Re: Trying to make Freex work

[Guest guest]

Dear okiedokietoday,

Do the db leds light up to the top ?

You could try turning the computer volume up if the db LEDs aren't lighting up to the top value.

Testing output of the amplifier can be done by attaching a speaker to the output ports. You should hear the frequency stream tones on signals under 12,000 Hz

Sincerely,

Ken Uzzellhttp://heal-me.com.au

Trying to make Freex work

I have a pylepro pca4 2X120W ! It lights up when I turn the FREEX on but don't feel anything on leads coming out of the amp! Any insite ! Thanks

[Guest guest]

Hi Okiedokietoday,

The body wont usually feel frequencies much over 1,500 Hz, so also when testing the amplifier out choose a frequency like 528 Hz ... when the voltage is 10 or more volts then we should feel a slight "tingle".

Sincerely,

Ken Uzzellhttp://heal-me.com.au

Trying to make Freex work

I have a pylepro pca4 2X120W ! It lights up when I turn the FREEX on but don't feel anything on leads coming out of the amp! Any insite ! Thanks ------------------------------------

[Guest guest]

I bought new output wires and gator clips ! I registered the software. Turned it all on and kept volume very low ! The PylePro PCA4 2x120W generates a strong output as rhe volume moves up ! I could sure feel it in the 2 handholds !

Subject: Re: Trying to make Freex workTo: Rife Date: Sunday, November 27, 2011, 2:19 PM

Dear okiedokietoday,

Do the db leds light up to the top ?

You could try turning the computer volume up if the db LEDs aren't lighting up to the top value.

Testing output of the amplifier can be done by attaching a speaker to the output ports. You should hear the frequency stream tones on signals under 12,000 Hz

Sincerely,

Ken Uzzellhttp://heal-me.com.au

Trying to make Freex work

I have a pylepro pca4 2X120W ! It lights up when I turn the FREEX on but don't feel anything on leads coming out of the amp! Any insite ! Thanks

[Guest guest]



Dear Kip Walls,

That's great news the amplifier is working. 120 watts per channel is very serious power so make sure you are very careful with it.

The GB4000 off-the-shelf is a 2 watt function generator and one that is very popular. What we have here is high volts and very low current. Along with my PFA Series amplifers, these are purpose build for biological application. We use just enough current to keep the wave shape from generating malformations while under load.

By keeping the computer audio volume high, this will usually generate a higher quality square wave, as we get very fast rise and fall times, and with the top of the wave shape clipped, generates a very good quality sqarewave for the audio spectrum.

Take care a be safe!

Sincerely,

Ken Uzzellhttp://heal-me.com.au

Trying to make Freex work

I have a pylepro pca4 2X120W ! It lights up when I turn the FREEX on but don't feel anything on leads coming out of the amp! Any insite ! Thanks

_,_.___ __

[Guest guest]

What is the risk of what I am using ?

What is a better amp to use ?

How is the

PYLE PTAU23 2x40 Watt Stereo Amplifier/Amp Dual-AUX USB

Thanks Kip

Subject: Re: Trying to make Freex workTo: Rife Date: Sunday, November 27, 2011, 2:19 PM

Dear okiedokietoday,

Do the db leds light up to the top ?

You could try turning the computer volume up if the db LEDs aren't lighting up to the top value.

Testing output of the amplifier can be done by attaching a speaker to the output ports. You should hear the frequency stream tones on signals under 12,000 Hz

Sincerely,

Ken Uzzellhttp://heal-me.com.au

Trying to make Freex work

I have a pylepro pca4 2X120W ! It lights up when I turn the FREEX on but don't feel anything on leads coming out of the amp! Any insite ! Thanks

_,_.___ __

[Guest guest]



Hi Kip,

Stereo amplifiers aren't designed for biological application. So do not use it when storms are in your area.

If a Rife amplifier blows up, the signal goes dead and zero volts is on the electrode lines. If a stereo amplifier blows, then a huge DC charge could go to the electrodes and a person would get a nasty burn.

If your handy at putting a few electronics together, then the cheapest Rife system is a do-it-yourself at ...

http://heal-me.com.au/frex-pfa.html

If finances are healthy, then the GB4000 function generator is an excellent choice and has a long history of helping people in trouble.

My own amplifiers are very good, designed for FreX, but there is a long waiting que to get one.

