Jump to content
RemedySpot.com

Re: having trouble getting enough blood

Rate this topic


Recommended Posts

Guest guest
Posted

Hi Ted,

Most lancing devices (the device you use to prick your finger) will have a

depth adjustment where you can adjust how deep it punctures your finger. If

this is on a low setting you may want to turn it higher and see if that

helps. Typically there is a dial near the end of the pen where the lancet

pokes out which you can turn to adjust depth. Also, " milking " your finger by

squeezing it several times with your fist to get the blood flowing can help.

Make sure your hands are warm, as it's harder to get blood from cold

fingers.

Jen

Guest guest
Posted

Hi Ted,

Most lancing devices (the device you use to prick your finger) will have a

depth adjustment where you can adjust how deep it punctures your finger. If

this is on a low setting you may want to turn it higher and see if that

helps. Typically there is a dial near the end of the pen where the lancet

pokes out which you can turn to adjust depth. Also, " milking " your finger by

squeezing it several times with your fist to get the blood flowing can help.

Make sure your hands are warm, as it's harder to get blood from cold

fingers.

Jen

Guest guest
Posted

Hello Ted,

This a comman problem for totally blind folks. Do as suggest and

also make sure your finer is warm befor sticking it. As that is often part

of problem.

having trouble getting enough blood

Hi all. It appears that I am having trouble getting enough blood to do my

glucose testing. I am using the Oracle which is apparently a newer machine.

i don't know if there is a problem with the machine or if I am doing

something wrong in sticking my finger. I am hitting the side of my finger

like the instructions suggest, but I have to do it several times to get

blood. I am making my fingers sore doing this. I have pricked my finger

and it will hurt, but no blood or not enough to do the trick. Can anyone

offer any advice? Could my machine be bad, and if so, how do I tell? Many

thanks for any ideas.

Ted

Guest guest
Posted

Hello Ted,

This a comman problem for totally blind folks. Do as suggest and

also make sure your finer is warm befor sticking it. As that is often part

of problem.

having trouble getting enough blood

Hi all. It appears that I am having trouble getting enough blood to do my

glucose testing. I am using the Oracle which is apparently a newer machine.

i don't know if there is a problem with the machine or if I am doing

something wrong in sticking my finger. I am hitting the side of my finger

like the instructions suggest, but I have to do it several times to get

blood. I am making my fingers sore doing this. I have pricked my finger

and it will hurt, but no blood or not enough to do the trick. Can anyone

offer any advice? Could my machine be bad, and if so, how do I tell? Many

thanks for any ideas.

Ted

Guest guest
Posted

I DON't use the sideOF the finger, I use the tip OR the pad where there is a

little MORE skin because I was having that PROBLEM TOO, and it WORKS a LOT

BETTER, but if YOU make sure YOU run YOUR finger ALONG the end OF the strip that

sticks OUT OF The machine, YOU SHOULD get a GOOD reading.

I HOPE that will help YOU in SOME way. I use the ORICAL TOO.

Terrie with Jade and Bunny

having trouble getting enough blood

Hi all. It appears that I am having trouble getting enough blood to do my

glucose testing. I am using the Oracle which is apparently a newer machine.

i don't know if there is a problem with the machine or if I am doing

something wrong in sticking my finger. I am hitting the side of my finger

like the instructions suggest, but I have to do it several times to get

blood. I am making my fingers sore doing this. I have pricked my finger

and it will hurt, but no blood or not enough to do the trick. Can anyone

offer any advice? Could my machine be bad, and if so, how do I tell? Many

thanks for any ideas.

Ted

Guest guest
Posted

Thanks Terry. Since you use the oracle, I am glad you wrote me. Am I

correct that the place to put the blood is the very end of the strip? Next,

will the oracle give you any past readings with speech. Thanks

Ted

From: blind-diabetics

[mailto:blind-diabetics ] On Behalf Of Terrie

Sent: May 9, 2010 5:09 PM

To: blind-diabetics

Subject: Re: having trouble getting enough blood

I DON't use the sideOF the finger, I use the tip OR the pad where there is a

little MORE skin because I was having that PROBLEM TOO, and it WORKS a LOT

BETTER, but if YOU make sure YOU run YOUR finger ALONG the end OF the strip

that sticks OUT OF The machine, YOU SHOULD get a GOOD reading.

I HOPE that will help YOU in SOME way. I use the ORICAL TOO.

