Guest guest Posted June 18, 2006 Report Share Posted June 18, 2006 Hi all here is a cheaper device easy to make... / Apprentice Godzilla-- It's a simple germkiller being tested on numerous conditions. You are free to make one very easily for only the cost of a battery and a piece of wire. For a photo, click here: / To build it: 1. strip all 4 wire ends, 2. wrap cloth on two of them, 3. connect other 2 to the battery. 4. Wet the cloth with water. To apply to a local infection: 5. Apply across the area of virus or other germ so the current travels through the area affected. (it will travel in a more-or- less strainght line between the wires) 6. After 10 minutes, reverse the positions, and go another 10 minutes. 7. Shift positions slightly to avoid constant contact with same area of skin 8. Do this for 20 minutes to an hour, depending on how severe the infection is. 9. Don't exceed 2 hours in one session 10. Wait 12-24 hours and repeat if necessary, usually it is not needed more than once You can make several sets of wires and attach them all to the battery just like the first set. It will work the same for a whole group of people using just one battery. This could be useful in villages, or clinics where supplies are short. It uses so little power, the battery should last almost indefinitely, even with 12 or more people using it at once. The amount of power used is so small as to hardly be felt. It is not likely to be dangerous if used this way. I am not making claims for it of safety or effectiveness, but you can easily find this out yourself. Hope that helps, http://www.duncans-travel.co.uk/ BE HAPPY http://www.newhopecentre.co.uk/home.php http://www.regenerativenutrition.com/ http://www.serrapeptase.info/ http://www.rain-tree.com/graviola.htm http://www.stem-cells.com/ http://www.duncans-travel.co.uk/ > > > > Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.