Jump to content
RemedySpot.com

Re: A2 Testing

Rate this topic


Recommended Posts

Guest guest
Posted

Hi, You can send your own. GenomNZ has a website with all the information. Mine worked out to $15 each Canadian, US might be slightly more due to the exchange rate. There is no minimum number. The wesite has printable forms, including the vector permit you need to enclose with the hair samples. They can go regular mail which cost a couple of dollars..marion

To: RawDairy From: topoftheworldfarm@...Date: Wed, 28 Apr 2010 13:35:17 +0000Subject: A2 Testing

Hey folks,I have found a place that will do A2 testing. The cost per animal is $30, if you have over 10 animals. If not, the total cost is $300, regardless of the number of animals. So, if you had five to test, it'd be $60 per cow, four to test, $75 per cow. Anyway, I thought this was no longer available, and am excited I found it. Rob said it takes 6-8 weeks, but here is the actual form to print and fill out.Best Wishes!A2 TestingSender's InformationName: ___________________________________ Address__________________________________ City: _____________________________ State: ___________ Zip: _________Phone: ____________________ Cell: ______________________________ FAX__________________E-mail address: ________________________________________________Are you a current user of LIC Sires? __________ would you like to be included on our mailing list? (Receive Green to Gold magazine, Sire Directory and other information) ____________________Preferred method of receiving results? Mail, FAX or email ________________________Instructions: A hair sample is required for A2 testing. Pull a bunch of (roughly) 20 tail hairs from the switch of the cow's tail. It's important to make sure the hairs are pulled out and not cut off, as we're after the hair root. The hair needs to be fairly clean and also dry, as dung or water can cause the hair roots to rot in transit. Seal the 20 hairs from each animal in a small zip-lock bag labeled with the animal's name/tag number or whatever you'd like the animal identified as. Ship samples with payment to; Seymour Dairy Inc7580 Redberg Rd.Cloverdale, OR 97112Samples must be accompanied by payment of $30.00 per sample. Make checks out to Seymour Dairy Inc($300 minimum required)Results are typically available in 3-4 wks.If you have any questions contact Rob at 1- 1-888-LIC-BULL

Got a phone? Get Hotmail Messenger for mobile!

Guest guest
Posted

Hi, You can send your own. GenomNZ has a website with all the information. Mine worked out to $15 each Canadian, US might be slightly more due to the exchange rate. There is no minimum number. The wesite has printable forms, including the vector permit you need to enclose with the hair samples. They can go regular mail which cost a couple of dollars..marion

To: RawDairy From: topoftheworldfarm@...Date: Wed, 28 Apr 2010 13:35:17 +0000Subject: A2 Testing

Hey folks,I have found a place that will do A2 testing. The cost per animal is $30, if you have over 10 animals. If not, the total cost is $300, regardless of the number of animals. So, if you had five to test, it'd be $60 per cow, four to test, $75 per cow. Anyway, I thought this was no longer available, and am excited I found it. Rob said it takes 6-8 weeks, but here is the actual form to print and fill out.Best Wishes!A2 TestingSender's InformationName: ___________________________________ Address__________________________________ City: _____________________________ State: ___________ Zip: _________Phone: ____________________ Cell: ______________________________ FAX__________________E-mail address: ________________________________________________Are you a current user of LIC Sires? __________ would you like to be included on our mailing list? (Receive Green to Gold magazine, Sire Directory and other information) ____________________Preferred method of receiving results? Mail, FAX or email ________________________Instructions: A hair sample is required for A2 testing. Pull a bunch of (roughly) 20 tail hairs from the switch of the cow's tail. It's important to make sure the hairs are pulled out and not cut off, as we're after the hair root. The hair needs to be fairly clean and also dry, as dung or water can cause the hair roots to rot in transit. Seal the 20 hairs from each animal in a small zip-lock bag labeled with the animal's name/tag number or whatever you'd like the animal identified as. Ship samples with payment to; Seymour Dairy Inc7580 Redberg Rd.Cloverdale, OR 97112Samples must be accompanied by payment of $30.00 per sample. Make checks out to Seymour Dairy Inc($300 minimum required)Results are typically available in 3-4 wks.If you have any questions contact Rob at 1- 1-888-LIC-BULL

Got a phone? Get Hotmail Messenger for mobile!

Guest guest
Posted

Hi, You can send your own. GenomNZ has a website with all the information. Mine worked out to $15 each Canadian, US might be slightly more due to the exchange rate. There is no minimum number. The wesite has printable forms, including the vector permit you need to enclose with the hair samples. They can go regular mail which cost a couple of dollars..marion

To: RawDairy From: topoftheworldfarm@...Date: Wed, 28 Apr 2010 13:35:17 +0000Subject: A2 Testing

Hey folks,I have found a place that will do A2 testing. The cost per animal is $30, if you have over 10 animals. If not, the total cost is $300, regardless of the number of animals. So, if you had five to test, it'd be $60 per cow, four to test, $75 per cow. Anyway, I thought this was no longer available, and am excited I found it. Rob said it takes 6-8 weeks, but here is the actual form to print and fill out.Best Wishes!A2 TestingSender's InformationName: ___________________________________ Address__________________________________ City: _____________________________ State: ___________ Zip: _________Phone: ____________________ Cell: ______________________________ FAX__________________E-mail address: ________________________________________________Are you a current user of LIC Sires? __________ would you like to be included on our mailing list? (Receive Green to Gold magazine, Sire Directory and other information) ____________________Preferred method of receiving results? Mail, FAX or email ________________________Instructions: A hair sample is required for A2 testing. Pull a bunch of (roughly) 20 tail hairs from the switch of the cow's tail. It's important to make sure the hairs are pulled out and not cut off, as we're after the hair root. The hair needs to be fairly clean and also dry, as dung or water can cause the hair roots to rot in transit. Seal the 20 hairs from each animal in a small zip-lock bag labeled with the animal's name/tag number or whatever you'd like the animal identified as. Ship samples with payment to; Seymour Dairy Inc7580 Redberg Rd.Cloverdale, OR 97112Samples must be accompanied by payment of $30.00 per sample. Make checks out to Seymour Dairy Inc($300 minimum required)Results are typically available in 3-4 wks.If you have any questions contact Rob at 1- 1-888-LIC-BULL

Got a phone? Get Hotmail Messenger for mobile!