Terrie with Jade and Bunny

having trouble getting enough blood

Hi all. It appears that I am having trouble getting enough blood to do my

glucose testing. I am using the Oracle which is apparently a newer machine.

i don't know if there is a problem with the machine or if I am doing

something wrong in sticking my finger. I am hitting the side of my finger

like the instructions suggest, but I have to do it several times to get

blood. I am making my fingers sore doing this. I have pricked my finger

and it will hurt, but no blood or not enough to do the trick. Can anyone

offer any advice? Could my machine be bad, and if so, how do I tell? Many

thanks for any ideas.

Ted

Guest guest
Posted

Thanks Terry. Since you use the oracle, I am glad you wrote me. Am I

correct that the place to put the blood is the very end of the strip? Next,

will the oracle give you any past readings with speech. Thanks

Ted

From: blind-diabetics

[mailto:blind-diabetics ] On Behalf Of Terrie

Sent: May 9, 2010 5:09 PM

To: blind-diabetics

Subject: Re: having trouble getting enough blood

I DON't use the sideOF the finger, I use the tip OR the pad where there is a

little MORE skin because I was having that PROBLEM TOO, and it WORKS a LOT

BETTER, but if YOU make sure YOU run YOUR finger ALONG the end OF the strip

that sticks OUT OF The machine, YOU SHOULD get a GOOD reading.

I HOPE that will help YOU in SOME way. I use the ORICAL TOO.

Terrie with Jade and Bunny

having trouble getting enough blood

Hi all. It appears that I am having trouble getting enough blood to do my

glucose testing. I am using the Oracle which is apparently a newer machine.

i don't know if there is a problem with the machine or if I am doing

something wrong in sticking my finger. I am hitting the side of my finger

like the instructions suggest, but I have to do it several times to get

blood. I am making my fingers sore doing this. I have pricked my finger

and it will hurt, but no blood or not enough to do the trick. Can anyone

offer any advice? Could my machine be bad, and if so, how do I tell? Many

thanks for any ideas.

Ted

Guest guest
Posted

Thanks Terry. Since you use the oracle, I am glad you wrote me. Am I

correct that the place to put the blood is the very end of the strip? Next,

will the oracle give you any past readings with speech. Thanks

Ted

From: blind-diabetics

[mailto:blind-diabetics ] On Behalf Of Terrie

Sent: May 9, 2010 5:09 PM

To: blind-diabetics

Subject: Re: having trouble getting enough blood

I DON't use the sideOF the finger, I use the tip OR the pad where there is a

little MORE skin because I was having that PROBLEM TOO, and it WORKS a LOT

BETTER, but if YOU make sure YOU run YOUR finger ALONG the end OF the strip

that sticks OUT OF The machine, YOU SHOULD get a GOOD reading.

I HOPE that will help YOU in SOME way. I use the ORICAL TOO.

Terrie with Jade and Bunny

having trouble getting enough blood

Hi all. It appears that I am having trouble getting enough blood to do my

glucose testing. I am using the Oracle which is apparently a newer machine.

i don't know if there is a problem with the machine or if I am doing

something wrong in sticking my finger. I am hitting the side of my finger

like the instructions suggest, but I have to do it several times to get

blood. I am making my fingers sore doing this. I have pricked my finger

and it will hurt, but no blood or not enough to do the trick. Can anyone

offer any advice? Could my machine be bad, and if so, how do I tell? Many

thanks for any ideas.

Ted

Guest guest
Posted

Hi Ted

I think this must be a pretty common problem. I have been diabetic for nine

years now and have this problem still. And I doubt if it's your machine. I

am on my third glucometer since being diagnosed, and I have had this problem

all along. I've used an Accu-Chek, the original Prodigy talking Meter, and

now the Prodigy Voice. I run warm to hot water over my hands and wash them

for a few minutes before testing. I also shake my hands and rub them

together for a minute before testing. I still seem to have trouble getting

blood to my fingertips. I usually waste more than one test strip before

finally getting a reading I figure is accurate. Even though the Prodigy

Voice instructions say you have up to three minutes to get blood on the

strip, I find that if I don't get a reading within 10 seconds, the reading I

do get is low, so I have to waste another strip and try again.

So, I am also interested in hearing techniques from those of you who don't

have this problem. I've tried all tips I've heard before, and most of the

time I still need several pricks with the lancet device and more than one

test strip to do the job. I would test more than twice a day, the minimum

my doctor wants me to check, if I didn't have so much trouble.

