Jump to content
RemedySpot.com

Re: soap help

Rate this topic


Guest guest

Recommended Posts

Liz..

Looks like you either have to break it in for him

or get him to use the scrubby! lol

Have you tried putting sugar in the recipe? Its 1

tsp per pound of oil. Dissolve the sugar in the

water before you put in the lye.

Coconut Oil? Max 25% of the Oil. It gives great

lather.

I have heard if you add Palm or Palm Kernel to the

Coconut Oil with

your base oil, it lathers better too.

Jany

> From: Liz <h1374@...>

>

> Hi list,

> I've been making cp for some time now and made many different recipes but I

still find that the same time happens. When I use a new bar of soap, it takes a

couple uses before it lathers well. I use a bath scrubby, so I have no problem

with lather, but my husband washes with the bar it's self (just rubs the bar on

his skin),and ask if I can get it to work faster...lol. So any ideals on what I

can do?

Link to comment
Share on other sites

Jany,

My hubby with a scrubby! ..lol, no way!

Thanks, i'll try the sugar next bath and see what happens.

Liz

----------

From: Jany[sMTP:jany@...]

Sent: Friday, December 31, 1999 3:36 PM

Liz

Cc: 'onelist'

Subject: Re: soap help

Liz..

Looks like you either have to break it in for him

or get him to use the scrubby! lol

Have you tried putting sugar in the recipe? Its 1

tsp per pound of oil. Dissolve the sugar in the

water before you put in the lye.

Coconut Oil? Max 25% of the Oil. It gives great

lather.

I have heard if you add Palm or Palm Kernel to the

Coconut Oil with

your base oil, it lathers better too.

Jany

> From: Liz <h1374@...>

>

> Hi list,

> I've been making cp for some time now and made many different recipes but I

still find that the same time happens. When I use a new bar of soap, it takes a

couple uses before it lathers well. I use a bath scrubby, so I have no problem

with lather, but my husband washes with the bar it's self (just rubs the bar on

his skin),and ask if I can get it to work faster...lol. So any ideals on what I

can do?

Link to comment
Share on other sites

  • 1 year later...

Hi Beth, You've asked a question that is really a very long course of

study. However, here is a short and incomplete answer. The basic ratio

is: three sodium hydroxide molecules react with one fat molecule to form

three soap molecules and one glycerin molecules. And so its important to

measure correctly. In order to translate the amount of molecules required

to the weight measurements in your formulation, saponification tables were

made. I suggest you read Given Nerius's book on " Soapmaking for Fun &

Profit " for the saponification tables and a good explanation on how to use

them. Also there are a few web sites containing, saponification tables, lye

calculators, SAP values and other ways help you make your own recipes. Have

fun on this research project.

Lynne B.

www.chemlyn.com

soap help

> Hi, my name is Beth and I just joined the list. I would like to make my

own

> recipes for my soap but I'm not sure how to start from scratch. My main

> question is this: is there a basic ratio of fats(or oils) to lye to water?

> Since I am not follow a recipe with a set amount I'm not sure how much of

> each medium to use. Any tips would be greatly appreciated! Thanks, Beth

>

>

>

Link to comment
Share on other sites

Welcome, Beth!

For the ratios I suggest making your recipe using Magestic Mountain

Sage's Lye Calculator http://www.thesage.com/calcs/lyecalc.html -

just put in the amount of fats you want to use, and the kind of lye

(sodium/potassium chloride, crystals or dissolved in liquid) - and it

will tell you how much water and how much lye, including what amount

of lye would leave it at a certain % of superfatting (extra oil that

makes sure the soap is gentle and moisturizing). To find out what

kind of oils to use, well there's a LOT of web pages that list oils

and their properties, include some intricate details like about

iodine content and whatnot. (More iodine in oils makes softer soap

hehe.:) Most soapmaking info webpages have at least some sort of list

of oils commonly used. Have fun! It's not too difficult as long as

you remember it's a delicate chemical reaction, and steps can't be

skipped, and ingredients shouldn't be replaced (without at least

knowing what they do pretty well). HTH!! ^_^

-Cora

>Hi, my name is Beth and I just joined the list. I would like to make

my own recipes for my soap but I'm not sure how to start from

scratch. My main question is this: is there a basic ratio of fats(or

oils) to lye to water? Since I am not follow a recipe with a set

amount I'm not sure how much of each medium to use. Any tips would be

greatly appreciated! Thanks, Beth

Link to comment
Share on other sites

  • 2 years later...

No matter what you do to rose petals in soap they always turn that pukey color.

It's just one of those life things.

