Guest guest Posted August 14, 2006 Report Share Posted August 14, 2006 Dear Connie, Someone maybe able to help you get your programs working on your laptop. In the meantime, if you do the recordings in BioExplorer on your desk top computer and put the data through BioReview you can transfer the text files to your laptop and do the assessments in Excel there. Rah > > First of all I appreciate all of your help as I get started with this. > I don't know what I would do without your input and suggestions. > > I've been using the BrainMaster module with BioExplorer software. I > have it set up on my desktop computer, which I have realized I can't > do assessments on because it doesn't have Excel. Quote Link to comment Share on other sites More sharing options...
Guest guest Posted August 14, 2006 Report Share Posted August 14, 2006 Lkay, Thanks Rah. Is this going to be hard for me to understand how to put the data through BioReview? > > > > First of all I appreciate all of your help as I get started with > this. > > I don't know what I would do without your input and suggestions. > > > > I've been using the BrainMaster module with BioExplorer software. I > > have it set up on my desktop computer, which I have realized I can't > > do assessments on because it doesn't have Excel. > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted August 14, 2006 Report Share Posted August 14, 2006 Well, I don't know if you will have a hard time understanding it. If you have all the files from the Brain-trainer site (including instructions) and have the recordings done already, you may open BioReview and try one. Open BioReview Report Open Navigate to the Report file (probably you saved it in BioExplorer/Reports) and open it. Maximize View 1 window Report Run on Session Navigate to the session file (probably you saved it in BioExplorer/Sessions) and open it. View Export be sure Tab is checked OK Navigate to the place where you want to save the files. Name the file. Save Pete has more detailed instructions, including creating folders and naming files. Lots of help on this list. Rah Quote Link to comment Share on other sites More sharing options...
Guest guest Posted August 14, 2006 Report Share Posted August 14, 2006 Connie~ If you follow the directions for the TLC assessment I think you should do well. You should be able to load the software onto many computers, you just cant use it on more than one computer at a time, and...you dont need to load BM software if you are going to use BE. If and when you buy a USB-serial port adapter, make sure you buy the KEYSPAN. Most others wont work with the Brainmaster.. ~ -------------- Original message -------------- Lkay, Thanks Rah. Is this going to be hard for me to understand howto put the data through BioReview?> >> > First of all I appreciate all of your help as I get started with > this.> > I don't know what I would do without your input and suggestions. > > > > ; I've been using the BrainMaster module with BioExplorer software. I> > have it set up on my desktop computer, which I have realized I can't> > do assessments on because it doesn't have Excel.> Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 19, 2006 Report Share Posted September 19, 2006 It'd a 2E and I am using bioexplorer software. While the unit is connecting is displays the "sync error" message. The channel one signal starts out very noisy and then calms down. Thank you for your reply. left/right> > >> > > Dear listmates> > >> > >> > >> > > I did what I always feared. I mixed up left and right gathering my data.> > > When I found out I corrected it only in the Midline. What can I do? > >Leave it> > > like that and look at the data as if left is right and right is left, or > >is> > > there any other way?