Becky

_____

From: blind-diabetics

[mailto:blind-diabetics ] On Behalf Of Ted

Sent: Sunday, May 09, 2010 4:44 PM

To: blind-diabetics

Subject: having trouble getting enough blood

Hi all. It appears that I am having trouble getting enough blood to do my

glucose testing. I am using the Oracle which is apparently a newer machine.

i don't know if there is a problem with the machine or if I am doing

something wrong in sticking my finger. I am hitting the side of my finger

like the instructions suggest, but I have to do it several times to get

blood. I am making my fingers sore doing this. I have pricked my finger

and it will hurt, but no blood or not enough to do the trick. Can anyone

offer any advice? Could my machine be bad, and if so, how do I tell? Many

thanks for any ideas.

Ted

Guest guest
Posted

Hi Ted

I think this must be a pretty common problem. I have been diabetic for nine

years now and have this problem still. And I doubt if it's your machine. I

am on my third glucometer since being diagnosed, and I have had this problem

all along. I've used an Accu-Chek, the original Prodigy talking Meter, and

now the Prodigy Voice. I run warm to hot water over my hands and wash them

for a few minutes before testing. I also shake my hands and rub them

together for a minute before testing. I still seem to have trouble getting

blood to my fingertips. I usually waste more than one test strip before

finally getting a reading I figure is accurate. Even though the Prodigy

Voice instructions say you have up to three minutes to get blood on the

strip, I find that if I don't get a reading within 10 seconds, the reading I

do get is low, so I have to waste another strip and try again.

So, I am also interested in hearing techniques from those of you who don't

have this problem. I've tried all tips I've heard before, and most of the

time I still need several pricks with the lancet device and more than one

test strip to do the job. I would test more than twice a day, the minimum

my doctor wants me to check, if I didn't have so much trouble.

Becky

_____

From: blind-diabetics

[mailto:blind-diabetics ] On Behalf Of Ted

Sent: Sunday, May 09, 2010 4:44 PM

To: blind-diabetics

Subject: having trouble getting enough blood

Hi all. It appears that I am having trouble getting enough blood to do my

glucose testing. I am using the Oracle which is apparently a newer machine.

i don't know if there is a problem with the machine or if I am doing

something wrong in sticking my finger. I am hitting the side of my finger

like the instructions suggest, but I have to do it several times to get

blood. I am making my fingers sore doing this. I have pricked my finger

and it will hurt, but no blood or not enough to do the trick. Can anyone

offer any advice? Could my machine be bad, and if so, how do I tell? Many

thanks for any ideas.

Ted

Guest guest
Posted

There are various exercises to make sure that the blood is flowing such as

moving your hand and fingers to improve circulation. Make sure you have been

drinking plenty of water before you test as this can impact the amount of

blood flowing. Swabbing your finger with alcohol will make the vein stand

out so it is easier to draw from. hope this helps.

Chuck

having trouble getting enough blood

> Hi all. It appears that I am having trouble getting enough blood to do my

> glucose testing. I am using the Oracle which is apparently a newer

> machine.

> i don't know if there is a problem with the machine or if I am doing

> something wrong in sticking my finger. I am hitting the side of my finger

> like the instructions suggest, but I have to do it several times to get

> blood. I am making my fingers sore doing this. I have pricked my finger

> and it will hurt, but no blood or not enough to do the trick. Can anyone

> offer any advice? Could my machine be bad, and if so, how do I tell?

> Many

> thanks for any ideas.

>

>

>

> Ted

>

>

>

>

Guest guest
Posted

There are various exercises to make sure that the blood is flowing such as

moving your hand and fingers to improve circulation. Make sure you have been

drinking plenty of water before you test as this can impact the amount of

blood flowing. Swabbing your finger with alcohol will make the vein stand

out so it is easier to draw from. hope this helps.

Chuck

having trouble getting enough blood

> Hi all. It appears that I am having trouble getting enough blood to do my

> glucose testing. I am using the Oracle which is apparently a newer

> machine.

> i don't know if there is a problem with the machine or if I am doing

> something wrong in sticking my finger. I am hitting the side of my finger

> like the instructions suggest, but I have to do it several times to get

> blood. I am making my fingers sore doing this. I have pricked my finger

> and it will hurt, but no blood or not enough to do the trick. Can anyone

> offer any advice? Could my machine be bad, and if so, how do I tell?

> Many

> thanks for any ideas.

