into in the glass. The end result was great but I would like to get a nice consistency to just pour. I know you are all thinking, WOW Pina's 2 nights in a row. No, I dont have an alcohol problem. I just try and try again until I master it. Besides what a tasty and fun drink time I am having(lol) Any suggestions to solve the issue would be great. Please let me know if I should using the variable speed and walk or just using high because of the ice. Thanks Quote
Guest guest Posted August 14, 2010 Report Posted August 14, 2010 I did use the tamper but it was just frozen solid and the sound of the machine was scary so I just turned it off as to not burn it out. I see what you are saying about the 25% liquid. I only had about 12 oz of liquid in comparison to a frozewn mix and about 2 to 3 cups of ice. I quess less ice because more rum(liquid) may leave me with a lot of overnight house guest if I serve this at a get together. My machine is 10 years old, time to upgrade to the stainless. Can you trade them in? Quote
Guest guest Posted August 15, 2010 Report Posted August 15, 2010 Thanks for the info. A trade in is sounding like a nice idea. My college student daughter wants a VM too. It is going to be an expensive month. Quote
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.