For Plasma Transmitters ...

http://www.stenulson.net/

Very good for sensitive people, a long history of success.

http://www.resonantlight.com/

This is a very good RF based plasma transmitter, with a long history of success.

http://www.rt66.com/~rifetech/

For people interested in making their own Bare/Rife machine.

http://www.rifeforum.com/

At s Rife forums, there is a section where many more vendors place their adds. You need to register and get a password to access information.

Sincerely,

Ken Uzzellhttp://heal-me.com.au

Trying to make Freex work

I have a pylepro pca4 2X120W ! It lights up when I turn the FREEX on but don't feel anything on leads coming out of the amp! Any insite ! Thanks

_,_.___ __

[Guest guest]

Yeah,good points Ken.

I think I will look at Radio Shack to see if they have the supplies to make a

DIY FreX-PFA-2 amp.

>

> Hi Kip,

>

> Stereo amplifiers aren't designed for biological application. So do not use it

when storms are in your area.

>

> If a Rife amplifier blows up, the signal goes dead and zero volts is on the

electrode lines. If a stereo amplifier blows, then a huge DC charge could go to

the electrodes and a person would get a nasty burn.

>

> If your handy at putting a few electronics together, then the cheapest Rife

system is a do-it-yourself at ...

>

> http://heal-me.com.au/frex-pfa.html

>

> If finances are healthy, then the GB4000 function generator is an excellent

choice and has a long history of helping people in trouble.

>

> My own amplifiers are very good, designed for FreX, but there is a long

waiting que to get one.

>

> For Plasma Transmitters ...

>

> http://www.stenulson.net/

> Very good for sensitive people, a long history of success.

>

> http://www.resonantlight.com/

> This is a very good RF based plasma transmitter, with a long history of

success.

>

> http://www.rt66.com/~rifetech/

> For people interested in making their own Bare/Rife machine.

>

> http://www.rifeforum.com/

> At s Rife forums, there is a section where many more vendors place

their adds. You need to register and get a password to access information.

>

> Sincerely,

>

> Ken Uzzell

> http://heal-me.com.au

[Guest guest]

Wanting a non 110 amp! Do you have one available now ? How much are they ?

Would a battery operated music one work in the mean time ?

Subject: Re: Trying to make Freex workTo: Rife Date: Sunday, November 27, 2011, 2:19 PM

Dear okiedokietoday,

Do the db leds light up to the top ?

You could try turning the computer volume up if the db LEDs aren't lighting up to the top value.

Testing output of the amplifier can be done by attaching a speaker to the output ports. You should hear the frequency stream tones on signals under 12,000 Hz

Sincerely,

Ken Uzzellhttp://heal-me.com.au

Trying to make Freex work

I have a pylepro pca4 2X120W ! It lights up when I turn the FREEX on but don't feel anything on leads coming out of the amp! Any insite ! Thanks

_,_.___ __

[Guest guest]

Would a 5 amp battery powered amp do the job !

Subject: Re: Trying to make Freex workTo: Rife Date: Sunday, November 27, 2011, 2:19 PM

Dear okiedokietoday,

Do the db leds light up to the top ?

You could try turning the computer volume up if the db LEDs aren't lighting up to the top value.

Testing output of the amplifier can be done by attaching a speaker to the output ports. You should hear the frequency stream tones on signals under 12,000 Hz

Sincerely,

Ken Uzzellhttp://heal-me.com.au

Trying to make Freex work

I have a pylepro pca4 2X120W ! It lights up when I turn the FREEX on but don't feel anything on leads coming out of the amp! Any insite ! Thanks

_,_.___ __

[Guest guest]



Hi Kip,

The problem with audio amplifiers is that output is an AC signal, which was traditionally used in the early Rife machines, but has been found to cause blood to clump together. People have been thinking this feeling terrible after a Rife session is part of the Herx, when it isn't. It's a negative physiological response to Rife contact electrode use when using AC signals.

In an AC signal, the wave form cross over zero volts and oscillates between the (+) plus and (-) negative polarity. If treating eye conditions or if electrode contact needs to be around the head or above the neck line, then AC is a must use as the other type of signal, Frequency Pulsed DC can cause permanent eye damage.

But in traditional terms, RIFE frequency therapy via contact electrodes is applied via the hands (metal cylinders) we hold onto or via foot plates or foot basins.

The other problem with audio amplifiers is their bandwidth. One of the most important aspects of RIFE frequency therapy is for the device, be it contact electrodes or a plasma tube, is the ability for it to generate a good spread of harmonics. We want meaningful harmonics to get close to the 2 MegaHertz frequency range.

