Guest guest Posted March 21, 2006 Report Share Posted March 21, 2006 Hey everyone. I had a meeting at my daughters' school today. The Autism team came in and tried to help the other kindergartners understand AS. It was very nice. Also Thursday, I have another meeting, where we are going to discuss getting her an aide. I guess this is called the TSS. I'm still not up with the " lingo. " I was reading the messages, and I also feel like Mel will never stop wearing pull-ups. She sleeps soooooo deep throughout the night. As of yet, she isn't on any meds, but I feel that to help her concentrate better at school, they should prescribe her something. I hope everyone is well. For now, I must go. Take care!! Pam W. Quote Link to comment Share on other sites More sharing options...
Guest guest Posted June 27, 2008 Report Share Posted June 27, 2008 Hi , Thank you. I can't really get help until I get out of this toxic living. Has anyone had success with shielding out there? I do have a doctor that I am using in Bensen Az but his treatment doesn't work unless you avoid exposure. The housing market is crap now & we'd loose a lot of money my husband will not be willing to let go. I can't really stay because it's too harmful to me. Like now I am having reaction & my skin is burning. Loni > > From: Less EMF Inc <lessemflessemf (DOT) com> > Subject: Re: Home Biologists Report/Need Help & Direction > groups (DOT) com > Date: Thursday, June 26, 2008, 3:54 PM > > > > > > > >> After thousands of dollars, I have been unsuccessful in shielding my >> bedroom from WiFi, TV towers, Cell Towers or Radar. Yes they are >> diminished on the meters, but after painting the room with Copper >> paint (grounded) and putting two different layers of fabric over the >> windows, I feel worse in their and consequently have made the room >> worse. I now sleep in another room of the house. > > Yes, that can happen. Remember, shielding usually means using > reflective materials. If your shield leaks, then radiation gets in and > is more or less trapped inside, bouncing around until it is finally > absorbed by something... and that something might be you. > > Using a layer of RF absorber, on the inide of the shield, can elimated > this phenomenon. So you end up with the best of both worlds: lower > readings on the meter because less radiation is coming in, plus any > tiny bit that does leak in gets absorbed by something other than your > body. > > Emil > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted June 27, 2008 Report Share Posted June 27, 2008 writes: and extreme behavior This is the second post about behavior I've seen today so I was wondering what you all are talking about? Like getting angry, depressed, or what? Amy **************Gas prices getting you down? Search AOL Autos for fuel-efficient used cars. (http://autos.aol.com/used?ncid=aolaut00050000000007) Quote Link to comment Share on other sites More sharing options...
Guest guest Posted June 27, 2008 Report Share Posted June 27, 2008 In a message dated 6/27/2008 6:08:04 P.M. GMT Daylight Time, loni326@... writes: Using a layer of RF absorber, on the inide of the shield, can elimated > this phenomenon. So you end up with the best of both worlds: lower > readings on the meter because less radiation is coming in, plus any > tiny bit that does leak in gets absorbed by something other than your > body. > > Emil > Emil can you suggest a specification here please ? UK Quote Link to comment Share on other sites More sharing options...
Guest guest Posted June 27, 2008 Report Share Posted June 27, 2008 In a message dated 6/27/2008 11:01:15 P.M. GMT Daylight Time, amcafeerr@... writes: Yes, depression, all the way to fits of rage. I have had 2 anxiety attacks and that is hard for me to even admit since I used to be superman! I also used to get a kind of " Lyme Rage " around cell phones radiation. Also, even to this day, I am drained emotionally and physically around microwave radiation after some time. It is like a very heavy feeling and then very drowsy (in addition to burning sensations and the other pains). Yes, I feel sad (victim and helpless) at times and then others I am so fu...king angry at this condition I could kill someone. Yes, angry, depressed, etc. Thank you for inviting the clarification. andrew On Jun 27, 2008, at 5:44 PM, _javamdnss@..._ (mailto:javamdnss@...) wrote: > > writes: > > and extreme behavior > > > This is the second post about behavior I've seen today so I was > wondering > what you all are talking about? Like getting angry, depressed, or what? > Amy > > > The sad thing is that Microwave sickness does all it says on the can ! Perhaps in knowing that the symptoms are almost a foregone conclusion for those with the knowledge and those with hybrid anatomical systems we can learn to ZEN over the vectors that carry the stuff. We are a collective with a highre purpose perhaps ?! Quote Link to comment Share on other sites More sharing options...
Guest guest Posted June 27, 2008 Report Share Posted June 27, 2008 Loni, I understand about the housing situation. Nobody likes to loose $10-50K or more on your biggest financial investment. Talk to your husband about the cost a staying there. There could be an even greater loss if you get cancer and die. At least in the short run, you are more likely going to freak out, get sicker, and probably end up getting a divorce because of the hell, conflict and extreme behavior. What are the " costs " of staying? Sure, you may loose some money if you try to sell it. Seriously look into renting it is selling is out of the question. Either way, it is time for you to leave for a while to take care of yourself. If your husband is bucking you, give him my phone number and tell him to call me. 919. 787.3022. On Jun 27, 2008, at 1:02 PM, Loni Rosser wrote: > > The housing market is crap now & we'd loose a lot of money my husband > will not be willing to let go. > > I can't really stay because it's too harmful to me. Like now I am > having reaction & my skin is burning. Quote Link to comment Share on other sites More sharing options...