MAKE A HAPPY MEMORY EVERY DAY:

Alternasense Skin Design Products

www.alternasense.com

soap help

Well, I don't know where my last post disappeared to but,...here I am

again,..so sorry if it shows up and you get double posts..! :-D

My question is that of a soap making disaster. I made a batch of hand

milled soap to which I am new (I usually do the melt and pour method).

and the darn stuff won't set. Not exactly,..it sets but very soft.

too soft to come out of the mold clean. Any suggestions out there as

to what I might have done wrong??

also, I added rose petals and they turned a

" lovely " (gross!) shade of peuke brown....what should I use to

preserve those?

So much for my goats milk and rose soap adventure,...it sounded good

anyway..

Thanks! any advice is appreciated!

Blessings!

CK...in Oregon

Link to comment
Share on other sites

You might have too much liquid in your recipe. Can you post it along with

what you did (ie did you grate a bar of soap and add the goat's milk to it,

or did you start with oils and lye) so we can better guess what went wrong?

<(((><

soap help

Well, I don't know where my last post disappeared to but,...here I am

again,..so sorry if it shows up and you get double posts..! :-D

My question is that of a soap making disaster. I made a batch of hand

milled soap to which I am new (I usually do the melt and pour method).

and the darn stuff won't set. Not exactly,..it sets but very soft.

too soft to come out of the mold clean. Any suggestions out there as

to what I might have done wrong??

also, I added rose petals and they turned a

" lovely " (gross!) shade of peuke brown....what should I use to

preserve those?

So much for my goats milk and rose soap adventure,...it sounded good

anyway..

Thanks! any advice is appreciated!

Blessings!

CK...in Oregon

Link to comment
Share on other sites

  • 3 years later...

Dear Stuck,

I am sorry that the blincinc is not working out...

Have you thought about making your own soap?

About 6 years I started making my own soap from

scratch and shared it with others. Friends who had

various skin problems (hives/allergies/rashes) told me

that when they used my soap their skin cleared up. I

was amazed as I was not even trying to do that, just

trying to make soap that had no artificial junk in it.

I used coconut, palm and olive oils, sometimes goat's

milk and honey and essential oils. I have used the

soap on body and hair, then I follow it with a diluted

vinegar rinse and it leaves my hair shiny and clean

and no itching! You may want to try a *diluted*

vinegar rinse after using the blincinc, as vinegar

restores the skin's pH and helps to reduce itching.

I have been studying Dr. Fife's Coconut books and have

been making coconut milk at home and plan to use that

in soaps next instead of goat's milk. I want to try a

plain coconut oil and coconut milk soap next and see

how that works out. (But no fake coconut scent! ;-) )

I don't make soap full-time as I am busy with a lot of

things, but I do make custom batches for people when

requested.

If you are ambitious and have the time, you can get

the book The Soapmaker's Companion by

Cavitch and try your hand at making a soap that best

suits your family. Another resource is

www.millersoap.com that is a great place for

soapmakers to learn and share their problems.

Let me know if I can help you further with your soap

problem-feel free to contact me off-list at

roseofsharonn2001@....

Sincerely,

Sharon Cutting, A.S., Cert. in Aromatherapy, Cert. in

Aromatherapy Chemistry (Australasian College of Health

Sciences)

--- Stuck <Sstuck@...> wrote:

> I have been using blincinc on my kids but it seems

> to be having a bad reaction on them and drying my

> hair out something awful, but I want natural not

> rain or anything else you can get in a grocery

> store. any ideas? or should I just supplement with

> the CO?

>

> Stuck

>

>

>

> ---

> avast! Antivirus: Outbound message clean.

> Virus Database (VPS): 0636-3, 09/08/2006

> Tested on: 9/8/2006 3:19:05 PM

> avast! - copyright © 2000-2006 ALWIL Software.

> http://www.avast.com

>

>

>

>

> [Non-text portions of this message have been

> removed]

>

>

__________________________________________________

Link to comment
Share on other sites

Hi Stuck,

You may want to look at Young Living products.

My son had a very itchy, flaky head and when he started using the Lavender

Shampoo and Conditioner it cleared up.

The products are all natural and organic, guaranteed.

I've been reading about the other health challenges you've been talking

about and you may want to check out the NingXia Red Juice on the sight also.

It's a whole food drink that it great for diabetics (not that you are one

but many folks are) check the drink out here:

http://totalhealth.myningxia.com

Check out this website for more info:

www.totalhealthandincome.com

Take care,

~ Jackie

soap help

I have been using blincinc on my kids but it seems to be having a bad

reaction on them and drying my hair out something awful, but I want natural

not rain or anything else you can get in a grocery store. any ideas? or

should I just supplement with the CO?

Stuck

---

avast! Antivirus: Outbound message clean.

Virus Database (VPS): 0636-3, 09/08/2006

Tested on: 9/8/2006 3:19:05 PM

avast! - copyright © 2000-2006 ALWIL Software.

http://www.avast.com

Link to comment
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...