This comes from a square wave output that switches very fast. A square wave that switches at 200 or less nano seconds will deliver these results. Home audio amplifier system struggle to get harmonics to 30kHz.

I have tested square waves that switch at 200 nano second to 9 nano seconds. The 9 nano seconds switching device came from a square wave switching device Alvin Rose in Canada makes. Also Felts SA-02 switches at 9 nano seconds.

These devices are small power, only outputting 5 volts and are designed for the person constructing their own EMEM plasma machine.

Felts web site is at ... http://www.dfe.net/index.html

Not sure if Alvin has a web page but he makes airplanes and can be found at http://www.zenith.aero/profile/AlvinRose (I believe it is the same guy)

Both Alvin and are top of the field Rife Experts. Right up there with Bare, Dr. Loyd, Dr. Jeff Sutherland, Jimi Holman, Bruce Stenulson (sorry to all the other experts I didn't mention, they don't make e-mails long enough).

In a pinch, people do use AC audio amplifiers and will get some results. Pathogen do have active harmonics in the lower audio region, and there will be some positive physiological responses.

If I was struggling with a condition, and my budget restraints kept me from purchasing an EMEM or B/R or Rife amplifier with Pulsed DC output, then I would use an AC home amplifier instead of nothing. The pluses will outweigh the negatives (in my opinion).

My PFA-4 currently has a 2 week waiting list. People with other Rife devices may contact you privately and offer their device to you, there are some other pretty good and cheap Rife machines on the market.

Do avoid ones that use audio home amplifiers. You want a Pulsed DC output, or as Hulda calls it ... "Positive Off-Set DC" output when spending good money on a device. Here the wave form stays entirely above or below the zero volts and doesn't cross the zero volts. This has been claimed to cause blood to "un-clump" = very very beneficial for us. Our blood is able to transport oxygen and nutrients far better to remote parts of the body and into the smaller veins.

The GB4000 is about the top of the line for contact electrode use and has a long history of helping people.

Sincerely,Ken Uzzellhttp://frex.com.au

Trying to make Freex work

I have a pylepro pca4 2X120W ! It lights up when I turn the FREEX on but don't feel anything on leads coming out of the amp! Any insite ! Thanks

_,_.___ __

[Guest guest]

Ken,

Do have any additional information about the link between AC signal electrode

induced RIFE and hemo-cagregation?

Rodney

------------------------------

>Hi Kip,

>

>The problem with audio amplifiers is that output is an AC signal, which was

traditionally used in the early Rife machines, but has been found to cause blood

to clump together. People have been thinking this feeling terrible after a Rife

session is part of the Herx, when it isn't. It's a negative physiological

response to Rife contact electrode use when using AC signals.

>

>In an AC signal, the wave form cross over zero volts and oscillates between the

(+) plus and (-) negative polarity. If treating eye conditions or if electrode

contact needs to be around the head or above the neck line, then AC is a must

use as the other type of signal, Frequency Pulsed DC can cause permanent eye

damage.

>

>But in traditional terms, RIFE frequency therapy via contact electrodes is

applied via the hands (metal cylinders) we hold onto or via foot plates or foot

basins.

>

>The other problem with audio amplifiers is their bandwidth. One of the most

important aspects of RIFE frequency therapy is for the device, be it contact

electrodes or a plasma tube, is the ability for it to generate a good spread of

harmonics. We want meaningful harmonics to get close to the 2 MegaHertz

frequency range.

>

>This comes from a square wave output that switches very fast. A square wave

that switches at 200 or less nano seconds will deliver these results. Home audio

amplifier system struggle to get harmonics to 30kHz.

>

>I have tested square waves that switch at 200 nano second to 9 nano seconds.

The 9 nano seconds switching device came from a square wave switching device

Alvin Rose in Canada makes. Also Felts SA-02 switches at 9 nano seconds.

>

>These devices are small power, only outputting 5 volts and are designed for the

person constructing their own EMEM plasma machine.

>

> Felts web site is at ... http://www.dfe.net/index.html

>

>Not sure if Alvin has a web page but he makes airplanes and can be found at

http://www.zenith.aero/profile/AlvinRose (I believe it is the same guy)

>

>Both Alvin and are top of the field Rife Experts. Right up there with

Bare, Dr. Loyd, Dr. Jeff Sutherland, Jimi Holman, Bruce Stenulson (sorry

to all the other experts I didn't mention, they don't make e-mails long enough).

>

>In a pinch, people do use AC audio amplifiers and will get some results.