Guest guest
Posted

The address is www.genomnz.co.nz/Home/tabid/36/default.aspx

To: rawdairy From: mar_clem@...Date: Wed, 28 Apr 2010 16:51:33 +0000Subject: RE: A2 Testing

Hi, You can send your own. GenomNZ has a website with all the information. Mine worked out to $15 each Canadian, US might be slightly more due to the exchange rate. There is no minimum number. The wesite has printable forms, including the vector permit you need to enclose with the hair samples. They can go regular mail which cost a couple of dollars..marion

To: RawDairy From: topoftheworldfarmwildblue (DOT) netDate: Wed, 28 Apr 2010 13:35:17 +0000Subject: A2 Testing

Hey folks,I have found a place that will do A2 testing. The cost per animal is $30, if you have over 10 animals. If not, the total cost is $300, regardless of the number of animals. So, if you had five to test, it'd be $60 per cow, four to test, $75 per cow. Anyway, I thought this was no longer available, and am excited I found it. Rob said it takes 6-8 weeks, but here is the actual form to print and fill out.Best Wishes!A2 TestingSender's InformationName: ___________________________________ Address__________________________________ City: _____________________________ State: ___________ Zip: _________Phone: ____________________ Cell: ______________________________ FAX__________________E-mail address: ________________________________________________Are you a current user of LIC Sires? __________ would you like to be included on our mailing list? (Receive Green to Gold magazine, Sire Directory and other information) ____________________Preferred method of receiving results? Mail, FAX or email ________________________Instructions: A hair sample is required for A2 testing. Pull a bunch of (roughly) 20 tail hairs from the switch of the cow's tail. It's important to make sure the hairs are pulled out and not cut off, as we're after the hair root. The hair needs to be fairly clean and also dry, as dung or water can cause the hair roots to rot in transit. Seal the 20 hairs from each animal in a small zip-lock bag labeled with the animal's name/tag number or whatever you'd like the animal identified as. Ship samples with payment to; Seymour Dairy Inc7580 Redberg Rd.Cloverdale, OR 97112Samples must be accompanied by payment of $30.00 per sample. Make checks out to Seymour Dairy Inc($300 minimum required)Results are typically available in 3-4 wks.If you have any questions contact Rob at 1- 1-888-LIC-BULL

Got a phone? Get Hotmail Messenger for mobile!

Got a phone? Get Hotmail Messenger for mobile!

Guest guest
Posted

The address is www.genomnz.co.nz/Home/tabid/36/default.aspx

To: rawdairy From: mar_clem@...Date: Wed, 28 Apr 2010 16:51:33 +0000Subject: RE: A2 Testing

Hi, You can send your own. GenomNZ has a website with all the information. Mine worked out to $15 each Canadian, US might be slightly more due to the exchange rate. There is no minimum number. The wesite has printable forms, including the vector permit you need to enclose with the hair samples. They can go regular mail which cost a couple of dollars..marion

To: RawDairy From: topoftheworldfarmwildblue (DOT) netDate: Wed, 28 Apr 2010 13:35:17 +0000Subject: A2 Testing

Hey folks,I have found a place that will do A2 testing. The cost per animal is $30, if you have over 10 animals. If not, the total cost is $300, regardless of the number of animals. So, if you had five to test, it'd be $60 per cow, four to test, $75 per cow. Anyway, I thought this was no longer available, and am excited I found it. Rob said it takes 6-8 weeks, but here is the actual form to print and fill out.Best Wishes!A2 TestingSender's InformationName: ___________________________________ Address__________________________________ City: _____________________________ State: ___________ Zip: _________Phone: ____________________ Cell: ______________________________ FAX__________________E-mail address: ________________________________________________Are you a current user of LIC Sires? __________ would you like to be included on our mailing list? (Receive Green to Gold magazine, Sire Directory and other information) ____________________Preferred method of receiving results? Mail, FAX or email ________________________Instructions: A hair sample is required for A2 testing. Pull a bunch of (roughly) 20 tail hairs from the switch of the cow's tail. It's important to make sure the hairs are pulled out and not cut off, as we're after the hair root. The hair needs to be fairly clean and also dry, as dung or water can cause the hair roots to rot in transit. Seal the 20 hairs from each animal in a small zip-lock bag labeled with the animal's name/tag number or whatever you'd like the animal identified as. Ship samples with payment to; Seymour Dairy Inc7580 Redberg Rd.Cloverdale, OR 97112Samples must be accompanied by payment of $30.00 per sample. Make checks out to Seymour Dairy Inc($300 minimum required)Results are typically available in 3-4 wks.If you have any questions contact Rob at 1- 1-888-LIC-BULL

Got a phone? Get Hotmail Messenger for mobile!

Got a phone? Get Hotmail Messenger for mobile!

Guest guest
Posted

The address is www.genomnz.co.nz/Home/tabid/36/default.aspx

To: rawdairy From: mar_clem@...Date: Wed, 28 Apr 2010 16:51:33 +0000Subject: RE: A2 Testing

Hi, You can send your own. GenomNZ has a website with all the information. Mine worked out to $15 each Canadian, US might be slightly more due to the exchange rate. There is no minimum number. The wesite has printable forms, including the vector permit you need to enclose with the hair samples. They can go regular mail which cost a couple of dollars..marion

To: RawDairy From: topoftheworldfarmwildblue (DOT) netDate: Wed, 28 Apr 2010 13:35:17 +0000Subject: A2 Testing

Hey folks,I have found a place that will do A2 testing. The cost per animal is $30, if you have over 10 animals. If not, the total cost is $300, regardless of the number of animals. So, if you had five to test, it'd be $60 per cow, four to test, $75 per cow. Anyway, I thought this was no longer available, and am excited I found it. Rob said it takes 6-8 weeks, but here is the actual form to print and fill out.Best Wishes!A2 TestingSender's InformationName: ___________________________________ Address__________________________________ City: _____________________________ State: ___________ Zip: _________Phone: ____________________ Cell: ______________________________ FAX__________________E-mail address: ________________________________________________Are you a current user of LIC Sires? __________ would you like to be included on our mailing list? (Receive Green to Gold magazine, Sire Directory and other information) ____________________Preferred method of receiving results? Mail, FAX or email ________________________Instructions: A hair sample is required for A2 testing. Pull a bunch of (roughly) 20 tail hairs from the switch of the cow's tail. It's important to make sure the hairs are pulled out and not cut off, as we're after the hair root. The hair needs to be fairly clean and also dry, as dung or water can cause the hair roots to rot in transit. Seal the 20 hairs from each animal in a small zip-lock bag labeled with the animal's name/tag number or whatever you'd like the animal identified as. Ship samples with payment to; Seymour Dairy Inc7580 Redberg Rd.Cloverdale, OR 97112Samples must be accompanied by payment of $30.00 per sample. Make checks out to Seymour Dairy Inc($300 minimum required)Results are typically available in 3-4 wks.If you have any questions contact Rob at 1- 1-888-LIC-BULL

Got a phone? Get Hotmail Messenger for mobile!

