Guest guest Posted March 9, 2006 Report Share Posted March 9, 2006 Hi Bil, Most new motor bikes and some cars have red LED arrays, all assembled and ready to go, just requires a 12 volt signal. A friend of mine has used some super powerful clear white LED's in all his housing wiring, while its not as strong as the 100 watt lights, you soon get very use to it and reading fine print books at night is a snak. I think he told me he can turn on all the lights in his home, which is well illuminated, and less than a few watts of power is consumed. Now this is a good way to start looking after our environment. Regards, Ken Uzzell http://heal-me.com.au Frex - CHIamp Re[2]: Healing Light Hi Ken, The correct amount of LEDs must be in series/parallel combinations or they either won't light properly (if at all) or they'll all burn out when the volume is turned up. Speaker outputs can vary from a few volts to over 15 volts. Bil PC 1000 M-Pulse 5000 magnetic pulse generator http://magpulser.com Mammoth Lakes, CA mailto:magpulser@... KU> Hi Lee, KU> Very easy to do. Arrays of different type LED's can be obtained through most electronic shops, just hook them up to a speaker port from a stereo amplifier and play a CD with frequencies on it or KU> connect the computers sound card to the amplifier and run one of the popular software programs. KU> The LED's wont produce a square wave, you get a fast rise and fall time with a domed top. Sort of inbetween a square wave and a sine wave. Quote Link to comment Share on other sites More sharing options...
Guest guest Posted March 11, 2006 Report Share Posted March 11, 2006 You can hook up LEDs to any freq device using the proper adapter (with all the LEDs wired properly for the adapter being used). Bil PC 1000 M-Pulse 5000 magnetic pulse generator http://magpulser.com Mammoth Lakes, CA mailto:magpulser@... LD> Is there a way to hook up the LEDs to my GB4000? lee LD> >> Hi Lee, >> >> Very easy to do. Arrays of different type LED's can be obtained through most >> electronic shops, just hook them up to a speaker port from a stereo amplifier >> and play a CD with frequencies on it or connect the computers sound card to >> the amplifier and run one of the popular software programs. >> >> The LED's wont produce a square wave, you get a fast rise and fall time with a >> domed top. Sort of inbetween a square wave and a sine wave. >> >> Regards, >> Ken >> * >> >> >> >> LD> Quote Link to comment Share on other sites More sharing options...
Guest guest Posted March 11, 2006 Report Share Posted March 11, 2006 The GB4000 is capable of frying most any LED. You will need to determine the correct operating volgate and supply it. Loyd http://www.royalrife.com Re[2]: Healing Light You can hook up LEDs to any freq device using the proper adapter (with all the LEDs wired properly for the adapter being used). Bil PC 1000 M-Pulse 5000 magnetic pulse generator http://magpulser.com Mammoth Lakes, CA mailto:magpulser@... LD> Is there a way to hook up the LEDs to my GB4000? lee Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.