Pathogen do have active harmonics in the lower audio region, and there will be

some positive physiological responses.

>

>If I was struggling with a condition, and my budget restraints kept me from

purchasing an EMEM or B/R or Rife amplifier with Pulsed DC output, then I would

use an AC home amplifier instead of nothing. The pluses will outweigh the

negatives (in my opinion).

>

>My PFA-4 currently has a 2 week waiting list. People with other Rife devices

may contact you privately and offer their device to you, there are some other

pretty good and cheap Rife machines on the market.

>

>Do avoid ones that use audio home amplifiers. You want a Pulsed DC output, or

as Hulda calls it ... " Positive Off-Set DC " output when spending good

money on a device. Here the wave form stays entirely above or below the zero

volts and doesn't cross the zero volts. This has been claimed to cause blood to

" un-clump " = very very beneficial for us. Our blood is able to transport oxygen

and nutrients far better to remote parts of the body and into the smaller veins.

>

>The GB4000 is about the top of the line for contact electrode use and has a

long history of helping people.

>

>Sincerely,

>Ken Uzzell

>http://frex.com.au

>

>

>

> Trying to make Freex work

>

>

> I have a pylepro pca4 2X120W ! It lights up

when I turn the FREEX on but don't feel anything on leads coming out of the amp!

Any insite !

>

> Thanks

>

>

>

> _,_.___

> __

>

>

>

>

[Guest guest]

Hi Ken

Just wanted to let you know that I am still here and doing lots of Rife and electro

medical research..I don’t build airplanes except for this one which I use for trout

fishing in summer..It is featured on Zenith Aircrafts site and it shows some of the

flying activities I do in summer...I like flying and have many hours as a pilot since

1972. .I have a website which gets a large number of visitors each month from all over

the world..In january month it had 17,646 visitors from many countries around the world as it

provides information on health recovery from disease without toxic drugs..Follow

the protocols and it can easily save your life..check out MMS and other protocols

that work very well..The URL is http://www.health-recovery-info.com

also I am building a Rife Beam Ray Device that will run with Frex 16..It will duplicate

all of the original frequencys used by rife..It will convert the output from frex and

change it to a square wave..it will then produce a 3.1 mhz carrier and modulate

it with a square wave to give an identical signal to what Rife uses in his clinical machine...

that he had great success with..It will use 4 sweeps to take in all of the harmonics to

treat the diseases and will cover all of the viruses and bacteria..Details will be on my website

when the project is completed..I will send you some photos of the project..

The unit can also use a dvd player, f165 dds to produce a square wave..The carrier

of 3.1 mhz or 3.3 mhz and square wave conditioner is produced in the units internal

circuit board which was designed by Ralph Hartwell called a Rife Beam Ray Controller

and a plasma tube driver assembly..It can also be a pad device with hand held probes

More about this project later..I will send you some photos.

Alvin Rose

From: Ken Uzzell

Sent: Wednesday, February 22, 2012 6:45 PM

To: Rife

Subject: Re: Trying to make Freex work

 Hi Kip,

The problem with audio amplifiers is that output is an AC signal, which was traditionally used in the early Rife machines, but has been found to cause blood to clump together. People have been thinking this feeling terrible after a Rife session is part of the Herx, when it isn't. It's a negative physiological response to Rife contact electrode use when using AC signals.

In an AC signal, the wave form cross over zero volts and oscillates between the (+) plus and (-) negative polarity. If treating eye conditions or if electrode contact needs to be around the head or above the neck line, then AC is a must use as the other type of signal, Frequency Pulsed DC can cause permanent eye damage.

But in traditional terms, RIFE frequency therapy via contact electrodes is applied via the hands (metal cylinders) we hold onto or via foot plates or foot basins.

The other problem with audio amplifiers is their bandwidth. One of the most important aspects of RIFE frequency therapy is for the device, be it contact electrodes or a plasma tube, is the ability for it to generate a good spread of harmonics. We want meaningful harmonics to get close to the 2 MegaHertz frequency range.

This comes from a square wave output that switches very fast. A square wave that switches at 200 or less nano seconds will deliver these results. Home audio amplifier system struggle to get harmonics to 30kHz.

I have tested square waves that switch at 200 nano second to 9 nano seconds. The 9 nano seconds switching device came from a square wave switching device Alvin Rose in Canada makes. Also Felts SA-02 switches at 9 nano seconds.

These devices are small power, only outputting 5 volts and are designed for the person constructing their own EMEM plasma machine.