Guest guest Posted June 27, 2008 Report Share Posted June 27, 2008 Yes, depression, all the way to fits of rage. I have had 2 anxiety attacks and that is hard for me to even admit since I used to be superman! I also used to get a kind of " Lyme Rage " around cell phones radiation. Also, even to this day, I am drained emotionally and physically around microwave radiation after some time. It is like a very heavy feeling and then very drowsy (in addition to burning sensations and the other pains). Yes, I feel sad (victim and helpless) at times and then others I am so fu...king angry at this condition I could kill someone. Yes, angry, depressed, etc. Thank you for inviting the clarification. andrew On Jun 27, 2008, at 5:44 PM, javamdnss@... wrote: > > writes: > > and extreme behavior > > > This is the second post about behavior I've seen today so I was > wondering > what you all are talking about? Like getting angry, depressed, or what? > Amy > > > > **************Gas prices getting you down? Search AOL Autos for > fuel-efficient used cars. > (http://autos.aol.com/used?ncid=aolaut00050000000007) > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted June 27, 2008 Report Share Posted June 27, 2008 Oh thanks so much I will pass that along. Maybe hearing it from someone else would be good. Loni > > The housing market is crap now & we'd loose a lot of money my husband > will not be willing to let go. > > I can't really stay because it's too harmful to me. Like now I am > having reaction & my skin is burning. Quote Link to comment Share on other sites More sharing options...
Guest guest Posted June 30, 2008 Report Share Posted June 30, 2008 A very convenient material which can be used to line walls, and ceilings is the Laminated Microwave Absorber http://www.lessemf.com/fabric.html#259 Absorber installation is much simpler than for a reflector as you don't have such a big concern about leakage points. Just cover a large area (maybe 75-90% of the surface). Emil Re: getting help > > In a message dated 6/27/2008 6:08:04 P.M. GMT Daylight Time, > loni326@... writes: > > Using a layer of RF absorber, on the inide of the shield, can elimated >> this phenomenon. So you end up with the best of both worlds: lower >> readings on the meter because less radiation is coming in, plus any >> tiny bit that does leak in gets absorbed by something other than your >> body. >> >> Emil >> > > > > Emil can you suggest a specification here please ? > UK > > > > > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted June 30, 2008 Report Share Posted June 30, 2008 lamination would be hard for us MCS to handle. Loni From: Less EMF Inc <lessemf@...> Subject: Re: getting help Date: Monday, June 30, 2008, 6:46 AM A very convenient material which can be used to line walls, and ceilings is the Laminated Microwave Absorber http://www.lessemf. com/fabric. html#259 Absorber installation is much simpler than for a reflector as you don't have such a big concern about leakage points. Just cover a large area (maybe 75-90% of the surface). Emil Re: getting help > > In a message dated 6/27/2008 6:08:04 P.M. GMT Daylight Time, > loni326 (DOT) com writes: > > Using a layer of RF absorber, on the inide of the shield, can elimated >> this phenomenon. So you end up with the best of both worlds: lower >> readings on the meter because less radiation is coming in, plus any >> tiny bit that does leak in gets absorbed by something other than your >> body. >> >> Emil >> > > > > Emil can you suggest a specification here please ? > UK > > > > > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted June 30, 2008 Report Share Posted June 30, 2008 So I talked to the manager at T Mobile & he said that the antenna puts out the power of a baby monitor! Ya right. Loni From: Less EMF Inc <lessemf@...> Subject: Re: getting help Date: Monday, June 30, 2008, 6:46 AM A very convenient material which can be used to line walls, and ceilings is the Laminated Microwave Absorber http://www.lessemf. com/fabric. html#259 Absorber installation is much simpler than for a reflector as you don't have such a big concern about leakage points. Just cover a large area (maybe 75-90% of the surface). Emil Re: getting help > > In a message dated 6/27/2008 6:08:04 P.M. GMT Daylight Time, > loni326 (DOT) com writes: > > Using a layer of RF absorber, on the inide of the shield, can elimated >> this phenomenon. So you end up with the best of both worlds: lower >> readings on the meter because less radiation is coming in, plus any >> tiny bit that does leak in gets absorbed by something other than your >> body. >> >> Emil >> > > > > Emil can you suggest a specification here please ? > UK > > > > > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted June 30, 2008 Report Share Posted June 30, 2008 Could you use that on the outside walls? And then the waves would be absorbed rather than be repelled. But..... would some still get through because it is absorbing them? Loni From: Less EMF Inc <lessemf@...> Subject: Re: getting help Date: Monday, June 30, 2008, 6:46 AM A very convenient material which can be used to line walls, and ceilings is the Laminated Microwave Absorber http://www.lessemf. com/fabric. html#259 Absorber installation is much simpler than for a reflector as you don't have such a big concern about leakage points. Just cover a large area (maybe 75-90% of the surface). Emil Re: getting help > > In a message dated 6/27/2008 6:08:04 P.M. GMT Daylight Time, > loni326 (DOT) com writes: > > Using a layer of RF absorber, on the inide of the shield, can elimated >> this phenomenon. So you end up with the best of both worlds: lower >> readings on the meter because less radiation is coming in, plus any >> tiny bit that does leak in gets absorbed by something other than your >> body. >> >> Emil >> > > > > Emil can you suggest a specification here please ? > UK > > > > > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted June 30, 2008 Report Share Posted June 30, 2008 You can use it on either side of the wall, but it will not stand up to weather. Emil ++++++++ Could you use that on the outside walls? And then the waves would be absorbed rather than be repelled. But..... would some still get through because it is absorbing them? Loni A very convenient material which can be used to line walls, and ceilings is the Laminated Microwave Absorber http://www.lessemf. com/fabric. html#259 Absorber installation is much simpler than for a reflector as you don't have such a big concern about leakage points. Just cover a large area (maybe 75-90% of the surface). Emil Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.