Guest guest Posted December 27, 2010 Report Posted December 27, 2010 Hello Marc, that can only be explained by the existance of longitudinal waves. Where transversal waves stop, longitudinal waves go much farther. In some way, your badge reinforces longitudinal waves. Shielding (with f.i. aluminium foil) does not help, because longitudinal waves pass right through metallic shieldings. (Years ago, my wife experienced trouble sitting right behind a satellite dish, some 5 meters away. I could not measure anything, but dismounting this dish resolved the problem.) I suggest that you place a BioProtect card behind your badge. Greetings, Claessens member Verband Baubiologie www.milieuziektes.nl www.milieuziektes.be www.hetbitje.nl checked by Norton Re: Now: RFID and insomnia, Was: cell phone towers/ Marjij and > But I can hardly imagine, that bank cards are emitting when not scanned. I have a work ID badge that bothers me when it is: 1) on my person, and 2) I am around strong EMF sources (computers, florescent lights) I don't think the badge is emitting anything, but it could be the antenna that's built into the badge to pick up a 100-150khz signal combined with ambient EMF that's bothering me. I have tried shielding it, and even once put it in a special badge holder that " mis-tunes " the antenna so it doesn't respond to the proximity transmitters (confirmed by my own testing), but nothing eliminates my reaction to the badge other than getting it away from me. So yes, it's not emitting anything, but it still bothers me... Marc Quote
Guest guest Posted December 27, 2010 Report Posted December 27, 2010 > I suggest that you place a BioProtect card behind your badge. Yes, I can give that a try... I did try putting a small tachyon silica disc directly behind the chip that the badge's internal antenna connects to, and I do think that this helps the symptoms somewhat. Marc Quote
Guest guest Posted December 27, 2010 Report Posted December 27, 2010 , where can I find scientific facts about longitudinal waves? /anders charles skrev 2010-12-27 11:39: > > Hello Marc, > > that can only be explained by the existance of > longitudinal waves. > > Where transversal waves stop, longitudinal waves go much > farther. > > In some way, your badge reinforces longitudinal waves. > Shielding (with f.i. aluminium foil) does not help, > because longitudinal waves pass right through metallic > shieldings. > > (Years ago, my wife experienced trouble sitting right > behind a satellite dish, some 5 meters away. I could not > measure anything, but dismounting this dish resolved the > problem.) > > I suggest that you place a BioProtect card behind your badge. > > Greetings, > Claessens > member Verband Baubiologie > www.milieuziektes.nl > www.milieuziektes.be > www.hetbitje.nl > checked by Norton > > Re: Now: RFID and insomnia, Was: cell > phone towers/ Marjij and > > > But I can hardly imagine, that bank cards are emitting > when not scanned. > > I have a work ID badge that bothers me when it is: > > 1) on my person, and > 2) I am around strong EMF sources (computers, florescent > lights) > > I don't think the badge is emitting anything, but it could be > the antenna that's built into the badge to pick up a > 100-150khz > signal combined with ambient EMF that's bothering me. I > have tried > shielding it, and even once put it in a special badge holder > that " mis-tunes " the antenna so it doesn't respond to the > proximity transmitters (confirmed by my own testing), but > nothing eliminates my reaction to the badge other than > getting > it away from me. > > So yes, it's not emitting anything, but it still bothers me... > > Marc > > Quote
Guest guest Posted December 27, 2010 Report Posted December 27, 2010 Hello Anders, I do now know. This theme is very controversial. Dr. Gruen has written something about it. Prof. Meyl has published something about it. I myself have encountered some experiences, which only could be explained by longitudinal waves. Greetings, Claessens member Verband Baubiologie www.milieuziektes.nl www.milieuziektes.be www.hetbitje.nl checked by Norton Re: Now: RFID and insomnia, Was: cell > phone towers/ Marjij and > > > But I can hardly imagine, that bank cards are emitting > when not scanned. > > I have a work ID badge that bothers me when it is: > > 1) on my person, and > 2) I am around strong EMF sources (computers, florescent > lights) > > I don't think the badge is emitting anything, but it could be > the antenna that's built into the badge to pick up a > 100-150khz > signal combined with ambient EMF that's bothering me. I > have tried > shielding it, and even once put it in a special badge holder > that " mis-tunes " the antenna so it doesn't respond to the > proximity transmitters (confirmed by my own testing), but > nothing eliminates my reaction to the badge other than > getting > it away from me. > > So yes, it's not emitting anything, but it still bothers me... > > Marc > > Quote
Guest guest Posted December 27, 2010 Report Posted December 27, 2010 The passive rfids could be transmitting even w/o the proper reader, any frequency hitting them like a radio station that won't tune in, would cause an emission. Being we live mainly in chronic elektrosmog, they are going to be emitting pretty much constantly. Then there are the active and semiactive rfids that have been around for quite a few years already, and do emit constantly. They also tend to cause cancer, and the lithium batteries in them corrode and be a problem to the skin, per former Motorola worker, and that was almost two decades ago I knew about this. http://www.axcessinc.com/knowledge/whitepapers/ActiveRFID.pdf http://www.youtube.com/watch?v=-XXaqraF7pI & feature=player_embedded Don't ya just feel safe now with your chipped passport? http://www.computerweekly.com/Articles/2006/12/19/220768/Trackable-clothing-unve\ iled.htm chipped clothing, read everywhere you're online. Watch all your new