Felts web site is at ... http://www.dfe.net/index.html

Not sure if Alvin has a web page but he makes airplanes and can be found at http://www.zenith.aero/profile/AlvinRose (I believe it is the same guy)

Both Alvin and are top of the field Rife Experts. Right up there with Bare, Dr. Loyd, Dr. Jeff Sutherland, Jimi Holman, Bruce Stenulson (sorry to all the other experts I didn't mention, they don't make e-mails long enough).

In a pinch, people do use AC audio amplifiers and will get some results. Pathogen do have active harmonics in the lower audio region, and there will be some positive physiological responses.

If I was struggling with a condition, and my budget restraints kept me from purchasing an EMEM or B/R or Rife amplifier with Pulsed DC output, then I would use an AC home amplifier instead of nothing. The pluses will outweigh the negatives (in my opinion).

My PFA-4 currently has a 2 week waiting list. People with other Rife devices may contact you privately and offer their device to you, there are some other pretty good and cheap Rife machines on the market.

Do avoid ones that use audio home amplifiers. You want a Pulsed DC output, or as Hulda calls it ... "Positive Off-Set DC" output when spending good money on a device. Here the wave form stays entirely above or below the zero volts and doesn't cross the zero volts. This has been claimed to cause blood to "un-clump" = very very beneficial for us. Our blood is able to transport oxygen and nutrients far better to remote parts of the body and into the smaller veins.

The GB4000 is about the top of the line for contact electrode use and has a long history of helping people.

Sincerely,Ken Uzzellhttp://frex.com.au

Trying to make Freex work

I have a pylepro pca4 2X120W ! It lights up when I turn the FREEX on but don't feel anything on leads coming out of the amp! Any insite ! Thanks

_,_.___ __

[Guest guest]

All I want know is an expensive amplifier that will work with Freex. Seem like one operating off batteries or the laptop would be safest !

I had been using a Pyle Pro PCA4 2x120W . Its too powerful I think and scary ! Need something soon and heafd some deliveries are over 6 months !

Subject: Re: Trying to make Freex workTo: Rife Date: Sunday, November 27, 2011, 2:19 PM

Dear okiedokietoday,

Do the db leds light up to the top ?

You could try turning the computer volume up if the db LEDs aren't lighting up to the top value.

Testing output of the amplifier can be done by attaching a speaker to the output ports. You should hear the frequency stream tones on signals under 12,000 Hz

Sincerely,

Ken Uzzellhttp://heal-me.com.au

Trying to make Freex work

I have a pylepro pca4 2X120W ! It lights up when I turn the FREEX on but don't feel anything on leads coming out of the amp! Any insite ! Thanks

_,_.___ __

[Guest guest]



Thanks Alvin for the Update,

Sounds like you have your teeth into some interesting projects. I wish you all the success and look forward to your announcements.

I read on Daves web site that his SA-02 switches at 90 nanoseconds, so it must of been your squarer that switched at 9 nanoseconds or maybe I was reading mu oscilloscope wrong and needed to add another zero. I was looking at them both many years ago and thought how nifty you guys got such fast switching times.

I heard there was a new op-amp out that has a 50MHz bandwidth with a top limit around 20 volts - this will be interesting to look at.

I thought or Jeff said Rife was using a varible high frequency carrier with a fixed audio pulsing frequency. Something about 600kHz to 3.3 MHz ?

Sincerely,Ken Uzzellhttp://frex.com.au

Trying to make Freex work

I have a pylepro pca4 2X120W ! It lights up when I turn the FREEX on but don't feel anything on leads coming out of the amp! Any insite ! Thanks

_,_.___ __

[Guest guest]

Hi Ken

Rife had success when he used the 3.1 mhz and 3.3 mhz carrier on the

unit built by Philip Hoyland..you can find that information at

http://www.rifevideos.com/dr_rife_and_philip_hoylands_3.3mhz_sweep.html

you will find how it worked with square wave harmonics in a sweep. It is a variable sweep with square wave harmonics.

The sine to square converter switches at less then 10 nanoseconds, but it depends on the frequency.

This new one is faster and the waveform is divided by 2 so that a computer sound card can go to

25,000 or more..It is designed by Ralph Hartwell who designed the first SSQ device..It uses a IRF510

Mosfet as an rf amplifier and is rated at 10 watts..same output wattage as a Sa4 amp

It is an interesting project

looks good

Alvin

From: Ken Uzzell

Sent: Thursday, February 23, 2012 3:29 AM

To: Rife

Subject: Re: Trying to make Freex work

 Thanks Alvin for the Update,

Sounds like you have your teeth into some interesting projects. I wish you all the success and look forward to your announcements.