> > >> > >> > >> > > Rob> > >> > >> > >> >> > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 19, 2006 Report Share Posted September 19, 2006 Leanne: Be sure that BRMaster is selected and checked in Devices and no competing instrument is checked, At 09:58 AM 9/19/2006, you wrote: It'd a 2E and I am using bioexplorer software. While the unit is connecting is displays the " sync error " message. The channel one signal starts out very noisy and then calms down. Thank you for your reply. left/right > > > > > > Dear listmates > > > > > > > > > > > > I did what I always feared. I mixed up left and right gathering my data. > > > When I found out I corrected it only in the Midline. What can I do? > >Leave it > > > like that and look at the data as if left is right and right is left, or > >is > > > there any other way? > > > > > > > > > > > > Rob > > > > > > > > > > > > > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 19, 2006 Report Share Posted September 19, 2006 in the bioexplorer window? > >Reply-To: braintrainer >To: braintrainer >Subject: Re: Re: brainmaster >Date: Tue, 19 Sep 2006 12:44:46 -0400 > >Leanne: Be sure that BRMaster is selected and checked in Devices and no >competing instrument is checked, > > >At 09:58 AM 9/19/2006, you wrote: > >>It'd a 2E and I am using bioexplorer software. While the unit is >>connecting is displays the " sync error " message. The channel one signal >>starts out very noisy and then calms down. Thank you for your reply. >> >> left/right >> > > > >> > > > Dear listmates >> > > > >> > > > >> > > > >> > > > I did what I always feared. I mixed up left and right gathering my >>data. >> > > > When I found out I corrected it only in the Midline. What can I do? >> > >Leave it >> > > > like that and look at the data as if left is right and right is >>left, or >> > >is >> > > > there any other way? >> > > > >> > > > >> > > > >> > > > Rob >> > > > >> > > > >> > > > >> > > >> > >> > >> > >> > >> >> > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 19, 2006 Report Share Posted September 19, 2006 Go to your Start menu and find " My Computer " RIGHT-click and cloose Properties. Select the Hardware tab at the top of the window, then click the Device Manager button. Find Ports on the list and click the + beside it. Do you find the BrainMaster listed there, or the USB adaptor? Note what port is assigned, and make sure you are using that same port in BioExplorer. Are you using a computer that has a COM port, or are you connecting your Brainmaster through a USB port? If so, what kind of adaptor are you using? The adaptor is the cable that goes between the BrainMaster cable and the USB port on your computer. In BioExplorer, go to the BioExplorer menu Select Devices. You probably have only one item on the list: the Brainmaster. If you have more than one on the list, make sure only BrainMaster is checked. Pete > > > Date: 2006/09/19 Tue PM 04:14:18 EDT > To: braintrainer > Subject: Re: Re: brainmaster > > > in the bioexplorer window? > > > > >Reply-To: braintrainer > >To: braintrainer > >Subject: Re: Re: brainmaster > >Date: Tue, 19 Sep 2006 12:44:46 -0400 > > > >Leanne: Be sure that BRMaster is selected and checked in Devices and no > >competing instrument is checked, > > > > > >At 09:58 AM 9/19/2006, you wrote: > > > >>It'd a 2E and I am using bioexplorer software. While the unit is > >>connecting is displays the " sync error " message. The channel one signal > >>starts out very noisy and then calms down. Thank you for your reply. > >> > >> left/right > >> > > > > >> > > > Dear listmates > >> > > > > >> > > > > >> > > > > >> > > > I did what I always feared. I mixed up left and right gathering my > >>data. > >> > > > When I found out I corrected it only in the Midline. What can I do? > >> > >Leave it > >> > > > like that and look at the data as if left is right and right is > >>left, or > >> > >is > >> > > > there any other way? > >> > > > > >> > > > > >> > > > > >> > > > Rob > >> > > > > >> > > > > >> > > > > >> > > > >> > > >> > > >> > > >> > > >> > >> > > > > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 19, 2006 Report Share Posted September 19, 2006 Go to your Start menu and find " My Computer " RIGHT-click and cloose Properties. Select the Hardware tab at the top of the window, then click the Device Manager button. Find Ports on the list and click the + beside it. Do you find the BrainMaster listed there, or the USB adaptor? Note what port is assigned, and make sure you are using that same port in BioExplorer. Are you using a computer that has a COM port, or are you connecting your Brainmaster through a USB port? If so, what kind of