cards, 2011 is when the US is suppose to issue all those national ids. These things can be read at a much further distance than said. Search Bluetooth rifle for an example. But then satellites can read some too. ~ Snoshoe > > Hello Marc, > > that can only be explained by the existance of longitudinal waves. > > Where transversal waves stop, longitudinal waves go much farther. > > In some way, your badge reinforces longitudinal waves. > Shielding (with f.i. aluminium foil) does not help, because longitudinal waves pass right through metallic shieldings. > > (Years ago, my wife experienced trouble sitting right behind a satellite dish, some 5 meters away. I could not measure anything, but dismounting this dish resolved the problem.) > > I suggest that you place a BioProtect card behind your badge. > > Greetings, > Claessens > member Verband Baubiologie > www.milieuziektes.nl > www.milieuziektes.be > www.hetbitje.nl > checked by Norton > > Re: Now: RFID and insomnia, Was: cell phone towers/ Marjij and > > > > But I can hardly imagine, that bank cards are emitting when not scanned. > > I have a work ID badge that bothers me when it is: > > 1) on my person, and > 2) I am around strong EMF sources (computers, florescent lights) > > I don't think the badge is emitting anything, but it could be > the antenna that's built into the badge to pick up a 100-150khz > signal combined with ambient EMF that's bothering me. I have tried > shielding it, and even once put it in a special badge holder > that " mis-tunes " the antenna so it doesn't respond to the > proximity transmitters (confirmed by my own testing), but > nothing eliminates my reaction to the badge other than getting > it away from me. > > So yes, it's not emitting anything, but it still bothers me... > > Marc Quote
Guest guest Posted December 27, 2010 Report Posted December 27, 2010 New I forgot something. Heard on a Spokane radio station this morning (lots of static and weirdness in the air coming through this a.m.) about a toll bridge somewhere in WA state, they are not having toll booths though, but will just read your license number and send you a bill, or you can get a ?don't have name of program, but rfid pass to stick in your windshield, sorta like greenpass has been using for truckers for some time now. UGGH. Well, more and more of us are being affected that weren't previous to digital tv, smart meters and live rfids. So, maybe that will spur more change sooner now. ~ Snoshoe > > The passive rfids could be transmitting even w/o the proper reader, any frequency hitting them like a radio station that won't tune in, would cause an emission. > > Being we live mainly in chronic elektrosmog, they are going to be emitting pretty much constantly. > > Then there are the active and semiactive rfids that have been around for quite a few years already, and do emit constantly. They also tend to cause cancer, and the lithium batteries in them corrode and be a problem to the skin, per former Motorola worker, and that was almost two decades ago I knew about this. > http://www.axcessinc.com/knowledge/whitepapers/ActiveRFID.pdf > > http://www.youtube.com/watch?v=-XXaqraF7pI & feature=player_embedded Don't ya just feel safe now with your chipped passport? > > http://www.computerweekly.com/Articles/2006/12/19/220768/Trackable-clothing-unve\ iled.htm chipped clothing, read everywhere you're online. > > Watch all your new cards, 2011 is when the US is suppose to issue all those national ids. > > These things can be read at a much further distance than said. Search Bluetooth rifle for an example. But then satellites can read some too. > > ~ Snoshoe > Quote
Guest guest Posted December 28, 2010 Report Posted December 28, 2010 > > , > > where can I find scientific facts about longitudinal waves? > > /anders > , try Col. Tom Bearden. He knows everything about everything. He looks pretty grungy because he was burned in a radar wave and almost died, but he is doing okay and is a brilliant nuclear physicist. He is the ultimate source of info that you want and that the govt wishes never got out. http://66.49.160.53/pub/bearden/scalar_wars.htm If the link doesn't work, go to www.cheniere.org and look around. Marji Quote
Guest guest Posted December 28, 2010 Report Posted December 28, 2010 I would think the following shielding approaches would work: 1. magnetic shielding: mu metal or something like that. If you know what frequency it's designed to use as a power source make sure the material shields well at that frequency. If you use some kind of material that isn't too conductive add a layer of aluminum foil too. 2. Thick aluminum, like 1/4 " should also do the trick, using eddy currents. Or thick copper. 3. The other approach is to let the chip be powered but try to block the RF. This is not easy but if you have really good conductivity all the way around it should be possible. Try 3 layers of tight aluminum foil. For the second and third layers, try crumpling the foil first. Or add some RF absorber material. I think the first layer you want as tight as possible. I think there are a lot of broadband sources like fluorescent lights that will charge up the devices. Bill On Mon, Dec 27, 2010 at 8:20 AM, Marc <marc@...> wrote: > > > > I suggest that you place a BioProtect card behind your badge. > > Yes, I can give that a try... I did try putting a small tachyon > silica disc directly behind the chip that the badge's > internal antenna connects to, and I do think that this > helps the symptoms somewhat. > > Marc > > Quote
Guest guest Posted December 28, 2010 Report Posted December 28, 2010 > I would think the following shielding approaches would work: > 1. magnetic shielding: mu metal or something like that. > 2. Thick aluminum, like 1/4 " should also do the trick Heh, heh, well it's not going to work well as a photo ID badge if it's all covered in shielding! :-) Marc Quote
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.