I read on Daves web site that his SA-02 switches at 90 nanoseconds, so it must of been your squarer that switched at 9 nanoseconds or maybe I was reading mu oscilloscope wrong and needed to add another zero. I was looking at them both many years ago and thought how nifty you guys got such fast switching times.

I heard there was a new op-amp out that has a 50MHz bandwidth with a top limit around 20 volts - this will be interesting to look at.

I thought or Jeff said Rife was using a varible high frequency carrier with a fixed audio pulsing frequency. Something about 600kHz to 3.3 MHz ?

Sincerely,Ken Uzzellhttp://frex.com.au

Trying to make Freex work

I have a pylepro pca4 2X120W ! It lights up when I turn the FREEX on but don't feel anything on leads coming out of the amp! Any insite ! Thanks

_,_.___ __

[Guest guest]



Hi Rodney,

This information appeared a few years back on the rife-list forum (from memory). A therapist who did blood work had tested the AC signals with patients. People were complaining of feeling terrible after Rife electrode sessions when AC signals were used, and the Rifers at the time were saying this is appart of the herx response. Blood tests done by the therapist displayed blood cells had clumped together. It was shortly after these discussions that Rife vendors installed the frequency pulsed DC signals in their machines.

The QB4000 people may have more information here as they have the microscopes to do the tests and they were one of the vendors to place a DC signal in their frequency generator after these discussions.

I have both DC and AC in my amplifiers, and have tested this out quite a bit with Lyme sufferers here. Although I don't have microscopes to to do blood work, when I have asked them to try AC, they all report feeling terrible after the session.

When we used DC, then this effect was avoided but their health still improved.

Dr. Loyd has said DC is about 10 times more potent at knocking out microbes than AC signals. I am not sure how he came to this conclusion, he relies on muscle testing and other techniques. He gets excellent results with people so is well respected in the Rife community.

There has been a popular belief that AC was required to generate resoance. I.E. the signal needed to go from (+) to (-) polarities to generate a resonance in a component of the microbe to bring about its distruction.

I can't offer any hard scientific evidence on this, as I don't have the labs or the equipment to do tests. My comments come from observations of how people respond and how fast a return to health is experienced and what level of herx's are experienced along the jouney.

Sincerely,Ken Uzzellhttp://frex.com.au

Trying to make Freex work>>> I have a pylepro pca4 2X120W ! It lights up when I turn the FREEX on but don't feel anything on leads coming out of the amp! Any insite ! >> Thanks > > >> _,_.___> __ > >>>

[Guest guest]

Below is a copy & paste from Dr. Hulda PDF manual.

(No changes made)

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Any positively offset frequency kills all bacteria, viruses and

parasites simultaneously

given sufficient voltage (5 to 10 volts), duration (seven

minutes), and frequency (anything from 10 Hz to 500,000 Hz).

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Otherwise it has to be 7-20-7-20-7 minutes cycle.

1st 7 minutes kill Parasites

During 20 mnts interval, parasites release Bacteriae.

2nd 7 mnts. kill Bacteriae.

During next 20 mnts. interval, Bacteriae release Viruses (Viri?).

3rd 7 mnts. kill vituses.

Total duration becomes 7+20+7+20+7=61 mnts.

With positively offset frequency, all this is achieved

simultaneously in 7mnts.

No need for 7-20-7-20-7 cycle.

Who says this, visit:

http://www.whale.to/cancer/clark.pdf

Pls hv mercy, no use pointing finger @ me &

exploit in any manner.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

On, 2/24/2012 7:31 AM, Ken Uzzell wrote:

I can't offer any hard

scientific evidence on this, as I don't have the labs or the

equipment to do tests. My comments come from observations of how

people respond and how fast a return to health is experienced

and what level of herx's are experienced along the jouney.

[Guest guest]

isn't the 7-20-7-20-7 sequince positive offset? on dr. clark's zapper?To: Rife Sent: Fri, February 24, 2012 4:48:28 AMSubject: Re: Trying to make Freex work

Below is a copy & paste from Dr. Hulda PDF manual.

(No changes made)

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Any positively offset frequency kills all bacteria, viruses and

parasites simultaneously

given sufficient voltage (5 to 10 volts), duration (seven

minutes), and frequency (anything from 10 Hz to 500,000 Hz).