>

>

>

> Ted

>

>

>

>

Guest guest
Posted

let warm water from the tap run over your finger first, then put a rubber band

around the end of your finger to encourage blood about one inch up on the

finger. then prick the finger. hope this works better for you, always do the

side of the finger and not the pad. karen

having trouble getting enough blood

Hi all. It appears that I am having trouble getting enough blood to do my

glucose testing. I am using the Oracle which is apparently a newer machine.

i don't know if there is a problem with the machine or if I am doing

something wrong in sticking my finger. I am hitting the side of my finger

like the instructions suggest, but I have to do it several times to get

blood. I am making my fingers sore doing this. I have pricked my finger

and it will hurt, but no blood or not enough to do the trick. Can anyone

offer any advice? Could my machine be bad, and if so, how do I tell? Many

thanks for any ideas.

Ted

Guest guest
Posted

let warm water from the tap run over your finger first, then put a rubber band

around the end of your finger to encourage blood about one inch up on the

finger. then prick the finger. hope this works better for you, always do the

side of the finger and not the pad. karen

having trouble getting enough blood

Hi all. It appears that I am having trouble getting enough blood to do my

glucose testing. I am using the Oracle which is apparently a newer machine.

i don't know if there is a problem with the machine or if I am doing

something wrong in sticking my finger. I am hitting the side of my finger

like the instructions suggest, but I have to do it several times to get

blood. I am making my fingers sore doing this. I have pricked my finger

and it will hurt, but no blood or not enough to do the trick. Can anyone

offer any advice? Could my machine be bad, and if so, how do I tell? Many

thanks for any ideas.

Ted

Guest guest
Posted

Lots of potentially helpful advice from others. I'll add, even when you think

you've mastered this part of checking your bg, you'll have trouble from time to

time. Stick with it, work on finding the fingers, and the areas on those

fingers, that work best. It might be the side, it might not be. My sighted wife

or son assist me a few times a day, but when I'm on my own, I generally prick

fingers on my left hand because I can then use my right hand to squeeze, or

milk, the finger I've pricked. I am right handed and I can squeeze harder doing

it this way. And I do have a couple " favorite " fingers that have a higher

percentage chance of bleeding better, and I will reserve them for the parts of

the day I am by myself.

Dave

Visit: http://www.bardtalk.com and find answers to commonly asked questions

concerning BARD. Join the online discussion list, and discover many other

resources to help make your digital talking book experience more enjoyable!

having trouble getting enough blood

Hi all. It appears that I am having trouble getting enough blood to do my

glucose testing. I am using the Oracle which is apparently a newer machine.

i don't know if there is a problem with the machine or if I am doing

something wrong in sticking my finger. I am hitting the side of my finger

like the instructions suggest, but I have to do it several times to get

blood. I am making my fingers sore doing this. I have pricked my finger

and it will hurt, but no blood or not enough to do the trick. Can anyone

offer any advice? Could my machine be bad, and if so, how do I tell? Many

thanks for any ideas.

Ted

Guest guest
Posted

Lots of potentially helpful advice from others. I'll add, even when you think

you've mastered this part of checking your bg, you'll have trouble from time to

time. Stick with it, work on finding the fingers, and the areas on those

fingers, that work best. It might be the side, it might not be. My sighted wife

or son assist me a few times a day, but when I'm on my own, I generally prick

fingers on my left hand because I can then use my right hand to squeeze, or

milk, the finger I've pricked. I am right handed and I can squeeze harder doing

it this way. And I do have a couple " favorite " fingers that have a higher

percentage chance of bleeding better, and I will reserve them for the parts of

the day I am by myself.

Dave

Visit: http://www.bardtalk.com and find answers to commonly asked questions

concerning BARD. Join the online discussion list, and discover many other

resources to help make your digital talking book experience more enjoyable!

having trouble getting enough blood

Hi all. It appears that I am having trouble getting enough blood to do my

glucose testing. I am using the Oracle which is apparently a newer machine.

i don't know if there is a problem with the machine or if I am doing

something wrong in sticking my finger. I am hitting the side of my finger

like the instructions suggest, but I have to do it several times to get

blood. I am making my fingers sore doing this. I have pricked my finger

and it will hurt, but no blood or not enough to do the trick. Can anyone

offer any advice? Could my machine be bad, and if so, how do I tell? Many

thanks for any ideas.

