Is E-Machine laptop fit to SCIO?

[Guest guest]

Hi,

Does anybody know the E-Machine laptop fit to SCIO or not?

Ed Wang

-----Original Message-----From: Kathy [mailto:kathyqx@...]Sent: Sunday, July 11, 2004 1:50 PMqxci-english Subject: Re: SCIO Instructions

EASY INSTRUCTIONS FOR SCIO: I will send this out again as I realized I did not change the Subject line on the previous message. I realized that many may not have seen it since it did not say SCIO on the Subject, and I am still getting requests for it.

Kathy

I sent this out today to all who have been asking about SCIO. To many to write to separately.

Okay guys, I give up! I've been trying to stay off the chat line so much so some of you others will want to give advise, and not "hog" the show, but I've had so many questions and seen so much regarding SCIO I can't be quiet any more. Everyone thinks the SCIO is some difficult, new process...it's not, it is just an addition. In fact it is so simplistic, it is to easy. So here is what you need to be aware of:

The SCIO (in Latin meaning "TO KNOW") IS THE SAME PROGRAM AS THE QXCI. That is right, what Jimmy is using for his QX is the same program as the one you are using for your SCIO. So what is the big deal? It's simple. The BOX. Where the QXCI will run with or without the Box attached the SCIO will only do the QX protocols that way. What does this mean? SIMPLE. There is one small button you need to be aware of when you have the SCIO if you loaded properly (which is 1 in about 4 times) you will automatically see the button on the bottom of your page saying "Bodyviewer" and another which says "Disease lexicon" The SCIO box activated these 2 buttons. If they did not "come up" on their own then you should be able to go into the test matrix under the ruler bar "programs" and click on SCIO Bodyviewer and it will bring up the missing button on the "bottom ruler bar of your computer screen" If you go into the dictionary then the missing button for "disease lexicon" should appear. This is the MANUAL METHOD to activate the SCIO.

You open the panels for the dictionary by clicking on the button now, instead of at the top of your page under your ruler bar. And you open the bodyviewer by clicking on this button. YOU HAVE A QXCI AND NOT A SCIO AND YOU CAN'T GET THIS TO HAPPEN....YOUR RIGHT, NO SCIO BOX ... NO BUTTON. That is the only trick here. You have the SCIO but is is not attached...yep you guessed it no button will come up. You can't get the new program to work on your QXCI, read the last paragraph and you'll know why.

Now what? Well here's the tough part, click on that bodyviewer button, now click on any of the top ruler bar panels to bring up areas you can piggy back. So if you want to work on Digestion you can click on it, and then choose which part... liver, or small intestine, etc. and yes you can add as many as you like. But remember this biofeedback piggyback will run through the whole session of your therapy, so as with many things, the more you piggy back the less time it has on any of the areas. So if you want more work on fewer items, put fewer in the piggy back. Click on each of the drop downs, you'll see what they do, they are self explanatory. With a couple exceptions. The homeopathic button will bring up a page with writing (watch the slide on the side of your page) the control buttons are at the bottom, including the close. To stop a panel you'll see the stop button on the ruler bar. The spinal (total) will always bring up a mans picture. The Acupuncture will bring up a man or woman depending on hormonal issues. If a man comes up for a woman watch the hormones and vise versa.

Lastly, There are 12 pictures on the left side of your screen when you first brought this up these are the 'BODYVIEW" panels and it will run the ONE you choose until you stop the picture throughout the whole program, but you can only choose ONE. To run throughout the program you have to click on this before you start the acu pict or the spinal or the chackra pictures to access them easiest, you can still piggyback, but you have to be quick, because you'll notice they will pop out when the picture is changing in the spinal.

Watch out with your clients when activating the Cancer tumor button, it's nice but be sure your clients DON'T think it means they HAVE cancer, its trying to eradicate any possible tumors. When you are done use the "-" in the upper right corner to minimize the page and let it run. It is that simple, let's not make it tough. Sure I could write a whole book for it, but it means I would just be putting one issue on each page and they are all done the same way. I will be putting these in an update disk for those who own my manual, but it's so simple.

You want to finish and work on your next client...look at the bottom of your page and click that "bodyviewer" button again with your right clicker. It will ask if you want to close...the answer is yes. YOU CAN NOT START YOUR NEXT PERSON UNTIL YOU HAVE CLOSED BOTH THE BODYVIEWER AND THE CLASP 32, if you do you will try and have 2 consecutive programs running...want to mess up your computer and the program, well that is a good way to do it. If you open your Clasp 32 program (and it is not right after you reloaded the new program) and you are asked for your name and country, your program is still running. Now I did have mine do that last week and nothing else was running, put in my information and went on, guess what all my files were gone! So if it happens like this, just stop. Take out your disk and re-load the first 2 steps and your information will be back when you go into Clasp the next time. Just don't hit step 3. You will have to put your name and country in after you do part 1 & 2 but only that one time, if the # in the upper left corner is not a one digit number you will have a problem with access codes, but only if that happens (it should not happen).

As to the colored spots in the intestine or in any organ... these will happen later when Bill gets the visor done. Right now we just have 12 pretty pictures that more around. These 12 should be increasing to 250...one step at a time. If any of your pictures don't work then something is wrong with the graphics.

If you can't get it to work at all...it's either a bad disk or your computer is to small. If the Dictionary doesn't work, expect it is the disk. This program must have at least a Pentium 4 and at least a 2000 professional or XP Professional. The older computers do not have enough to do this. So if someone has "upgraded" you to a XP Professional and loaded this NEW program so you can use it with the SCIO when you get one, they will mess you up big time... Your computer is not big enough. Go back to your old program.

Well, hope that clears up all the confusing "MUDD" that has been going on. Don't forget all the other piggybacks still work as before like the Orgone/ELF portion.

Yours in Health,

KathyJim Gooley <jimgooley@...> wrote:

Hi Kathy,

I can't seem to find a link to access your wonderful SCIO instructions. I see all the chatter but can't find the source Could you forward a link?

Much appreciated

Jim

Jim Gooley, MA Quantum Biofeedback 310-488-2929

jimgooley@...www.quantumlight.us............................................