adaptor are you using? The adaptor is the cable that goes between the BrainMaster cable and the USB port on your computer. In BioExplorer, go to the BioExplorer menu Select Devices. You probably have only one item on the list: the Brainmaster. If you have more than one on the list, make sure only BrainMaster is checked. Pete > > > Date: 2006/09/19 Tue PM 04:14:18 EDT > To: braintrainer > Subject: Re: Re: brainmaster > > > in the bioexplorer window? > > > > >Reply-To: braintrainer > >To: braintrainer > >Subject: Re: Re: brainmaster > >Date: Tue, 19 Sep 2006 12:44:46 -0400 > > > >Leanne: Be sure that BRMaster is selected and checked in Devices and no > >competing instrument is checked, > > > > > >At 09:58 AM 9/19/2006, you wrote: > > > >>It'd a 2E and I am using bioexplorer software. While the unit is > >>connecting is displays the " sync error " message. The channel one signal > >>starts out very noisy and then calms down. Thank you for your reply. > >> > >> left/right > >> > > > > >> > > > Dear listmates > >> > > > > >> > > > > >> > > > > >> > > > I did what I always feared. I mixed up left and right gathering my > >>data. > >> > > > When I found out I corrected it only in the Midline. What can I do? > >> > >Leave it > >> > > > like that and look at the data as if left is right and right is > >>left, or > >> > >is > >> > > > there any other way? > >> > > > > >> > > > > >> > > > > >> > > > Rob > >> > > > > >> > > > > >> > > > > >> > > > >> > > >> > > >> > > >> > > >> > >> > > > > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 19, 2006 Report Share Posted September 19, 2006 Go to your Start menu and find " My Computer " RIGHT-click and cloose Properties. Select the Hardware tab at the top of the window, then click the Device Manager button. Find Ports on the list and click the + beside it. Do you find the BrainMaster listed there, or the USB adaptor? Note what port is assigned, and make sure you are using that same port in BioExplorer. Are you using a computer that has a COM port, or are you connecting your Brainmaster through a USB port? If so, what kind of adaptor are you using? The adaptor is the cable that goes between the BrainMaster cable and the USB port on your computer. In BioExplorer, go to the BioExplorer menu Select Devices. You probably have only one item on the list: the Brainmaster. If you have more than one on the list, make sure only BrainMaster is checked. Pete > > > Date: 2006/09/19 Tue PM 04:14:18 EDT > To: braintrainer > Subject: Re: Re: brainmaster > > > in the bioexplorer window? > > > > >Reply-To: braintrainer > >To: braintrainer > >Subject: Re: Re: brainmaster > >Date: Tue, 19 Sep 2006 12:44:46 -0400 > > > >Leanne: Be sure that BRMaster is selected and checked in Devices and no > >competing instrument is checked, > > > > > >At 09:58 AM 9/19/2006, you wrote: > > > >>It'd a 2E and I am using bioexplorer software. While the unit is > >>connecting is displays the " sync error " message. The channel one signal > >>starts out very noisy and then calms down. Thank you for your reply. > >> > >> left/right > >> > > > > >> > > > Dear listmates > >> > > > > >> > > > > >> > > > > >> > > > I did what I always feared. I mixed up left and right gathering my > >>data. > >> > > > When I found out I corrected it only in the Midline. What can I do? > >> > >Leave it > >> > > > like that and look at the data as if left is right and right is > >>left, or > >> > >is > >> > > > there any other way? > >> > > > > >> > > > > >> > > > > >> > > > Rob > >> > > > > >> > > > > >> > > > > >> > > > >> > > >> > > >> > > >> > > >> > >> > > > > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 19, 2006 Report Share Posted September 19, 2006 Thanks for your fast reply. In device manager, under ports (COM & LPT) there is only one choice in the drop down menu which is "printer port (LPT1)-that's it. My BM is connecting through a USB port and has a keyspan adaptor. In the bioexplorer program I only have one device which is BM and the box is checked. THanks again. Leanne left/right> >> > > >> >> > > > Dear listmates> >> > > >> >> > > >> >> > > >> >> > > > I did what I always feared. I mixed up left and right gathering my > >>data.