Ted

Guest guest
Posted

I sometimes get that problem, and when that happens, I just take the sticker, or

lancet...to be correct..LOL

and prick my finger myself

sugar

'The will of God will never take you where the Grace of God will not keep you

~Sugar

having trouble getting enough blood

Hi all. It appears that I am having trouble getting enough blood to do my

glucose testing. I am using the Oracle which is apparently a newer machine.

i don't know if there is a problem with the machine or if I am doing

something wrong in sticking my finger. I am hitting the side of my finger

like the instructions suggest, but I have to do it several times to get

blood. I am making my fingers sore doing this. I have pricked my finger

and it will hurt, but no blood or not enough to do the trick. Can anyone

offer any advice? Could my machine be bad, and if so, how do I tell? Many

thanks for any ideas.

Ted

Guest guest
Posted

I sometimes get that problem, and when that happens, I just take the sticker, or

lancet...to be correct..LOL

and prick my finger myself

sugar

'The will of God will never take you where the Grace of God will not keep you

~Sugar

having trouble getting enough blood

Hi all. It appears that I am having trouble getting enough blood to do my

glucose testing. I am using the Oracle which is apparently a newer machine.

i don't know if there is a problem with the machine or if I am doing

something wrong in sticking my finger. I am hitting the side of my finger

like the instructions suggest, but I have to do it several times to get

blood. I am making my fingers sore doing this. I have pricked my finger

and it will hurt, but no blood or not enough to do the trick. Can anyone

offer any advice? Could my machine be bad, and if so, how do I tell? Many

thanks for any ideas.

Ted

Guest guest
Posted

...and if your hands are ice cold, like mine are all the time, I run my hand

underneath warm water

HTH

sugar

'The will of God will never take you where the Grace of God will not keep you

~Sugar

having trouble getting enough blood

> Hi all. It appears that I am having trouble getting enough blood to do my

> glucose testing. I am using the Oracle which is apparently a newer

> machine.

> i don't know if there is a problem with the machine or if I am doing

> something wrong in sticking my finger. I am hitting the side of my finger

> like the instructions suggest, but I have to do it several times to get

> blood. I am making my fingers sore doing this. I have pricked my finger

> and it will hurt, but no blood or not enough to do the trick. Can anyone

> offer any advice? Could my machine be bad, and if so, how do I tell?

> Many

> thanks for any ideas.

>

>

>

> Ted

>

>

>

>

Guest guest
Posted

...and if your hands are ice cold, like mine are all the time, I run my hand

underneath warm water

HTH

sugar

'The will of God will never take you where the Grace of God will not keep you

~Sugar

having trouble getting enough blood

> Hi all. It appears that I am having trouble getting enough blood to do my

> glucose testing. I am using the Oracle which is apparently a newer

> machine.

> i don't know if there is a problem with the machine or if I am doing

> something wrong in sticking my finger. I am hitting the side of my finger

> like the instructions suggest, but I have to do it several times to get

> blood. I am making my fingers sore doing this. I have pricked my finger

> and it will hurt, but no blood or not enough to do the trick. Can anyone

> offer any advice? Could my machine be bad, and if so, how do I tell?

> Many

> thanks for any ideas.

>

>

>

> Ted

>

>

>

>

Guest guest
Posted

uu I don't go for the rubber band, but that would surely work, yiikes

sugar

'The will of God will never take you where the Grace of God will not keep you

~Sugar

having trouble getting enough blood

Hi all. It appears that I am having trouble getting enough blood to do my

glucose testing. I am using the Oracle which is apparently a newer machine.

i don't know if there is a problem with the machine or if I am doing

something wrong in sticking my finger. I am hitting the side of my finger

like the instructions suggest, but I have to do it several times to get

blood. I am making my fingers sore doing this. I have pricked my finger

and it will hurt, but no blood or not enough to do the trick. Can anyone

offer any advice? Could my machine be bad, and if so, how do I tell? Many

thanks for any ideas.

Ted

Guest guest
Posted

uu I don't go for the rubber band, but that would surely work, yiikes

sugar

'The will of God will never take you where the Grace of God will not keep you

~Sugar

having trouble getting enough blood

Hi all. It appears that I am having trouble getting enough blood to do my

glucose testing. I am using the Oracle which is apparently a newer machine.

i don't know if there is a problem with the machine or if I am doing

something wrong in sticking my finger. I am hitting the side of my finger

like the instructions suggest, but I have to do it several times to get

blood. I am making my fingers sore doing this. I have pricked my finger

and it will hurt, but no blood or not enough to do the trick. Can anyone

offer any advice? Could my machine be bad, and if so, how do I tell? Many

thanks for any ideas.

Ted

Guest guest
Posted

do you put the rubber band at the end of the finger or up further above

where you are going to stick yourself?

