[Rifeforum] Other Plasma Devices - Frequency Research on New High Frequency R/B devices.

[Guest guest]

Reply here: http://www.rifeforum.com/viewtopic.php?p=989#989

Posted by : Robb

It's time that I come clean now. Over the last few weeks, I have been running

various experiments, the results of which I have not been able to share with you

until now.

I have always viewed Rife/Crane machines as similar to pushing a child on a

swing.

You push the child once, watch the child swing back and forth, about 10-20

times, and then you have to push the child again. Hopefully the child does not

stop swinging in between pushes. If we could reduce this swinging from 10-20

times unassisted to maybe 5 or less swings unassisted. We would get somewhere?

In Rife Technology we are trying to get bacteria/virus to resonate

continuously.

As a result, I personally have long been fascinated with the idea of building

plasma devices that can operate above the crane frequencies which are now

currently in use. My interest peaked in this especially after " hitting the

wall " on my rife device.

After about 2-3 years, a long story involving many characters like Don

Tunney, Ben, and of course Jim Bare. Add in about 3 blown up Progens, a pile

of smoke flying through the apartment causing my lovely other half to

freak out a bit over the possible fire in the apartment!

I found myself sitting in front of a new type of Plasma device that will

actually run up to 1 MHz. (Actually it will probably go higher, but at this

time my Progen is the limiting factor!)

So, I found myself in a bit of a predicament. What 6 digit number should I

punch into the device when the only listings available are Crane frequencies?

The answer came to me in a flash from the laws of octaves. If you have a

Rife machine that can't run a particular crane frequency because it's too high

for your device, you would simply keep dividing this frequency by two until you

get a number that works in your machine. So quite obviously the opposite may

also prove to be true.

It also appears to me that throughout the electroherbalism lists, there are

quite a few frequencies that are almost always appearing. I all them major kill

frequencies. I chose 728 for my little tests on this new device. I started by

running 728 *2 *2 *2 *2 *2 *2 *2 = 93,184 Hz. While I could not feel the 728

Hz, I found that I could feel 728 Hz doing stuff on my body.

After a few days and noticing no problems with my body, I invited to

give it a try. We ran quite a few crane frequencies, without anything being

noticed. I was careful not to prompt her about what I was about to do. I

wanted to subject her to various crane frequencies to see which ones she would

respond to. I started up 728 Hz, and said she could 'feel it' a bit.

Barely perceptible. Without telling a thing, I punched in 93,184 Hz.

immediately asks " What did you do? "

I said " Why, what's up? "

She then said " I don't know what frequency you just put in, but I think you just

found a VERY effective frequency. I can feel tingling on my feet with stabbing

needle like pains. " .

I then explained what I had just done, and why. As a result, the theory of

high frequency octaves of 728Hz were just confirmed to me by .

In those days, Don's home rife machine would only go up to about 200,000 Hz. I

could run over 500,000 Hz, but, the device would seriously overheat and the tube

would bead.

Often at night when I go to sleep, for about 1.5 to two weeks, I've been running

frequencies in between 80,000 to 200,000 Hz on Don Tunney's home machine, and it

hasn't totally melted down yet.

Also, I haven't noticed any signs of desensitization, at this time, that I have

not been able to compensate for.

If I do feel desensitization, I simply change my frequency octave a few

orders higher or lower, at random.

On Friday, after a brief visit to Don Tunney's place , Ben and I had a little

work to do on my plasma device. We ended up with something that could run up

to 1 million cycles without any serious issues. We still have a few bugs to

work out, but it's quite usable.

Last night I ran...

728 *2 *2 *2 *2 *2 *2 *2 *2 *2 *2 = 745472 Hz for about 1-2 hours.

My feet were burning! Fungus being one of the hardest things to kill this

seems to be a great athlete's foot frequency. I had about 3 close friends in

the room with me, and all of them felt the effects from the device. All of them

seriously noticed a difference between the rife effect of the new plasma device

to the old one.

These results are rather preliminary and still very theoretical. I still

have not ruled out the placebo effect though.

As of now, Don Tunney is in possession of at least 3 high frequency plasma

devices for testing and a more careful and detailed research program is very

soon being done in this area.

As a result, I think Turf's list may end up growing quite a bit bigger, as I am

now *PREDICTING* that Plasma Devices will soon be readily available.

Regards,

---- Robb ----

~~~~~~~~~~~~~~~~~~~~~~~~~~~~

DO NOT REPLY VIA EMAIL

~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Replies sent by email will go to the administrator, not the original poster!

Notes:

- This New Topic Notification was sent to: Yahoogroups, Rife

- You are receiving this email because you are watching the forum: Other Plasma

Devices

- For subscription/unsubscription details, send an empty email to:

help@...

The Rife Forum Links

~~~~~~~~~~~~~~~~~~~~~~~

Main page: http://www.rifeforum.com

Membership: http://www.rifeforum.com/profile.php?mode=editprofile

Pers. Mail: http://www.rifeforum.com/privmsg.php?folder=inbox

New posts: http://www.rifeforum.com/search.php?search_id=newposts

Links page: http://www.rifeforum.com/links.php