Guest guest Posted December 12, 2006 Report Share Posted December 12, 2006 Hi Gordon: Your 95W and SWR 1:1 lacks the rest of the info. What I mean is how you arrive to it? Lamp type, length, gas mixture, amp output transistors, tuner data, etc. It will be nice to see them... Horacio Gordon wrote: > > > Just added a couple of pictures. > Shows R/B device at 95W and SWR at 1.1 > > Gordon > > > > > ------------------------------------------------------------------------ > > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.409 / Virus Database: 268.15.15/581 - Release Date: 09/12/2006 > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted December 12, 2006 Report Share Posted December 12, 2006 Horacio, Very few people are interested in tech details hence the sober message. In this group are 1944 members and you are the only one to inquire. The tube; 100% Neon at 7 Torr = 9.3 mbar, diameter 3/4 inch, length 12 " electrodes 2 x 250 mA (more mass= more electrons). Amplifier Midland 747B VM, transistors Motorola 2x mrf 255, driver CB modified Cobra Ultra, function generator, Voltcraft 6MHz sweep generator Power supply MFJ switching PS 20A In the USA the VM (variable modulator) amps are readily available. To set up any new system I always prefer the VM type amp to determine what power the tube demands. Gordon Your 95W and SWR 1:1 lacks the rest of the info. What I mean is how you arrive to it? Lamp type, length, gas mixture, amp output transistors, tuner data, etc. > > > Just added a couple of pictures. > Shows R/B device at 95W and SWR at 1.1 > > Gordon > > > > > ---------------------------------------------------------- > > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.409 / Virus Database: 268.15.15/581 - Release Date: > 09/12/2006 > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted December 12, 2006 Report Share Posted December 12, 2006 Hi, You may count on me as another group member having a technical interest – in fact more technical than medical! Your set-up looks very similar to a couple I have made – a Rife-Bare system, using a custom made 12 or 18 inch tube 20mm in diameter, either Argon-Neon mix, Argon alone or Neon alone at 7Torr; modified Uniden CB, 150 or 300watt linear amp, ATU, output via Balun, etc etc. SWRs low at 1:1.25 (about) I have found that the power output of the system is very dependent on the actual input voltage used –the watts output power seems to increase non-linearly over an increase form 12 – 14 volts – it shouldn’t but it sure measures so. So your power source must be able to handle the necessary current easily. My experience is that if your power output transistors have gone phut, then output is pathetic! Hope this helps, Andy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.