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Otherwise it has to be 7-20-7-20-7 minutes cycle.

1st 7 minutes kill Parasites

During 20 mnts interval, parasites release Bacteriae.

2nd 7 mnts. kill Bacteriae.

During next 20 mnts. interval, Bacteriae release Viruses (Viri?).

3rd 7 mnts. kill vituses.

Total duration becomes 7+20+7+20+7=61 mnts.

With positively offset frequency, all this is achieved

simultaneously in 7mnts.

No need for 7-20-7-20-7 cycle.

Who says this, visit:

http://www.whale.to/cancer/clark.pdf

Pls hv mercy, no use pointing finger @ me &

exploit in any manner.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

On, 2/24/2012 7:31 AM, Ken Uzzell wrote:

I can't offer any hard

scientific evidence on this, as I don't have the labs or the

equipment to do tests. My comments come from observations of how

people respond and how fast a return to health is experienced

and what level of herx's are experienced along the jouney.

[Guest guest]

did someone answer and i missed it? thanks for an answer....

ariella

> I can't offer any hard scientific evidence on this, as I don't have

the

> labs or the equipment to do tests. My comments come from observations

of

> how people respond and how fast a return to health is experienced

> and what level of herx's are experienced along the jouney.

>

[Guest guest]

If my mongrel dog had "blood clumping" how would I know and how would I get the clumping cured ?

Subject: Re: Trying to make Freex workTo: Rife Date: Sunday, November 27, 2011, 2:19 PM

Dear okiedokietoday,

Do the db leds light up to the top ?

You could try turning the computer volume up if the db LEDs aren't lighting up to the top value.

Testing output of the amplifier can be done by attaching a speaker to the output ports. You should hear the frequency stream tones on signals under 12,000 Hz

Sincerely,

Ken Uzzellhttp://heal-me.com.au

Trying to make Freex work

I have a pylepro pca4 2X120W ! It lights up when I turn the FREEX on but don't feel anything on leads coming out of the amp! Any insite ! Thanks

_,_.___ __

[Guest guest]



Hi Kip,

Dogs liver produce mega dose vitamin C, so over time that would resolve thing, and also as mentioned eariler the use of a Hulda Calr Zapper is a DC signal and that will unclump the blood. I have seen mini zappers so small they clip on top of the 9 volt battery, costs have been as low at $10

Sincerely,Ken Uzzellhttp://frex.com.au

Trying to make Freex work

I have a pylepro pca4 2X120W ! It lights up when I turn the FREEX on but don't feel anything on leads coming out of the amp! Any insite ! Thanks

_,_.___ __

[Guest guest]

How d0 I verify if the force is DC and square ? Thanks for all the info ? I

hate reinventing the wheel ! Don't want to kill my mutt either !

Also I noticed several different HC small zappers ! Which would be best for the

blood etc !

Subject: Re: Trying to make Freex work

To: Rife

Date: Sunday, November 27, 2011, 2:19 PM

 

Dear okiedokietoday,

 

Do the db leds light up to the top ?

 

You could try turning the computer volume up if the db LEDs aren't lighting up

to the top value.

 

Testing output of the amplifier can be done by attaching a speaker to the

output ports. You should hear the frequency stream tones on signals under 12,000

Hz

 

Sincerely,

 

Ken Uzzell

http://heal-me.com.au

Trying to make Freex work

I have a  pylepro pca4 2X120W ! It lights up when I turn the FREEX on but don't

feel anything on leads coming out of the amp!  Any insite !

Thanks 

 

_,_.___ __

[Guest guest]

In the initial stages, before her son proved

positive offset frequency

benefits, the sequence 7-20-7-20-7 was in use still.

It may have taken some length of time to prove & confirm,

that a single session of 7 mnts. of positive offset frequency

zaps all stages of parasite, bacteria & virus simutaneously.

In the newer zappers the gap between the sessions is only 1mnt. or

half a mnt.,

to give our body a marginal short adjustment gap.

In the FREX software the changeover of frequency is rapid, without

gap.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

isn't the 7-20-7-20-7 sequince positive offset? on dr.

clark's zapper?

From:

MMGM

To:

Rife

Sent: Fri,

February 24, 2012 4:48:28 AM

Subject:

Re: Trying to make Freex work

Below is a copy & paste from Dr. Hulda PDF

manual.