Got a phone? Get Hotmail Messenger for mobile!

Guest guest
Posted

OBTW, Select Sires has a catalog of tested bulls,dairy of course, from which to select.

Didn't mean this as an advertrtisement, just found out when we were gettin' our semen tank filled and were lookin for more polled Jersey semen. I was surprised at how few A2/A2 bulls exist in any breed.

robie robinson

Subject: A2 TestingTo: RawDairy Date: Wednesday, April 28, 2010, 9:35 AM

Hey folks,I have found a place that will do A2 testing. The cost per animal is $30, if you have over 10 animals. If not, the total cost is $300, regardless of the number of animals. So, if you had five to test, it'd be $60 per cow, four to test, $75 per cow. Anyway, I thought this was no longer available, and am excited I found it. Rob said it takes 6-8 weeks, but here is the actual form to print and fill out.Best Wishes!A2 TestingSender's InformationName: ____________ _________ _________ _____ Address_____ _________ _________ _________ __ City: ____________ _________ ________ State: ___________ Zip: _________Phone: ____________ ________ Cell: ____________ _________ _________ FAX_________ _________E-mail address: ____________ _________ _________ _________ _________Are you a current user of LIC Sires? __________ would you like to be included on our mailing list? (Receive Green to Gold magazine,

Sire Directory and other information) ____________ ________Preferred method of receiving results? Mail, FAX or email ____________ _________ ___Instructions: A hair sample is required for A2 testing. Pull a bunch of (roughly) 20 tail hairs from the switch of the cow's tail. It's important to make sure the hairs are pulled out and not cut off, as we're after the hair root. The hair needs to be fairly clean and also dry, as dung or water can cause the hair roots to rot in transit. Seal the 20 hairs from each animal in a small zip-lock bag labeled with the animal's name/tag number or whatever you'd like the animal identified as. Ship samples with payment to; Seymour Dairy Inc7580 Redberg Rd.Cloverdale, OR 97112Samples must be accompanied by payment of $30.00 per sample. Make checks out to Seymour Dairy Inc($300 minimum required)Results are typically available in 3-4 wks.If you have any questions

contact Rob at 1- 1-888-LIC-BULL

Guest guest
Posted

OBTW, Select Sires has a catalog of tested bulls,dairy of course, from which to select.

Didn't mean this as an advertrtisement, just found out when we were gettin' our semen tank filled and were lookin for more polled Jersey semen. I was surprised at how few A2/A2 bulls exist in any breed.

robie robinson

Subject: A2 TestingTo: RawDairy Date: Wednesday, April 28, 2010, 9:35 AM

Hey folks,I have found a place that will do A2 testing. The cost per animal is $30, if you have over 10 animals. If not, the total cost is $300, regardless of the number of animals. So, if you had five to test, it'd be $60 per cow, four to test, $75 per cow. Anyway, I thought this was no longer available, and am excited I found it. Rob said it takes 6-8 weeks, but here is the actual form to print and fill out.Best Wishes!A2 TestingSender's InformationName: ____________ _________ _________ _____ Address_____ _________ _________ _________ __ City: ____________ _________ ________ State: ___________ Zip: _________Phone: ____________ ________ Cell: ____________ _________ _________ FAX_________ _________E-mail address: ____________ _________ _________ _________ _________Are you a current user of LIC Sires? __________ would you like to be included on our mailing list? (Receive Green to Gold magazine,

Sire Directory and other information) ____________ ________Preferred method of receiving results? Mail, FAX or email ____________ _________ ___Instructions: A hair sample is required for A2 testing. Pull a bunch of (roughly) 20 tail hairs from the switch of the cow's tail. It's important to make sure the hairs are pulled out and not cut off, as we're after the hair root. The hair needs to be fairly clean and also dry, as dung or water can cause the hair roots to rot in transit. Seal the 20 hairs from each animal in a small zip-lock bag labeled with the animal's name/tag number or whatever you'd like the animal identified as. Ship samples with payment to; Seymour Dairy Inc7580 Redberg Rd.Cloverdale, OR 97112Samples must be accompanied by payment of $30.00 per sample. Make checks out to Seymour Dairy Inc($300 minimum required)Results are typically available in 3-4 wks.If you have any questions

contact Rob at 1- 1-888-LIC-BULL

Guest guest
Posted

OBTW, Select Sires has a catalog of tested bulls,dairy of course, from which to select.

Didn't mean this as an advertrtisement, just found out when we were gettin' our semen tank filled and were lookin for more polled Jersey semen. I was surprised at how few A2/A2 bulls exist in any breed.

robie robinson

Subject: A2 TestingTo: RawDairy Date: Wednesday, April 28, 2010, 9:35 AM

Hey folks,I have found a place that will do A2 testing. The cost per animal is $30, if you have over 10 animals. If not, the total cost is $300, regardless of the number of animals. So, if you had five to test, it'd be $60 per cow, four to test, $75 per cow. Anyway, I thought this was no longer available, and am excited I found it. Rob said it takes 6-8 weeks, but here is the actual form to print and fill out.Best Wishes!A2 TestingSender's InformationName: ____________ _________ _________ _____ Address_____ _________ _________ _________ __ City: ____________ _________ ________ State: ___________ Zip: _________Phone: ____________ ________ Cell: ____________ _________ _________ FAX_________ _________E-mail address: ____________ _________ _________ _________ _________Are you a current user of LIC Sires? __________ would you like to be included on our mailing list? (Receive Green to Gold magazine,

Sire Directory and other information) ____________ ________Preferred method of receiving results? Mail, FAX or email ____________ _________ ___Instructions: A hair sample is required for A2 testing. Pull a bunch of (roughly) 20 tail hairs from the switch of the cow's tail. It's important to make sure the hairs are pulled out and not cut off, as we're after the hair root. The hair needs to be fairly clean and also dry, as dung or water can cause the hair roots to rot in transit. Seal the 20 hairs from each animal in a small zip-lock bag labeled with the animal's name/tag number or whatever you'd like the animal identified as. Ship samples with payment to; Seymour Dairy Inc7580 Redberg Rd.Cloverdale, OR 97112Samples must be accompanied by payment of $30.00 per sample. Make checks out to Seymour Dairy Inc($300 minimum required)Results are typically available in 3-4 wks.If you have any questions

contact Rob at 1- 1-888-LIC-BULL

Guest guest
Posted

Check the folks who carry NZ sires. You'll find a lot more A2 genetics

over there.

