Guest guest Posted October 28, 2007 Report Share Posted October 28, 2007 Hi all, I'm doing two shots a week (100mg per week) and have mostly used my outer thighs and upper-outer buttocks regions. Since the injection goes into the muscle, is there any reason not to inject into the upper-outer arms? It's still muscle, and since it's only about .25 cc's I can't see why that wouldn't be another place to switch up to. Also, for those who draw with one needle and inject with a different one. How much do you draw in to the 1st needle? If I'm supposed to inect .25cc and I draw that much, when I change needles and push the plunger until a drop reached the tip, I the syringe shows less the .25cc at that point? Should I draw more initially or am I okay? Thanks!! Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 29, 2007 Report Share Posted October 29, 2007 As far as injecting into the arm I have no reply, but regarding the drawing with a separate needle I use a 20guage to draw, I usually pull out just a hair line over my dose and make certain once you do draw and remove the needle from the bottle (you draw the T back out of the needle) before switching needles, this is probably where you are loosing quantity, then install your new needle and remove the air, after that you should be good to go. On 10/28/07, Woolf <fkw1122@...> wrote: > > Hi all, > > I'm doing two shots a week (100mg per week) and have mostly used my > outer thighs and upper-outer buttocks regions. Since the injection > goes into the muscle, is there any reason not to inject into the > upper-outer arms? It's still muscle, and since it's only about .25 > cc's I can't see why that wouldn't be another place to switch up to. > > Also, for those who draw with one needle and inject with a different > one. How much do you draw in to the 1st needle? If I'm supposed to > inect .25cc and I draw that much, when I change needles and push the > plunger until a drop reached the tip, I the syringe shows less the .25cc > at that point? Should I draw more initially or am I okay? > > Thanks!! > > > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 29, 2007 Report Share Posted October 29, 2007 , I didn't draw back, because I was afraid of getting too much air in the syringe. I realize now, after I read what you said I should have been..I hate overlooking something obvious like that... Thanks!! > > > > Hi all, > > > > I'm doing two shots a week (100mg per week) and have mostly used my > > outer thighs and upper-outer buttocks regions. Since the injection > > goes into the muscle, is there any reason not to inject into the > > upper-outer arms? It's still muscle, and since it's only about .25 > > cc's I can't see why that wouldn't be another place to switch up to. > > > > Also, for those who draw with one needle and inject with a different > > one. How much do you draw in to the 1st needle? If I'm supposed to > > inect .25cc and I draw that much, when I change needles and push the > > plunger until a drop reached the tip, I the syringe shows less the ..25cc > > at that point? Should I draw more initially or am I okay? > > > > Thanks!! > > > > > > > > > > > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 29, 2007 Report Share Posted October 29, 2007 Have you read this. http://anabolicminds.com/forum/male-anti-aging/70897-guest-lecturer-ii.html Woolf <fkw1122@...> wrote: , I didn't draw back, because I was afraid of getting too much air in the syringe. I realize now, after I read what you said I should have been..I hate overlooking something obvious like that... Thanks!! > > > > Hi all, > > > > I'm doing two shots a week (100mg per week) and have mostly used my > > outer thighs and upper-outer buttocks regions. Since the injection > > goes into the muscle, is there any reason not to inject into the > > upper-outer arms? It's still muscle, and since it's only about .25 > > cc's I can't see why that wouldn't be another place to switch up to. > > > > Also, for those who draw with one needle and inject with a different > > one. How much do you draw in to the 1st needle? If I'm supposed to > > inect .25cc and I draw that much, when I change needles and push the > > plunger until a drop reached the tip, I the syringe shows less the ..25cc > > at that point? Should I draw more initially or am I okay? > > > > Thanks!! > > > > > > > > > > > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 30, 2007 Report Share Posted October 30, 2007 Phil, I went to that link and read through all the pages. I saw where the question was asked about arm vs thigh, but didn't see an answer?? Thanks > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 30, 2007 Report Share Posted October 30, 2007 I had a site that showed all the different areas you could inject but I'm having trouble finding it. Here is some information about your question.. http://www.euromuskeln.com/information.php?page=inject http://www.articleonramp.com/Article.cfm?ID=1270 On Oct 30, 2007 2:19 AM, Woolf <fkw1122@...> wrote: > Phil, > > I went to that link and read through all the pages. I saw where the > question was asked about arm vs thigh, but didn't see an answer?? > > Thanks > > > > > > > > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 30, 2007 Report Share Posted October 30, 2007 sorry wrong link. http://spotinjections.com/index3.htm Woolf <fkw1122@...> wrote: Phil, I went to that link and read through all the pages. I saw where the question was asked about arm vs thigh, but didn't see an answer?? Thanks > > Co-Moderator " Don't believe anything you hear and only half of what you see. " Phil __________________________________________________ Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 30, 2007 Report Share Posted October 30, 2007 http://www.spotinjections.com/index3.htm > > > > > > > > > > > > > Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.