Guest guest Posted July 16, 2004 Report Share Posted July 16, 2004 Dear , or others: If "stachy" has relatively large spores, can you provide an equivalent aerodynamic diameter, in microns, for them? Does anyone also know the particle size for aspergillis spores? Curious, W. Bearg, PE, CIH Concord, MA -------------- Original message -------------- The ability of these "sticky", relatively large (for mold) spores to be rendered airborne will also be related to the level of dessication of the colony on the substrate. Steve Temes Quote Link to comment Share on other sites More sharing options...
Guest guest Posted July 16, 2004 Report Share Posted July 16, 2004 I believe Stachy are around 3 microns… Jasson Walke Mold Tech Services, Inc www.moldtechservices.com jasson@... Re: Re: Particle sizes of mold Dear , or others: If " stachy " has relatively large spores, can you provide an equivalent aerodynamic diameter, in microns, for them? Does anyone also know the particle size for aspergillis spores? Curious, W. Bearg, PE, CIH Concord, MA -------------- Original message -------------- The ability of these " sticky " , relatively large (for mold) spores to be rendered airborne will also be related to the level of dessication of the colony on the substrate. Steve Temes FAIR USE NOTICE: This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner. We are making such material available in our efforts to advance understanding of environmental, political, human rights, economic, democracy, scientific, and social justice issues, etc. We believe this constitutes a 'fair use' of any such copyrighted material as provided for in section 107 of the US Copyright Law. In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those who have expressed a prior interest in receiving the included information for research and educational purposes. For more information go to: http://www.law.cornell.edu/uscode/17/107.shtml. If you wish to use copyrighted material from this site for purposes of your own that go beyond 'fair use', you must obtain permission from the copyright owner. Quote Link to comment Share on other sites More sharing options...
Guest guest Posted July 16, 2004 Report Share Posted July 16, 2004 : Aspergillus Flavus is 3 to 6 microns Aspergillus Fumigatus is 2 to 3.5 microns Aspergillus Niger is 3.5 to 5 microns This is another reason for the limited usefulness of particle counts, molds can vary widely in size, even within the same species, however, if the area is heavily contaminated, the particle counter numbers will go through the roof on the 5 micron channel. Of course, you have to rule out other sources like plain dust ! University of Minnesota, Dept of Environmental Health and Safety has a fungus glossary on their website that lists the size of various fungi and also the aw (water activity) level. http://www.dehs.umn.edu/iaq/fungus/glossary.html e Indoor Environmental Testing Inc. Re: Re: Particle sizes of mold Dear , or others: If "stachy" has relatively large spores, can you provide an equivalent aerodynamic diameter, in microns, for them? Does anyone also know the particle size for aspergillis spores? Curious, W. Bearg, PE, CIH Concord, MA -------------- Original message -------------- The ability of these "sticky", relatively large (for mold) spores to be rendered airborne will also be related to the level of dessication of the colony on the substrate. Steve TemesFAIR USE NOTICE:This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner. We are making such material available in our efforts to advance understanding of environmental, political, human rights, economic, democracy, scientific, and social justice issues, etc. We believe this constitutes a 'fair use' of any such copyrighted material as provided for in section 107 of the US Copyright Law. In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those who have expressed a prior interest in receiving the included information for research and educational purposes. For more information go to: http://www.law.cornell.edu/uscode/17/107.shtml. If you wish to use copyrighted material from this site for purposes of your own that go beyond 'fair use', you must obtain permission from the copyright owner. Quote Link to comment Share on other sites More sharing options...