(No changes made)

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Any positively offset frequency kills all bacteria,

viruses and parasites simultaneously

given sufficient voltage (5 to 10 volts), duration

(seven

minutes), and frequency (anything from 10 Hz to

500,000 Hz).

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Otherwise it has to be 7-20-7-20-7 minutes cycle.

1st 7 minutes kill Parasites

During 20 mnts interval, parasites release Bacteriae.

2nd 7 mnts. kill Bacteriae.

During next 20 mnts. interval, Bacteriae release

Viruses (Viri?).

3rd 7 mnts. kill vituses.

Total duration becomes 7+20+7+20+7=61 mnts.

With positively offset frequency, all this is achieved

simultaneously in 7mnts.

No need for 7-20-7-20-7 cycle.

Who says this, visit:

http://www.whale.to/cancer/clark.pdf

Pls hv mercy, no use pointing finger @

me & exploit in any manner.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

On, 2/24/2012 7:31 AM, Ken Uzzell wrote:

I

can't offer any hard scientific evidence on this, as I

don't have the labs or the equipment to do tests. My

comments come from observations of how people respond

and how fast a return to health is experienced and

what level of herx's are experienced along the jouney.

[Guest guest]

What does “positively offset frequency “ mean?

I have an older Sota zapper and have done the 7-20-7-20-7 many times, but never noticed any die off, strange things passing or health improvement.

<Below is a copy & paste from Dr. Hulda PDF manual.(No changes made)!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Any positively offset frequency kills all bacteria, viruses and parasites simultaneouslygiven sufficient voltage (5 to 10 volts), duration (sevenminutes), and frequency (anything from 10 Hz to 500,000 Hz).!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Otherwise it has to be 7-20-7-20-7 minutes cycle.1st 7 minutes kill ParasitesDuring 20 mnts interval, parasites release Bacteriae.2nd 7 mnts. kill Bacteriae.During next 20 mnts. interval, Bacteriae release Viruses (Viri?).3rd 7 mnts. kill vituses.Total duration becomes 7+20+7+20+7=61 mnts.With positively offset frequency, all this is achieved simultaneously in 7mnts.No need for 7-20-7-20-7 cycle.Who says this, visit:http://www.whale.to/cancer/clark.pdfPls hv mercy, no use pointing finger @ me & exploit in any manner.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!>

Bonita PoulinCanadian CoordinatorGLOBAL RECOGNITION CAMPAIGNMultiple Chemical Sensitivityand other Chemically Induced Illnesses, Diseases & Injuryaffecting civilians and military personnelwww.mcs-global.org www.mcsglobalawareness.com

[Guest guest]



Hi Kip,

For HC zappers, you want ones that have a bio-impedance circuit in it. This will keep the square wave square when using wet tissues around the hand held contacts. Otherwise the square wave will fall over and the harmonics will be effected.

I would suggest you obtain Ralph Hartwells SSQ-2F circuit.

http://rife-beam-ray.com/

Designed for computer audio signals this will give you the real Rife sweep. Probably only needs a MOSFET and power supply to take the output 12 VDC to 18 VDC and you have your own MOPA contact electrode system that will let you do the Rife seep.

Here is the commercial version at quantumbalancing....

http://www.quantumbalancing.com/mopa.htm

This could be the closest thing we have had to copying the signal as Dr. Rife original machines.

Here is a mission critical read to understand what this is about.

http://rifevideos.com/dr_rife_and_philip_hoylands_3.3mhz_sweep.html

I haven't heard any feed-back on these devices. They are new and haven't been in circulation for long. It would be spectacular to hear from someone with Lyme disease who had used these systems. Lyme sufferers in Australia sure could use a break and a fast method of healing. The current systems are great and working well for them, but that is not to say we can't do better.

If they are the real McCoy, then they should be better/cured in a few weeks of use.

No, I am not Ralph's salesman, nor am I affiliated with QuantumBalancing or Spectrotek. I am a therapist who has been treating people for many years with RIFE devices and always on the look-out for something better. This may be it :-)

Frex will run the SSQ-2F expertly. And if getting great results with the SSQ-2F I'd put a translation option in FreX that displays the correct output frequency. The SSQ-2F has frequency doubling, so if we output 880 Hz in the FreX FG, we'll get 1,760 Hz out of the SSQ-2F.

Sincerely,Ken Uzzellhttp://frex.com.au

Trying to make Freex workI have a pylepro pca4 2X120W ! It lights up when I turn the FREEX on but don't feel anything on leads coming out of the amp! Any insite ! Thanks _,_.___ __