> >> > > > When I found out I corrected it only in the Midline. What can I do?> >> > >Leave it> >> > > > like that and look at the data as if left is right and right is > >>left, or> >> > >is> >> > > > there any other way?> >> > > >> >> > > >> >> > > >> >> > > > Rob> >> > > >> >> > > >> >> > > >> >> > >> >> >> >> >> >> >> >> >> >>> >>> >> > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 19, 2006 Report Share Posted September 19, 2006 You might want to try typing in several other numbers and trying them out to see if you get "connected". The computer then may come up with an extra port for you to use, this has worked for me once. ~ left/right> >> > > >> >> > > > Dear listmates> >> > > >> >> > > >> >> > > >> >> > > > I did what I always feared. I mixed up left and right gathering my > >>data.> >> > > > When I found out I corrected it only in the Midline. What can I do?> >> > >Leave it> >> > > > like that and look at the data as if left is right and right is > >>left, or> >> > >is> >> > > > there any other way?> >> > > >> >> > > >> >> > > >> >> > > > Rob> >> > > >> >> > > >> >> > > >> >> > >> >> >> >> >> >> >> >> >> >>> >>> >> > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 19, 2006 Report Share Posted September 19, 2006 Hi Pete, I've tried everything and still it says syc error. At my device manager is only indicates Brain master Atlantis, no port. On Bio-explorer it is connected on port 5, with this sync error and am not able to get a clean reading. Please advise. Diane On 09/19/2006 7:04:42 PM, Van Deusen (pvdtlc@...) wrote: > Go to your Start menu and find " My Computer " > RIGHT-click and cloose Properties. > Select the Hardware tab at the top of the window, then click the Device > Manager button. > Find Ports on the list and click the + beside it. > Do you find the BrainMaster listed there, or the USB adaptor? > Note what port is assigned, and make sure you are using that same port in > BioExplorer. > > Are you using a computer that has a COM port, or are you connecting your > Brainmaster through a USB port? If so, what kind of adaptor are you > using? The adaptor is the cable that goes between the BrainMaster cable and > the USB port on your computer. > > In BioExplorer, go to the BioExplorer menu > Select Devices. > You probably have only one item on the list: the Brainmaster. > If you have more than one on the list, make sure only BrainMaster is > checked. > > Pete > > > > > From: " LEANNE ANTAYA " > > Date: 2006/09/19 Tue PM 04:14:18 EDT > > To: braintrainer > > Subject: Re: Re: brainmaster > > > > > > in the bioexplorer window? > > > > > > > >Re Dr. Diane Stoler, Ed.D. P.O. Box 148 town, MA 01833 Toll Free in US Direct Dial For information on how to obtain " Coping with Mild Traumatic Brain Injury: A Guide to Living with the Challenges Associated with Concussion/ Brain Injury " Click the link below <http:// www.drdiane.com > Neuroband: For the Professional and Home User of Neurofeedback equipment: Clink the link below http://www.drdiane.com/neuroband_order.html Confidentiality: This electronic message (E-mail) and any files attached hereto contain confidential, legally privileged and protected by copyright. If you are not the intended recipient, dissemination or copying of this E-mail is prohibited. If you have received this in error, please notify the sender by telephone or replying by E-mail to info@..., then delete the E-mail completely from your system. This E-mail and any attachments have been scanned for viruses, but it is the responsibility of the recipient to conduct their own security measures and no responsibility is accepted by Dr. Diane Stoler, Ed,D. , d/b/a -Dr. Diane and/or Lafayette Counseling Center for loss or damage from receipt or use of this E-mail. No responsibility is accepted by Dr. Diane Stoler, Ed.D., d/b/a-Dr. Diane and/or Lafayette Counseling Center for personal E-mails, or E-mails unconnected with Dr. Diane Stoler, Ed.D, patients' or client business. Dr. Diane ~ Catalyst for Change® - A neuropsychologist who works with individuals and organizations worldwide, to help them find Solutions and Resources® to overcome life’s challenges and reach their goals. Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 19, 2006 Report Share Posted September 19, 2006 At 04:14 PM 9/19/2006, you wrote: YES, SOMETIMES ANOTHER INSTRUMENT SHOWS UP. IF SO, REMOVE IT FROM THE DEVICES IN BE in the bioexplorer window? >From: Morales <nolo_320@... > >Reply-To: braintrainer >To: braintrainer >Subject: Re: Re: brainmaster >Date: Tue, 19 Sep 2006 12:44:46 -0400 > >Leanne: Be sure that BRMaster is selected and checked in Devices and no >competing instrument is checked, > > >At 09:58 AM 9/19/2006, you wrote: > >>It'd a 2E and I am using bioexplorer software. While the unit is >>connecting is displays the " sync error " message. The channel one signal >>starts out very noisy and then calms down. Thank you for your reply. >> >> left/right >> > > > >> > > > Dear listmates >> > > > >> > > > >> > > > >> > > > I did what I always feared. I mixed up left and right gathering my >>data. >> > > > When I found out I corrected it only in the Midline. What can I do? >> > >Leave it >> > > > like that and look at the data as if left is right and right is >>left, or >> > >is >> > > > there any other way? >> > > > >> > > > >> > > > >> > > > Rob >> > > > >> > > > >> > > > >> > > >> > >> > >> > >> > >> >> > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 19, 2006 Report Share Posted September 19, 2006 Thanks, . Where do I type in the numbers? Also, it does connect a few minutes after the error message but can I trust the recording? > >Reply-To: braintrainer >To: <braintrainer > >Subject: Re: Re: Re: brainmaster >Date: Tue, 19 Sep 2006 20:10:02 -0400 > >You might want to try typing in several other numbers and trying them out >to see if you get " connected " . The computer then may come up with an extra >port for you to use, this has worked for me once. >~ > left/right > > >> > > > > > >> > > > Dear listmates > > >> > > > > > >> > > > > > >> > > > > > >> > > > I did what I always feared. I mixed up left and right >gathering my > > >>data. > > >> > > > When I found out I corrected it only in the Midline. What >can I do? > > >> > >Leave it > > >> > > > like that and look at the data as if left is right and >right is > > >>left, or > > >> > >is > > >> > > > there any other way? > > >> > > > > > >> > > > > > >> > > > > > >> > > > Rob > > >> > > > > > >> > > > > > >> > > > > > >> > > > > >> > > > >> > > > >> > > > >> > > > >> > > >> > > > > > > > > > > > > > > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 19, 2006 Report Share Posted September 19, 2006 If you don't see the Keyspan listed under ports when it is plugged in and the BMer is turned on, you have not installed the drivers for the Keyspan properly. You should have gotten a disk with it. Make sure that is done, that the Keyspan is showing up under ports, that you have set the port for BrainMaster in BioExplorer to the same port number, and you should be fine. Pete > > > Date: 2006/09/19 Tue PM 07:52:50 EDT > To: <braintrainer > > Subject: Re: Re: Re: brainmaster > > Thanks for your fast reply. > In device manager, under ports (COM & LPT) there is only one choice in the drop down menu which is " printer port (LPT1)-that's it. > My BM is connecting through a USB port and has a keyspan adaptor. > In the bioexplorer program I only have one device which is BM and the box is checked. > THanks again. > Leanne > > left/right > > >> > > > > > >> > > > Dear listmates > > >> > > > > > >> > > > > > >> > > > > > >> > > > I did what I always feared. I mixed up left and right gathering my > > >>data. > > >> > > > When I found out I corrected it only in the Midline. What can I do? > > >> > >Leave it > > >> > > > like that and look at the data as if left is right and right is > > >>left, or > > >> > >is > > >> > > > there any other way? > > >> > > > > > >> > > > > > >> > > > > > >> > > > Rob > > >> > > > > > >> > > > > > >> > > > > > >> > > > > >> > > > >> > > > >> > > > >> > > > >> > > >> > > > > > > > > > > > > > > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 19, 2006 Report Share Posted September 19, 2006 Leanne~ Under ports in the drop down menu in the device manager, but ....if you are getting a "connected" then you are connected, I guess. As long as you don't see the sync error then you are OK. ~ left/right> > >> > > >> > >> > > > Dear listmates> > >> > > >> > >> > > >> > >> > > >> > >> > > > I did what I always feared. I mixed up left and right >gathering my> > >>data.