Guest guest Posted July 19, 2004 Report Share Posted July 19, 2004 Stachy is elliptical width typically 3-5 um (my experience) length typically 8-11(my experience) but is reported at 3.7-7.5 width eliptical with 7-12.5 in length (7.5-9.5 dia globose form) As for Aspergillus, 2-6 um circular is most common, but I have seen as big as 10 um elongated A recent presentation by Kahane, et al indicated that the 3-5 um size range was most useful for remediation determination (when compared to air-O-Cell data). Tony .................................................. "Tony" Havics, CHMM, CIH, PE pH2 5450 N. Lafayette Road Indianapolis, IN 46254 Office: Fax: This message is from pH2. This message and any attachments may contain legally privileged or confidential information, and are intended only for the individual or entity identified above as the addressee. If you are not the addressee, or if this message has been addressed to you in error, you are not authorized to read, copy, or distribute this message and any attachments, and we ask that you please delete this message and attachments (including all copies) and notify the sender by return e-mail or by phone at . Delivery of this message and any attachments to any person other than the intended recipient(s) is not intended in any way to waive confidentiality or a privilege. All personal messages express views only of the sender, which are not to be attributed to pH2 and may not be copied or distributed without this statement. -----Original Message-----From: e Sent: Friday, July 16, 2004 12:18 PMTo: iequality Subject: Re: Re: Particle sizes of mold : Aspergillus Flavus is 3 to 6 microns Aspergillus Fumigatus is 2 to 3.5 microns Aspergillus Niger is 3.5 to 5 microns This is another reason for the limited usefulness of particle counts, molds can vary widely in size, even within the same species, however, if the area is heavily contaminated, the particle counter numbers will go through the roof on the 5 micron channel. Of course, you have to rule out other sources like plain dust ! University of Minnesota, Dept of Environmental Health and Safety has a fungus glossary on their website that lists the size of various fungi and also the aw (water activity) level. http://www.dehs.umn.edu/iaq/fungus/glossary.html e Indoor Environmental Testing Inc. Re: Re: Particle sizes of mold Dear , or others: If "stachy" has relatively large spores, can you provide an equivalent aerodynamic diameter, in microns, for them? Does anyone also know the particle size for aspergillis spores? Curious, W. Bearg, PE, CIH Concord, MA -------------- Original message -------------- The ability of these "sticky", relatively large (for mold) spores to be rendered airborne will also be related to the level of dessication of the colony on the substrate. Steve TemesFAIR USE NOTICE:This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner. We are making such material available in our efforts to advance understanding of environmental, political, human rights, economic, democracy, scientific, and social justice issues, etc. We believe this constitutes a 'fair use' of any such copyrighted material as provided for in section 107 of the US Copyright Law. In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those who have expressed a prior interest in receiving the included information for research and educational purposes. For more information go to: http://www.law.cornell.edu/uscode/17/107.shtml. If you wish to use copyrighted material from this site for purposes of your own that go beyond 'fair use', you must obtain permission from the copyright owner. FAIR USE NOTICE:This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner. We are making such material available in our efforts to advance understanding of environmental, political, human rights, economic, democracy, scientific, and social justice issues, etc. We believe this constitutes a 'fair use' of any such copyrighted material as provided for in section 107 of the US Copyright Law. In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those who have expressed a prior interest in receiving the included information for research and educational purposes. For more information go to: http://www.law.cornell.edu/uscode/17/107.shtml. If you wish to use copyrighted material from this site for purposes of your own that go beyond 'fair use', you must obtain permission from the copyright owner. Quote Link to comment Share on other sites More sharing options...
Guest guest Posted August 11, 2004 Report Share Posted August 11, 2004 Dear Colleagues: First let me thank everyone who has responded to my question about the size of aspergillus spores. Secondly, does anyone have any information on the weight or density of these spores? Sincerely, W. Bearg, PE, CIH Consultant in IEQ --------- Re: Re: Particle sizes of mold Dear , or others: If "stachy" has relatively large spores, can you provide an equivalent aerodynamic diameter, in microns, for them? Does anyone also know the particle size for aspergillis spores? Curious, W. Bearg, PE, CIH Concord, MA -------------- Original message -------------- The ability of these "sticky", relatively large (for mold) spores to be rendered airborne will also be related to the level of dessication of the colony on the substrate. Steve TemesFAIR USE NOTICE:This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner. We are making such material available in our efforts to advance understanding of environmental, political, human rights, economic, democracy, scientific, and social justice issues, etc. We believe this constitutes a 'fair use' of any such copyrighted material as provided for in section 107 of the US Copyright Law. In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those who have expressed a prior interest in receiving the included information for research and educational purposes. For more information go to: http://www.law.cornell.edu/uscode/17/107.shtml. If you wish to use copyrighted material from this site for purposes of your own that go beyond 'fair use', you must obtain permission from the copyright owner. FAIR USE NOTICE:This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner. We are making such material available in our efforts to advance understanding of environmental, political, human rights, economic, democracy, scientific, and social justice issues, etc. We believe this constitutes a 'fair use' of any such copyrighted material as provided for in section 107 of the US Copyright Law. In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those who have expressed a prior interest in receiving the included information for research and educational purposes. For more information go to: http://www.law.cornell.edu/uscode/17/107.shtml. If you wish to use copyrighted material from this site for purposes of your own that go beyond 'fair use', you must obtain permission from the copyright owner. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.