Guest guest Posted May 11, 1999 Report Share Posted May 11, 1999 :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: Y2K CONCERNS OVER CHEMICAL PLANTS Date: 990511 From: http://www.nj.com/news/times/ By Rich Staff Writer, The Times, 05/10/99 Trenton -- Could year 2000 technology failures lead to the release of toxic substances from chemical plants? That's the question the U.S. Senate's special committee on the year 2000 problem wants to answer today as it tours a Burlington County factory and holds a hearing at the State House. The state's chemical industry says it will be ready for the Y2K computer date-recognition problem, and there's little chance of any accidents that might pose a risk to the public. But environmental activists say the risks that remain are " perilous, " and are calling on state regulators to verify the industry's claims of compliance. U.S. Sen. , R-Utah, and the staff of the Senate committee want to know if enough is being done to safeguard the public from a variety of potential Y2K problems, including everything from power failures to interruption of government benefit programs. Chemical companies use date-sensitive technology in automation systems that control the flow of chemicals throughout their facilities. These microprocessors, known as " embedded systems, " also guide safety systems. Many use a two-digit date storage format that may not properly recognize " 00 " as the year 2000. New Jersey was chosen for the Senate hearing because it has one of the largest chemical industries in the country, with more than 800 plants employing nearly 100,000 workers. There are 172 facilities handling potentially toxic materials in Mercer and Burlington counties -- including 33 in the city of Trenton -- and in Bucks County, Pa., . and his staff will tour the Sybron Chemical Inc. facility in Pemberton Township this morning, with the State House hearing scheduled to begin at noon. One of the witnesses will be Dr. Gerald Poje of the U.S. Chemical Safety and Hazard Investigation Board. In a report on Y2K risks for the chemical industry, Poje found that large chemical and pharmaceutical companies " are unlikely to experience catastrophic failures. " But the readiness of smaller players is unclear. " One theme all experts agree on is that failure from Y2K noncompliance at small and mid-sized enterprises is more likely, " the report found. " The reason is a general lack of awareness, lack of resources and technical know-how for fixing the problems. . . . In the little time left, there is very little chance of changing that reality. " Assumptions that smaller chemical firms are unprepared for Y2K are not accurate, said Hal Bozarth of the Chemical Industry Council of New Jersey. " Everyone knows duPont, but they may not know the Hal Bozarth Chemical Co., " he said. " That doesn't mean the Hal Bozarth Chemical Co. isn't on top of the issue. It just means people are not as familiar with them. " The chemical process industry was one of the leaders in incorporating technology into its manufacturing systems, " Bozarth added. " We think that because of the technical expertise in the industry, (Y2K) will be a relatively low concern for us. I think New Jersey's chemical companies are ready to meet the challenge. " Jane Nogaki of the New Jersey Work Environment Council had a different perspective, noting that industry expertise hasn't prevented 8,247 reported releases of " extremely hazardous " substances reported to the state since 1986. " It is our contention that despite corporate and government efforts to identify and remedy Y2K problems, the situation in New Jersey remains perilous for workers and residents alike, " said Nogaki. " Despite assurances, no one knows how many glitches may occur when the clock strikes midnight. The results could include catastrophic chemical releases putting thousands of workers and citizens at risk and damaging the environment. " The potential for an accident is there, but it's a very preventable thing if the companies do a thorough examination of their processes, " she added. " The problem is that there isn't an accounting of how mid-sized and small companies are doing. It's largely an unknown risk at this time because there really isn't any way of assessing their readiness, and no one at the state level has really tried. " Nogaki's advice to the Senate committee is " not to overreact to potential dangers, but not to underreact, either. " She called on the state Department of Environmental Protection to take steps to independently verify the compliance claims of chemical manufacturers. One area where Nogaki and Bozarth agree is that the chemical industry will be affected by the Y2K readiness -- or lack thereof -- of other significant players. " One of our biggest concerns is whether our friends in the monopoly utility industry will be able to keep the power on, " said Bozarth. " That's a real concern for us. It's not the chemical companies or pharmaceutical companies you need to worry about. It's the utilities who are not used to the scrutiny. " A recent report by the North American Electric Reliability Council, an industry group, said nearly three quarters of all electric utilities will complete their year 2000 projects by June 30. Some industry critics say that assessment is optimistic. Nogaki said chemical firms need to work with suppliers as well as with local emergency management officials in developing contingency plans. " There will be additional pressure on emergency management teams to respond to Y2K incidents, " said Nogaki, a member of the Burlington County Local Emergency Planning Committee. " The Y2K issues are multifaceted, although the chemical one has the most potential for danger. New Jersey firms face a June 21 deadline to file a Risk Management Plan with the federal Environmental Protection Agency. " Their risk management plan requires them to determine their worst-case scenario and how they would go about handling it, " Nogaki said. © 1998 The Times :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.