Pete

robie robinson wrote:

>

>

> OBTW, Select Sires has a catalog of tested bulls,dairy of course, from

> which to select.

> Didn't mean this as an advertrtisement, just found out when we were

> gettin' our semen tank filled and were lookin for more polled Jersey

> semen. I was surprised at how few A2/A2 bulls exist in any breed.

>

> robie robinson

>

>

>

>

>

> Subject: A2 Testing

> To: RawDairy

> Date: Wednesday, April 28, 2010, 9:35 AM

>

>

> Hey folks,

> I have found a place that will do A2 testing.

> The cost per animal is $30, if you have over 10 animals. If not,

> the total cost is $300, regardless of the number of animals. So,

> if you had five to test, it'd be $60 per cow, four to test, $75

> per cow.

> Anyway, I thought this was no longer available, and am excited I

> found it. Rob said it takes 6-8 weeks, but here is the actual form

> to print and fill out.

> Best Wishes!

>

>

> A2 Testing

>

> Sender's Information

> Name: ____________ _________ _________ _____

> Address_____ _________ _________ _________ __ City: ____________

> _________ ________ State: ___________ Zip: _________

> Phone: ____________ ________ Cell: ____________ _________

> _________ FAX_________ _________

> E-mail address: ____________ _________ _________ _________ _________

> Are you a current user of LIC Sires? __________ would you like to

> be included on our mailing list? (Receive Green to Gold magazine,

> Sire Directory and other information) ____________ ________

> Preferred method of receiving results? Mail, FAX or email

> ____________ _________ ___

>

> Instructions: A hair sample is required for A2 testing. Pull a

> bunch of (roughly) 20 tail hairs from the switch of the cow's

> tail. It's important to make sure the hairs are pulled out and not

> cut off, as we're after the hair root. The hair needs to be fairly

> clean and also dry, as dung or water can cause the hair roots to

> rot in transit. Seal the 20 hairs from each animal in a small

> zip-lock bag labeled with the animal's name/tag number or whatever

> you'd like the animal identified as. Ship samples with payment to;

>

> Seymour Dairy Inc

> 7580 Redberg Rd.

> Cloverdale, OR 97112

>

>

> Samples must be accompanied by payment of $30.00 per sample. Make

> checks out to Seymour Dairy Inc

> ($300 minimum required)

> Results are typically available in 3-4 wks.

> If you have any questions contact Rob at 1- 1-888-LIC-BULL

>

>

>

Guest guest
Posted



Can you breed up to A2 genetics.....or is it once you have A1 it is always there in that cow line?

Matt

A2 Testing> To: RawDairy > Date: Wednesday, April 28, 2010, 9:35 AM>> > Hey folks,> I have found a place that will do A2 testing.> The cost per animal is $30, if you have over 10 animals. If not,> the total cost is $300, regardless of the number of animals. So,> if you had five to test, it'd be $60 per cow, four to test, $75> per cow.> Anyway, I thought this was no longer available, and am excited I> found it. Rob said it takes 6-8 weeks, but here is the actual form> to print and fill out.> Best Wishes!>>> A2 Testing>> Sender's Information> Name: ____________ _________ _________ _____> Address_____ _________ _________ _________ __ City: ____________> _________ ________ State: ___________ Zip: _________> Phone: ____________ ________ Cell: ____________ _________> _________ FAX_________ _________> E-mail address: ____________ _________ _________ _________ _________> Are you a current user of LIC Sires? __________ would you like to> be included on our mailing list? (Receive Green to Gold magazine,> Sire Directory and other information) ____________ ________> Preferred method of receiving results? Mail, FAX or email> ____________ _________ ___>> Instructions: A hair sample is required for A2 testing. Pull a> bunch of (roughly) 20 tail hairs from the switch of the cow's> tail. It's important to make sure the hairs are pulled out and not> cut off, as we're after the hair root. The hair needs to be fairly> clean and also dry, as dung or water can cause the hair roots to> rot in transit. Seal the 20 hairs from each animal in a small> zip-lock bag labeled with the animal's name/tag number or whatever> you'd like the animal identified as. Ship samples with payment to;>> Seymour Dairy Inc> 7580 Redberg Rd.> Cloverdale, OR 97112>>> Samples must be accompanied by payment of $30.00 per sample. Make> checks out to Seymour Dairy Inc> ($300 minimum required)> Results are typically available in 3-4 wks.> If you have any questions contact Rob at 1- 1-888-LIC-BULL>>>

Guest guest
Posted



Can you breed up to A2 genetics.....or is it once you have A1 it is always there in that cow line?

Matt

A2 Testing> To: RawDairy > Date: Wednesday, April 28, 2010, 9:35 AM>> > Hey folks,> I have found a place that will do A2 testing.> The cost per animal is $30, if you have over 10 animals. If not,> the total cost is $300, regardless of the number of animals. So,> if you had five to test, it'd be $60 per cow, four to test, $75> per cow.> Anyway, I thought this was no longer available, and am excited I> found it. Rob said it takes 6-8 weeks, but here is the actual form> to print and fill out.> Best Wishes!>>> A2 Testing>> Sender's Information> Name: ____________ _________ _________ _____> Address_____ _________ _________ _________ __ City: ____________> _________ ________ State: ___________ Zip: _________> Phone: ____________ ________ Cell: ____________ _________> _________ FAX_________ _________> E-mail address: ____________ _________ _________ _________ _________> Are you a current user of LIC Sires? __________ would you like to> be included on our mailing list? (Receive Green to Gold magazine,> Sire Directory and other information) ____________ ________> Preferred method of receiving results? Mail, FAX or email> ____________ _________ ___>> Instructions: A hair sample is required for A2 testing. Pull a> bunch of (roughly) 20 tail hairs from the switch of the cow's> tail. It's important to make sure the hairs are pulled out and not> cut off, as we're after the hair root. The hair needs to be fairly> clean and also dry, as dung or water can cause the hair roots to> rot in transit. Seal the 20 hairs from each animal in a small> zip-lock bag labeled with the animal's name/tag number or whatever> you'd like the animal identified as. Ship samples with payment to;>> Seymour Dairy Inc> 7580 Redberg Rd.> Cloverdale, OR 97112>>> Samples must be accompanied by payment of $30.00 per sample. Make> checks out to Seymour Dairy Inc> ($300 minimum required)> Results are typically available in 3-4 wks.> If you have any questions contact Rob at 1- 1-888-LIC-BULL>>>

