building your own using pc software and stereo

[Guest guest]

Yes, that works too. If you substitute the headphones with a heating pad or an

electric blanketyou will also get excellent results without the annoying sound.

Strap around the temperature controller if it is electronic. If the controller

is a simple switch then just set the switch to high. I quit building Rife

machines with gas tubes a long time ago as this method has much better effects

and a broader range.

I used a 70 volt commercial amplifier and could detect a strong field 30 inches

above the blanket. Even with a small heating pad, the energy coupled to the body

and the signal was evenly distributed from head to toe regardless of where I

placed the pad.

You can get a line-to-voice-coil transformer and convert any home audio amp to a

70 volt system by wiring the transformer backwards towards the amplifier's low

impedance output terminals.

Caveat Emptor! Carmi Hazen

.......................................................................

......................PROBABLY WON'T GET MUCH RESPONSE FROM THIS SITE.....these

guys are really advanced..........but ,,,,,yes i put a similar model

together......used other software but purchaced the hook ups and electrodes from

" no rift " .........used my old radio amp and bingo!!!!!!!apply the electrode

treatment along with audio by just plugging in headphones...........my dollar

outlay was about125.00............works for me!!!!!!!!!!!!!joe