> > >> > > > When I found out I corrected it only in the Midline. What >can I do?> > >> > >Leave it> > >> > > > like that and look at the data as if left is right and >right is> > >>left, or> > >> > >is> > >> > > > there any other way?> > >> > > >> > >> > > >> > >> > > >> > >> > > > Rob> > >> > > >> > >> > > >> > >> > > >> > >> > >> > >> >> > >> >> > >> >> > >> >> > >>> > >>> > >> >> >> >> >>>>>> Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 19, 2006 Report Share Posted September 19, 2006 Diane, Unfortunately the folks at Brainmaster and BioExplorer haven't yet gotten together to update the drivers for Atlantis in BioExplorer. You won't be able to use the Atlantis with anything but BrainMaster 2.5 or above software. My Atlantis also shows a constant sync error. Pete > > > Date: 2006/09/19 Tue PM 10:11:04 EDT > To: braintrainer > Subject: Re: Re: Re: brainmaster > > Hi Pete, > > I've tried everything and still it says syc > error. At my device manager is only indicates > Brain master Atlantis, no port. On Bio-explorer > it is connected on port 5, with this sync error > and am not able to get a clean reading. Please advise. > > Diane > > > On 09/19/2006 7:04:42 PM, Van Deusen (pvdtlc@...) wrote: > > Go to your Start menu and find " My Computer " > > RIGHT-click and cloose Properties. > > Select the Hardware tab at the top of the window, then click the Device > > Manager button. > > Find Ports on the list and click the + beside it. > > Do you find the BrainMaster listed there, or the USB adaptor? > > Note what port is assigned, and make sure you are using that same port in > > BioExplorer. > > > > Are you using a computer that has a COM port, or are you connecting your > > Brainmaster through a USB port? If so, what kind of adaptor are you > > using? The adaptor is the cable that goes between the BrainMaster cable and > > the USB port on your computer. > > > > In BioExplorer, go to the BioExplorer menu > > Select Devices. > > You probably have only one item on the list: the Brainmaster. > > If you have more than one on the list, make sure only BrainMaster is > > checked. > > > > Pete > > > > > > > > > > > Date: 2006/09/19 Tue PM 04:14:18 EDT > > > To: braintrainer > > > Subject: Re: Re: brainmaster > > > > > > > > > in the bioexplorer window? > > > > > > > > > > >Re > > > Dr. Diane Stoler, Ed.D. > P.O. Box 148 > town, MA 01833 > > Toll Free in US > Direct Dial > > > For information on how to obtain > > " Coping with Mild Traumatic Brain Injury: > A Guide to Living with the Challenges Associated > with Concussion/ Brain Injury " > Click the link below > <http://www.drdiane.com> > > Neuroband: For the Professional and Home User of Neurofeedback equipment: > Clink the link below > http://www.drdiane.com/neuroband_order.html > > Confidentiality: > > This electronic message (E-mail) and any files > attached hereto contain confidential, legally > privileged and protected by copyright. If you > are not the intended recipient, dissemination or > copying of this E-mail is prohibited. If you > have received this in error, please notify the > sender by telephone or replying by > E-mail to info@..., then delete the > E-mail completely from your system. > > This E-mail and any attachments have been scanned > for viruses, but it is the responsibility of the > recipient to conduct their own security measures > and no responsibility is accepted by Dr. Diane > Stoler, Ed,D. , d/b/a -Dr. Diane and/or > Lafayette Counseling Center for loss or damage > from receipt or use of this E-mail. > > No responsibility is accepted by Dr. Diane > Stoler, Ed.D., d/b/a-Dr. Diane and/or > Lafayette Counseling Center for personal E-mails, > or E-mails unconnected with Dr. Diane > Stoler, Ed.D, patients' or client business. > > <http://www.drdiane.com>Dr. Diane ~ Catalyst for > Change® - A neuropsychologist who works with > individuals and organizations worldwide, to help > them find Solutions and Resources® to overcome > life’s challenges and reach their goals. > > Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.