Guest guest
Posted

A cow or bull can be homozygous (two copies of the gene) or heterozygous for the gene (one copy of each). That is A1A1, A2A2, or A1A2. Each parent is going to throw one copy of the gene to the calf. If both parents are A1A1, the calf will be A1A1. If both parents are A2A2, the calf will be A2A2. If one parent is A1A1 and one parent is A1A2, the calf could be A1A1, or A1A2. It could not be (homozyogous) A2A2, because one parent has no A2 gene to give to the calf. If both parents are (heterozygous) A1A2, you could end up with an (homozygous) A1A1 or A2A2 calf, or it could be (heterozygous) A1A2..marion To: RawDairy From: goatmilk@...Date: Mon, 3 May 2010 08:51:43 -0400Subject: Re: A2 Testing  Can you breed up to A2 genetics.....or is it once you have A1 it is always there in that cow line? Matt A2 Testing> To: RawDairy > Date: Wednesday, April 28, 2010, 9:35 AM>> > Hey folks,> I have found a place that will do A2 testing.> The cost per animal is $30, if you have over 10 animals. If not,> the total cost is $300, regardless of the number of animals. So,> if you had five to test, it'd be $60 per cow, four to test, $75> per cow.> Anyway, I thought this was no longer available, and am excited I> found it. Rob said it takes 6-8 weeks, but here is the actual form> to print and fill out.> Best Wishes!>>> A2 Testing>> Sender's Information> Name: ____________ _________ _________ _____> Address_____ _________ _________ _________ __ City: ____________> _________ ________ State: ___________ Zip: _________> Phone: ____________ ________ Cell: ____________ _________> _________ FAX_________ _________> E-mail address: ____________ _________ _________ _________ _________> Are you a current user of LIC Sires? __________ would you like to> be included on our mailing list? (Receive Green to Gold magazine,> Sire Directory and other information) ____________ ________> Preferred method of receiving results? Mail, FAX or email> ____________ _________ ___>> Instructions: A hair sample is required for A2 testing. Pull a> bunch of (roughly) 20 tail hairs from the switch of the cow's> tail. It's important to make sure the hairs are pulled out and not> cut off, as we're after the hair root. The hair needs to be fairly> clean and also dry, as dung or water can cause the hair roots to> rot in transit. Seal the 20 hairs from each animal in a small> zip-lock bag labeled with the animal's name/tag number or whatever> you'd like the animal identified as. Ship samples with payment to;>> Seymour Dairy Inc> 7580 Redberg Rd.> Cloverdale, OR 97112>>> Samples must be accompanied by payment of $30.00 per sample. Make> checks out to Seymour Dairy Inc> ($300 minimum required)> Results are typically available in 3-4 wks.> If you have any questions contact Rob at 1- 1-888-LIC-BULL>>> Live connected. Get Hotmail Messenger for mobile.

Guest guest
Posted

A cow or bull can be homozygous (two copies of the gene) or heterozygous for the gene (one copy of each). That is A1A1, A2A2, or A1A2. Each parent is going to throw one copy of the gene to the calf. If both parents are A1A1, the calf will be A1A1. If both parents are A2A2, the calf will be A2A2. If one parent is A1A1 and one parent is A1A2, the calf could be A1A1, or A1A2. It could not be (homozyogous) A2A2, because one parent has no A2 gene to give to the calf. If both parents are (heterozygous) A1A2, you could end up with an (homozygous) A1A1 or A2A2 calf, or it could be (heterozygous) A1A2..marion To: RawDairy From: goatmilk@...Date: Mon, 3 May 2010 08:51:43 -0400Subject: Re: A2 Testing  Can you breed up to A2 genetics.....or is it once you have A1 it is always there in that cow line? Matt A2 Testing> To: RawDairy > Date: Wednesday, April 28, 2010, 9:35 AM>> > Hey folks,> I have found a place that will do A2 testing.> The cost per animal is $30, if you have over 10 animals. If not,> the total cost is $300, regardless of the number of animals. So,> if you had five to test, it'd be $60 per cow, four to test, $75> per cow.> Anyway, I thought this was no longer available, and am excited I> found it. Rob said it takes 6-8 weeks, but here is the actual form> to print and fill out.> Best Wishes!>>> A2 Testing>> Sender's Information> Name: ____________ _________ _________ _____> Address_____ _________ _________ _________ __ City: ____________> _________ ________ State: ___________ Zip: _________> Phone: ____________ ________ Cell: ____________ _________> _________ FAX_________ _________> E-mail address: ____________ _________ _________ _________ _________> Are you a current user of LIC Sires? __________ would you like to> be included on our mailing list? (Receive Green to Gold magazine,> Sire Directory and other information) ____________ ________> Preferred method of receiving results? Mail, FAX or email> ____________ _________ ___>> Instructions: A hair sample is required for A2 testing. Pull a> bunch of (roughly) 20 tail hairs from the switch of the cow's> tail. It's important to make sure the hairs are pulled out and not> cut off, as we're after the hair root. The hair needs to be fairly> clean and also dry, as dung or water can cause the hair roots to> rot in transit. Seal the 20 hairs from each animal in a small> zip-lock bag labeled with the animal's name/tag number or whatever> you'd like the animal identified as. Ship samples with payment to;>> Seymour Dairy Inc> 7580 Redberg Rd.> Cloverdale, OR 97112>>> Samples must be accompanied by payment of $30.00 per sample. Make> checks out to Seymour Dairy Inc> ($300 minimum required)> Results are typically available in 3-4 wks.> If you have any questions contact Rob at 1- 1-888-LIC-BULL>>> Live connected. Get Hotmail Messenger for mobile.

