Re: OT: Earth Mat while coiling or rifing

[Guest guest]

I believe that the two may not work well using at the same time especially if you are treating the area with the coil near the mat .since you plug the mat into an outlet i assume it has metal or wires inside it and you are not supposed to sit on anything metal or wear any metal while coilingjanRe: OT: Earth Mat while coiling or rifing Posted by: "nancy berndt" nlberndt@... nlberndt2 Date: Sat Mar 26, 2011 12:42 pm ((PDT))Hi I don't have an answer for you but am standing with you, asking the samequestion.....you always have the best thought provoking questions!!I wonder about using the grounding pad with a Plasma non contact device likethe Perl?Be well my friend, "Im not

trying to counsel any of you to do anything really special,except to dare to think, and to dare to go with the truth ,and to dare to love completely." -R. Buckminster Fuller

[Guest guest]

re: I am just curious if anyone has tried using the earthing mat while

> > > coiling

> > > > > or would the earth's resonant frequencies interfere with the frequency

> > > that

> > > > > you are running on the Coil? Since the subject of coil machine safety

> > > was

> > > > > brought up, I wondered if it would help to use to put your feet on the

> > > > > earthing mat during rife sessions. Has anyone tried this? My GB4000

> > > runs

Hi Folks, I'm a lurker here because posting is so difficult for me. Interesting

that you are currently talking about EMFs and coiling. Here is my recent

experience. I coil for Lyme, Bart, etc. regularly but recently found a mass in

my lymph and thyroid via an MRI of my spine. While waiting to get into the doc

to find out more I decided to treat with my small coil on a cancer frequency

(2127). ( made me a small coil so I could use it for higher frequencies.)

When I tried it last night I was getting little mini zings that felt like shocks

so I turned it off immediatly. That was right after using the large coil with no

problem. This morning my husband looked it over for me and tried it on himself

with no problem so I tried it again and same thing, I got zinged only worse. He

tried it again - nothing. We see nothing wrong with the coil or the connection

or the cord. I get zapped he doesn't. Anyone have experience with this sort of

thing? Thanks for you all being there. I get so much from reading all the great

wisdom here. Ardi

[Guest guest]

Hi B,I too wondered if Earthing would interfere with rifing/coiling... I don't think so as the Coil is placed directly on the body, there is a lot of power directly aimed at that part of the body... 

EMFs coming from TVs, computers and electric in general is far less powerful and further away than the Coil , so these EMFs are easily blocked... I just don't see how Earthing could block something so powerful as a rife machine that is so close to the body... But it may help with any weaker EMFs that are generated by the device itself that would be weaker than that of the coil.. 

But still a very good question and I am in no way 100% sure of my answer... When you look at this experiment done by Wolfe, Earthing himself and then showing that EMFs literally stop hitting him, it is pretty impressive... But he is also blocking EMFs coming from a laptop which is far less powerful than a Doug Coil..

believe the way to tell is Earting while Coiling for several sessions and see if there is still a herx reaction... If so, then the coil still continues to be effective and the Earthing mat or band would also be blocking weaker EMFs coming from the machine itself plus other EMFs in the room... 

-- Take care,Jim

Re: OT: get Earthing bands or mat WAS Re: could rife machine cause c

  Message List  

Reply | Delete

Message #21800 of 21835 < Prev | Next >

OT: Earth Mat while coiling or rifing

I am just curious if anyone has tried using the earthing mat while coiling or

would the earth's resonant frequencies interfere with the frequency that you are

running on the Coil? Since the subject of coil machine safety was brought up, Iwondered if it would help to use to put your feet on the earthing mat duringrife sessions. Has anyone tried this? My GB4000 runs multiple frequencies

simultaneously, so it seems that the earthing mat would not interfere. Those ofyou that are experienced with Earthing what are your thoughts on this?