From: blind-diabetics

[mailto:blind-diabetics ] On Behalf Of K

Sent: May 9, 2010 5:34 PM

To: blind-diabetics

Subject: Re: having trouble getting enough blood

let warm water from the tap run over your finger first, then put a rubber

band around the end of your finger to encourage blood about one inch up on

the finger. then prick the finger. hope this works better for you, always do

the side of the finger and not the pad. karen

having trouble getting enough blood

Hi all. It appears that I am having trouble getting enough blood to do my

glucose testing. I am using the Oracle which is apparently a newer machine.

i don't know if there is a problem with the machine or if I am doing

something wrong in sticking my finger. I am hitting the side of my finger

like the instructions suggest, but I have to do it several times to get

blood. I am making my fingers sore doing this. I have pricked my finger

and it will hurt, but no blood or not enough to do the trick. Can anyone

offer any advice? Could my machine be bad, and if so, how do I tell? Many

thanks for any ideas.

Ted

Guest guest
Posted

do you put the rubber band at the end of the finger or up further above

where you are going to stick yourself?

From: blind-diabetics

[mailto:blind-diabetics ] On Behalf Of K

Sent: May 9, 2010 5:34 PM

To: blind-diabetics

Subject: Re: having trouble getting enough blood

let warm water from the tap run over your finger first, then put a rubber

band around the end of your finger to encourage blood about one inch up on

the finger. then prick the finger. hope this works better for you, always do

the side of the finger and not the pad. karen

having trouble getting enough blood

Hi all. It appears that I am having trouble getting enough blood to do my

glucose testing. I am using the Oracle which is apparently a newer machine.

i don't know if there is a problem with the machine or if I am doing

something wrong in sticking my finger. I am hitting the side of my finger

like the instructions suggest, but I have to do it several times to get

blood. I am making my fingers sore doing this. I have pricked my finger

and it will hurt, but no blood or not enough to do the trick. Can anyone

offer any advice? Could my machine be bad, and if so, how do I tell? Many

thanks for any ideas.

Ted

Guest guest
Posted

well, I am glad I am not alone in this. A lot of this is still new to me,

and what better place to come to for advice than a bunch of blind diabetics

who have been doing it longer than I have. Thanks all for the suggestions

and ideas.

From: blind-diabetics

[mailto:blind-diabetics ] On Behalf Of Becky

Sent: May 9, 2010 5:24 PM

To: blind-diabetics

Subject: RE: having trouble getting enough blood

Hi Ted

I think this must be a pretty common problem. I have been diabetic for nine

years now and have this problem still. And I doubt if it's your machine. I

am on my third glucometer since being diagnosed, and I have had this problem

all along. I've used an Accu-Chek, the original Prodigy talking Meter, and

now the Prodigy Voice. I run warm to hot water over my hands and wash them

for a few minutes before testing. I also shake my hands and rub them

together for a minute before testing. I still seem to have trouble getting

blood to my fingertips. I usually waste more than one test strip before

finally getting a reading I figure is accurate. Even though the Prodigy

Voice instructions say you have up to three minutes to get blood on the

strip, I find that if I don't get a reading within 10 seconds, the reading I

do get is low, so I have to waste another strip and try again.

So, I am also interested in hearing techniques from those of you who don't

have this problem. I've tried all tips I've heard before, and most of the

time I still need several pricks with the lancet device and more than one

test strip to do the job. I would test more than twice a day, the minimum

my doctor wants me to check, if I didn't have so much trouble.

Becky

_____

From: blind-diabetics

<mailto:blind-diabetics%40yahoogroups.com>

[mailto:blind-diabetics

<mailto:blind-diabetics%40yahoogroups.com> ] On Behalf Of Ted

Sent: Sunday, May 09, 2010 4:44 PM

To: blind-diabetics

<mailto:blind-diabetics%40yahoogroups.com>

Subject: having trouble getting enough blood

Hi all. It appears that I am having trouble getting enough blood to do my

glucose testing. I am using the Oracle which is apparently a newer machine.

i don't know if there is a problem with the machine or if I am doing

something wrong in sticking my finger. I am hitting the side of my finger

like the instructions suggest, but I have to do it several times to get

blood. I am making my fingers sore doing this. I have pricked my finger

and it will hurt, but no blood or not enough to do the trick. Can anyone

offer any advice? Could my machine be bad, and if so, how do I tell? Many

thanks for any ideas.

Ted

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...