Guest guest
Posted

A cow or bull can be homozygous (two copies of the gene) or heterozygous for the gene (one copy of each). That is A1A1, A2A2, or A1A2. Each parent is going to throw one copy of the gene to the calf. If both parents are A1A1, the calf will be A1A1. If both parents are A2A2, the calf will be A2A2. If one parent is A1A1 and one parent is A1A2, the calf could be A1A1, or A1A2. It could not be (homozyogous) A2A2, because one parent has no A2 gene to give to the calf. If both parents are (heterozygous) A1A2, you could end up with an (homozygous) A1A1 or A2A2 calf, or it could be (heterozygous) A1A2..marion To: RawDairy From: goatmilk@...Date: Mon, 3 May 2010 08:51:43 -0400Subject: Re: A2 Testing  Can you breed up to A2 genetics.....or is it once you have A1 it is always there in that cow line? Matt A2 Testing> To: RawDairy > Date: Wednesday, April 28, 2010, 9:35 AM>> > Hey folks,> I have found a place that will do A2 testing.> The cost per animal is $30, if you have over 10 animals. If not,> the total cost is $300, regardless of the number of animals. So,> if you had five to test, it'd be $60 per cow, four to test, $75> per cow.> Anyway, I thought this was no longer available, and am excited I> found it. Rob said it takes 6-8 weeks, but here is the actual form> to print and fill out.> Best Wishes!>>> A2 Testing>> Sender's Information> Name: ____________ _________ _________ _____> Address_____ _________ _________ _________ __ City: ____________> _________ ________ State: ___________ Zip: _________> Phone: ____________ ________ Cell: ____________ _________> _________ FAX_________ _________> E-mail address: ____________ _________ _________ _________ _________> Are you a current user of LIC Sires? __________ would you like to> be included on our mailing list? (Receive Green to Gold magazine,> Sire Directory and other information) ____________ ________> Preferred method of receiving results? Mail, FAX or email> ____________ _________ ___>> Instructions: A hair sample is required for A2 testing. Pull a> bunch of (roughly) 20 tail hairs from the switch of the cow's> tail. It's important to make sure the hairs are pulled out and not> cut off, as we're after the hair root. The hair needs to be fairly> clean and also dry, as dung or water can cause the hair roots to> rot in transit. Seal the 20 hairs from each animal in a small> zip-lock bag labeled with the animal's name/tag number or whatever> you'd like the animal identified as. Ship samples with payment to;>> Seymour Dairy Inc> 7580 Redberg Rd.> Cloverdale, OR 97112>>> Samples must be accompanied by payment of $30.00 per sample. Make> checks out to Seymour Dairy Inc> ($300 minimum required)> Results are typically available in 3-4 wks.> If you have any questions contact Rob at 1- 1-888-LIC-BULL>>> Live connected. Get Hotmail Messenger for mobile.

Guest guest
Posted



so it sounds like if you only breed to A2 bulls eventually you will convert your herd over to 100% A2.

That is good to know.

thanks

matt

A2 Testing> To: RawDairy > Date: Wednesday, April 28, 2010, 9:35 AM>> > Hey folks,> I have found a place that will do A2 testing.> The cost per animal is $30, if you have over 10 animals. If not,> the total cost is $300, regardless of the number of animals. So,> if you had five to test, it'd be $60 per cow, four to test, $75> per cow.> Anyway, I thought this was no longer available, and am excited I> found it. Rob said it takes 6-8 weeks, but here is the actual form> to print and fill out.> Best Wishes!>>> A2 Testing>> Sender's Information> Name: ____________ _________ _________ _____> Address_____ _________ _________ _________ __ City: ____________> _________ ________ State: ___________ Zip: _________> Phone: ____________ ________ Cell: ____________ _________> _________ FAX_________ _________> E-mail address: ____________ _________ _________ _________ _________> Are you a current user of LIC Sires? __________ would you like to> be included on our mailing list? (Receive Green to Gold magazine,> Sire Directory and other information) ____________ ________> Preferred method of receiving results? Mail, FAX or email> ____________ _________ ___>> Instructions: A hair sample is required for A2 testing. Pull a> bunch of (roughly) 20 tail hairs from the switch of the cow's> tail. It's important to make sure the hairs are pulled out and not> cut off, as we're after the hair root. The hair needs to be fairly> clean and also dry, as dung or water can cause the hair roots to> rot in transit. Seal the 20 hairs from each animal in a small> zip-lock bag labeled with the animal's name/tag number or whatever> you'd like the animal identified as. Ship samples with payment to;>> Seymour Dairy Inc> 7580 Redberg Rd.> Cloverdale, OR 97112>>> Samples must be accompanied by payment of $30.00 per sample. Make> checks out to Seymour Dairy Inc> ($300 minimum required)> Results are typically available in 3-4 wks.> If you have any questions contact Rob at 1- 1-888-LIC-BULL>>>

Live connected. Get Hotmail Messenger for mobile.

Guest guest
Posted



so it sounds like if you only breed to A2 bulls eventually you will convert your herd over to 100% A2.

That is good to know.

thanks

matt

A2 Testing> To: RawDairy > Date: Wednesday, April 28, 2010, 9:35 AM>> > Hey folks,> I have found a place that will do A2 testing.> The cost per animal is $30, if you have over 10 animals. If not,> the total cost is $300, regardless of the number of animals. So,> if you had five to test, it'd be $60 per cow, four to test, $75> per cow.> Anyway, I thought this was no longer available, and am excited I> found it. Rob said it takes 6-8 weeks, but here is the actual form> to print and fill out.> Best Wishes!>>> A2 Testing>> Sender's Information> Name: ____________ _________ _________ _____> Address_____ _________ _________ _________ __ City: ____________> _________ ________ State: ___________ Zip: _________> Phone: ____________ ________ Cell: ____________ _________> _________ FAX_________ _________> E-mail address: ____________ _________ _________ _________ _________> Are you a current user of LIC Sires? __________ would you like to> be included on our mailing list? (Receive Green to Gold magazine,> Sire Directory and other information) ____________ ________> Preferred method of receiving results? Mail, FAX or email> ____________ _________ ___>> Instructions: A hair sample is required for A2 testing. Pull a> bunch of (roughly) 20 tail hairs from the switch of the cow's> tail. It's important to make sure the hairs are pulled out and not> cut off, as we're after the hair root. The hair needs to be fairly> clean and also dry, as dung or water can cause the hair roots to> rot in transit. Seal the 20 hairs from each animal in a small> zip-lock bag labeled with the animal's name/tag number or whatever> you'd like the animal identified as. Ship samples with payment to;>> Seymour Dairy Inc> 7580 Redberg Rd.> Cloverdale, OR 97112>>> Samples must be accompanied by payment of $30.00 per sample. Make> checks out to Seymour Dairy Inc> ($300 minimum required)> Results are typically available in 3-4 wks.> If you have any questions contact Rob at 1- 1-888-LIC-BULL>>>

Live connected. Get Hotmail Messenger for mobile.

Guest guest
Posted



so it sounds like if you only breed to A2 bulls eventually you will convert your herd over to 100% A2.