[Guest guest]

Hi Jim, and , Not being a coiler, I don't have an answer for that, but earthing hasn't made any problem with my FSCan and ABPA A2 biophotonically delivering my regular frx.Be well,LénaHi B,I too wondered if Earthing would interfere with rifing/coiling... I don't think so as the Coil is placed directly on the body, there is a lot of power directly aimed at that part of the body... EMFs coming from TVs, computers and electric in general is far less powerful and further away than the Coil , so these EMFs are easily blocked... I just don't see how Earthing could block something so powerful as a rife machine that is so close to the body... But it may help with any weaker EMFs that are generated by the device itself that would be weaker than that of the coil.. But still a very good question and I am in no way 100% sure of my answer... When you look at this experiment done by Wolfe, Earthing himself and then showing that EMFs literally stop hitting him, it is pretty impressive... But he is also blocking EMFs coming from a laptop which is far less powerful than a Doug Coil..

believe the way to tell is Earting while Coiling for several sessions and see if there is still a herx reaction... If so, then the coil still continues to be effective and the Earthing mat or band would also be blocking weaker EMFs coming from the machine itself plus other EMFs in the room... -- Take care,JimRe: OT: get Earthing bands or mat WAS Re: could rife machine cause c Message List Reply | DeleteMessage #21800 of 21835 < Prev | Next >OT: Earth Mat while coiling or rifingI am just curious if anyone has tried using the earthing mat while coiling orwould the earth's resonant frequencies interfere with the frequency that you arerunning on the Coil? Since the subject of coil machine safety was brought up, Iwondered if it would help to use to put your feet on the earthing mat duringrife sessions. Has anyone tried this? My GB4000 runs multiple frequenciessimultaneously, so it seems that the earthing mat would not interfere. Those ofyou that are experienced with Earthing what are your thoughts on this?

[Guest guest]

I agree with you Jan.. I was thinking of coiling one area, say legs and placing

the mat under the head... But if what wrote was meant the two weren't

touching, that would end Earthing and Coiling together!

Right now I have my Earthing mat on my knees, I just touched my computer and TV

and nothing... so it may be the power of the coil that may make the

difference...

Take care,

Jim

>

> I believe that the two may not work well using at the same time especially if

you are treating the area with the coil near the mat .since you plug the mat

into an outlet i assume it has metal or wires inside it and you are not supposed

to sit on anything metal or wear any metal while coiling

> jan

>

>

> Re: OT: Earth Mat while coiling or rifing

>     Posted by: " nancy berndt " nlberndt@... nlberndt2

>     Date: Sat Mar 26, 2011 12:42 pm ((PDT))

>

> Hi

> I don't have an answer for you but am standing with you, asking the same

> question.....you always have the best thought provoking questions!!

>

> I wonder about using the grounding pad with a Plasma non contact device like

> the Perl?

>

>

> Be well my friend,

>

>  

> " Im not trying to counsel any of you to do anything

> really special,except to dare to think, and to dare to go with the truth ,and

to dare to love completely. " -R. Buckminster Fuller

>

[Guest guest]

Hi Ardi,

Do you have any metal implants in your body such as a titanium hip replacement,

that might cause this? I have never heard of this happening before.

>

>

> re: I am just curious if anyone has tried using the earthing mat while

> > > > coiling

> > > > > > or would the earth's resonant frequencies interfere with the

frequency

> > > > that

> > > > > > you are running on the Coil? Since the subject of coil machine

safety

> > > > was

> > > > > > brought up, I wondered if it would help to use to put your feet on

the

> > > > > > earthing mat during rife sessions. Has anyone tried this? My GB4000

> > > > runs

>

> Hi Folks, I'm a lurker here because posting is so difficult for me.

Interesting that you are currently talking about EMFs and coiling. Here is my

recent experience. I coil for Lyme, Bart, etc. regularly but recently found a

mass in my lymph and thyroid via an MRI of my spine. While waiting to get into

the doc to find out more I decided to treat with my small coil on a cancer

frequency (2127). ( made me a small coil so I could use it for higher

frequencies.) When I tried it last night I was getting little mini zings that

felt like shocks so I turned it off immediatly. That was right after using the

large coil with no problem. This morning my husband looked it over for me and

tried it on himself with no problem so I tried it again and same thing, I got

zinged only worse. He tried it again - nothing. We see nothing wrong with the

coil or the connection or the cord. I get zapped he doesn't. Anyone have

experience with this sort of thing? Thanks for you all being there. I get so

much from reading all the great wisdom here. Ardi

>