That is good to know.

thanks

matt

A2 Testing> To: RawDairy > Date: Wednesday, April 28, 2010, 9:35 AM>> > Hey folks,> I have found a place that will do A2 testing.> The cost per animal is $30, if you have over 10 animals. If not,> the total cost is $300, regardless of the number of animals. So,> if you had five to test, it'd be $60 per cow, four to test, $75> per cow.> Anyway, I thought this was no longer available, and am excited I> found it. Rob said it takes 6-8 weeks, but here is the actual form> to print and fill out.> Best Wishes!>>> A2 Testing>> Sender's Information> Name: ____________ _________ _________ _____> Address_____ _________ _________ _________ __ City: ____________> _________ ________ State: ___________ Zip: _________> Phone: ____________ ________ Cell: ____________ _________> _________ FAX_________ _________> E-mail address: ____________ _________ _________ _________ _________> Are you a current user of LIC Sires? __________ would you like to> be included on our mailing list? (Receive Green to Gold magazine,> Sire Directory and other information) ____________ ________> Preferred method of receiving results? Mail, FAX or email> ____________ _________ ___>> Instructions: A hair sample is required for A2 testing. Pull a> bunch of (roughly) 20 tail hairs from the switch of the cow's> tail. It's important to make sure the hairs are pulled out and not> cut off, as we're after the hair root. The hair needs to be fairly> clean and also dry, as dung or water can cause the hair roots to> rot in transit. Seal the 20 hairs from each animal in a small> zip-lock bag labeled with the animal's name/tag number or whatever> you'd like the animal identified as. Ship samples with payment to;>> Seymour Dairy Inc> 7580 Redberg Rd.> Cloverdale, OR 97112>>> Samples must be accompanied by payment of $30.00 per sample. Make> checks out to Seymour Dairy Inc> ($300 minimum required)> Results are typically available in 3-4 wks.> If you have any questions contact Rob at 1- 1-888-LIC-BULL>>>

Live connected. Get Hotmail Messenger for mobile.

Guest guest
Posted

I think we could cut it down to 5 years using embryo transfer. Were going to use

two of our best

A2A2 cows and flush them to the best A2A2 bulls

and use those embryos in our A1A2 and A1A1 cows. By doing this only A2A2 calves

will be born. In 5 years you should have better then 90 percent

A2A2 herd.

Re: A2 Testing

?

If your bull genetics are all homozyg. A2 and youare using your heifers that are

bred from homoz. A2 you would be diluting the A1 genetics and eventually would

eliminate them. although it may take more then a life time. So I am thinking

if you tested and then culled your A1 heifers........you should be able to breed

up fairly quickly...........or just milk goats and sheep and be done with it! ;)

Matt

Cranberry Ridge Farm

RE: A2 Testing

Hi, Of course, using homozygous A2 bulls would get you there faster. But that A1

gene could carry on down, and you wouldnt know which heifers to se

Guest guest
Posted

I think we could cut it down to 5 years using embryo transfer. Were going to use

two of our best

A2A2 cows and flush them to the best A2A2 bulls

and use those embryos in our A1A2 and A1A1 cows. By doing this only A2A2 calves

will be born. In 5 years you should have better then 90 percent

A2A2 herd.

Re: A2 Testing

?

If your bull genetics are all homozyg. A2 and youare using your heifers that are

bred from homoz. A2 you would be diluting the A1 genetics and eventually would

eliminate them. although it may take more then a life time. So I am thinking

if you tested and then culled your A1 heifers........you should be able to breed

up fairly quickly...........or just milk goats and sheep and be done with it! ;)

Matt

Cranberry Ridge Farm

RE: A2 Testing

Hi, Of course, using homozygous A2 bulls would get you there faster. But that A1

gene could carry on down, and you wouldnt know which heifers to se

Guest guest
Posted

I think we could cut it down to 5 years using embryo transfer. Were going to use

two of our best

A2A2 cows and flush them to the best A2A2 bulls

and use those embryos in our A1A2 and A1A1 cows. By doing this only A2A2 calves

will be born. In 5 years you should have better then 90 percent

A2A2 herd.

Re: A2 Testing

?

If your bull genetics are all homozyg. A2 and youare using your heifers that are

bred from homoz. A2 you would be diluting the A1 genetics and eventually would

eliminate them. although it may take more then a life time. So I am thinking

if you tested and then culled your A1 heifers........you should be able to breed

up fairly quickly...........or just milk goats and sheep and be done with it! ;)

Matt

Cranberry Ridge Farm

RE: A2 Testing

Hi, Of course, using homozygous A2 bulls would get you there faster. But that A1

gene could carry on down, and you wouldnt know which heifers to se

Guest guest
Posted

Hi, Of course, using homozygous A2 bulls would get you there faster. But that A1 gene could carry on down, and you wouldnt know which heifers to select as herd replacements, without testing..marion To: RawDairy From: goatmilk@...Date: Mon, 3 May 2010 18:06:28 -0400Subject: Re: A2 Testing  so it sounds like if you only breed to A2 bulls eventually you will convert your herd over to 100% A2. That is good to know. thanks matt A2 Testing> To: RawDairy > Date: Wednesday, April 28, 2010, 9:35 AM>> > Hey folks,> I have found a place that will do A2 testing.> The cost per animal is $30, if you have over 10 animals. If not,> the total cost is $300, regardless of the number of animals. So,> if you had five to test, it'd be $60 per cow, four to test, $75> per cow.> Anyway, I thought this was no longer available, and am excited I> found it. Rob said it takes 6-8 weeks, but here is the actual form> to print and fill out.> Best Wishes!>>> A2 Testing>> Sender's Information> Name: ____________ _________ _________ _____> Address_____ _________ _________ _________ __ City: ____________> _________ ________ State: ___________ Zip: _________> Phone: ____________ ________ Cell: ____________ _________> _________ FAX_________ _________> E-mail address: ____________ _________ _________ _________ _________> Are you a current user of LIC Sires? __________ would you like to> be included on our mailing list? (Receive Green to Gold magazine,> Sire Directory and other information) ____________ ________> Preferred method of receiving results? Mail, FAX or email> ____________ _________ ___>> Instructions: A hair sample is required for A2 testing. Pull a> bunch of (roughly) 20 tail hairs from the switch of the cow's> tail. It's important to make sure the hairs are pulled out and not> cut off, as we're after the hair root. The hair needs to be fairly> clean and also dry, as dung or water can cause the hair roots to> rot in transit. Seal the 20 hairs from each animal in a small> zip-lock bag labeled with the animal's name/tag number or whatever> you'd like the animal identified as. Ship samples with payment to;>> Seymour Dairy Inc> 7580 Redberg Rd.> Cloverdale, OR 97112>>> Samples must be accompanied by payment of $30.00 per sample. Make> checks out to Seymour Dairy Inc> ($300 minimum required)> Results are typically available in 3-4 wks.> If you have any questions contact Rob at 1- 1-888-LIC-BULL>>> Live connected. Get Hotmail Messenger for mobile. Live connected. Get Hotmail Messenger for mobile.

Guest guest
Posted

Hi, Of course, using homozygous A2 bulls would get you there faster. But that A1 gene could carry on down, and you wouldnt know which heifers to select as herd replacements, without testing..marion To: RawDairy From: goatmilk@...Date: Mon, 3 May 2010 18:06:28 -0400Subject: Re: A2 Testing  so it sounds like if you only breed to A2 bulls eventually you will convert your herd over to 100% A2. That is good to know. thanks matt A2 Testing> To: RawDairy > Date: Wednesday, April 28, 2010, 9:35 AM>> > Hey folks,> I have found a place that will do A2 testing.> The cost per animal is $30, if you have over 10 animals. If not,> the total cost is $300, regardless of the number of animals. So,> if you had five to test, it'd be $60 per cow, four to test, $75> per cow.> Anyway, I thought this was no longer available, and am excited I> found it. Rob said it takes 6-8 weeks, but here is the actual form> to print and fill out.> Best Wishes!>>> A2 Testing>> Sender's Information> Name: ____________ _________ _________ _____> Address_____ _________ _________ _________ __ City: ____________> _________ ________ State: ___________ Zip: _________> Phone: ____________ ________ Cell: ____________ _________> _________ FAX_________ _________> E-mail address: ____________ _________ _________ _________ _________> Are you a current user of LIC Sires? __________ would you like to> be included on our mailing list? (Receive Green to Gold magazine,> Sire Directory and other information) ____________ ________> Preferred method of receiving results? Mail, FAX or email> ____________ _________ ___>> Instructions: A hair sample is required for A2 testing. Pull a> bunch of (roughly) 20 tail hairs from the switch of the cow's> tail. It's important to make sure the hairs are pulled out and not> cut off, as we're after the hair root. The hair needs to be fairly> clean and also dry, as dung or water can cause the hair roots to> rot in transit. Seal the 20 hairs from each animal in a small> zip-lock bag labeled with the animal's name/tag number or whatever> you'd like the animal identified as. Ship samples with payment to;>> Seymour Dairy Inc> 7580 Redberg Rd.> Cloverdale, OR 97112>>> Samples must be accompanied by payment of $30.00 per sample. Make> checks out to Seymour Dairy Inc> ($300 minimum required)> Results are typically available in 3-4 wks.> If you have any questions contact Rob at 1- 1-888-LIC-BULL>>> Live connected. Get Hotmail Messenger for mobile. Live connected. Get Hotmail Messenger for mobile.

Guest guest
Posted

Hi, Of course, using homozygous A2 bulls would get you there faster. But that A1 gene could carry on down, and you wouldnt know which heifers to select as herd replacements, without testing..marion To: RawDairy From: goatmilk@...Date: Mon, 3 May 2010 18:06:28 -0400Subject: Re: A2 Testing  so it sounds like if you only breed to A2 bulls eventually you will convert your herd over to 100% A2. That is good to know. thanks matt A2 Testing> To: RawDairy > Date: Wednesday, April 28, 2010, 9:35 AM>> > Hey folks,> I have found a place that will do A2 testing.> The cost per animal is $30, if you have over 10 animals. If not,> the total cost is $300, regardless of the number of animals. So,> if you had five to test, it'd be $60 per cow, four to test, $75> per cow.> Anyway, I thought this was no longer available, and am excited I> found it. Rob said it takes 6-8 weeks, but here is the actual form> to print and fill out.> Best Wishes!>>> A2 Testing>> Sender's Information> Name: ____________ _________ _________ _____> Address_____ _________ _________ _________ __ City: ____________> _________ ________ State: ___________ Zip: _________> Phone: ____________ ________ Cell: ____________ _________> _________ FAX_________ _________> E-mail address: ____________ _________ _________ _________ _________> Are you a current user of LIC Sires? __________ would you like to> be included on our mailing list? (Receive Green to Gold magazine,> Sire Directory and other information) ____________ ________> Preferred method of receiving results? Mail, FAX or email> ____________ _________ ___>> Instructions: A hair sample is required for A2 testing. Pull a> bunch of (roughly) 20 tail hairs from the switch of the cow's> tail. It's important to make sure the hairs are pulled out and not> cut off, as we're after the hair root. The hair needs to be fairly> clean and also dry, as dung or water can cause the hair roots to> rot in transit. Seal the 20 hairs from each animal in a small> zip-lock bag labeled with the animal's name/tag number or whatever> you'd like the animal identified as. Ship samples with payment to;>> Seymour Dairy Inc> 7580 Redberg Rd.> Cloverdale, OR 97112>>> Samples must be accompanied by payment of $30.00 per sample. Make> checks out to Seymour Dairy Inc> ($300 minimum required)> Results are typically available in 3-4 wks.> If you have any questions contact Rob at 1- 1-888-LIC-BULL>>> Live connected. Get Hotmail Messenger for mobile. Live connected. Get Hotmail Messenger for mobile.

Guest guest
Posted



If your bull genetics are all homozyg. A2 and youare using your heifers that are bred from homoz. A2 you would be diluting the A1 genetics and eventually would eliminate them. although it may take more then a life time. So I am thinking if you tested and then culled your A1 heifers........you should be able to breed up fairly quickly...........or just milk goats and sheep and be done with it! ;)

Matt

Cranberry Ridge Farm

A2 Testing> To: RawDairy > Date: Wednesday, April 28, 2010, 9:35 AM>> > Hey folks,> I have found a place that will do A2 testing.> The cost per animal is $30, if you have over 10 animals. If not,> the total cost is $300, regardless of the number of animals. So,> if you had five to test, it'd be $60 per cow, four to test, $75> per cow.> Anyway, I thought this was no longer available, and am excited I> found it. Rob said it takes 6-8 weeks, but here is the actual form> to print and fill out.> Best Wishes!>>> A2 Testing>> Sender's Information> Name: ____________ _________ _________ _____> Address_____ _________ _________ _________ __ City: ____________> _________ ________ State: ___________ Zip: _________> Phone: ____________ ________ Cell: ____________ _________> _________ FAX_________ _________> E-mail address: ____________ _________ _________ _________ _________> Are you a current user of LIC Sires? __________ would you like to> be included on our mailing list? (Receive Green to Gold magazine,> Sire Directory and other information) ____________ ________> Preferred method of receiving results? Mail, FAX or email> ____________ _________ ___>> Instructions: A hair sample is required for A2 testing. Pull a> bunch of (roughly) 20 tail hairs from the switch of the cow's> tail. It's important to make sure the hairs are pulled out and not> cut off, as we're after the hair root. The hair needs to be fairly> clean and also dry, as dung or water can cause the hair roots to> rot in transit. Seal the 20 hairs from each animal in a small> zip-lock bag labeled with the animal's name/tag number or whatever> you'd like the animal identified as. Ship samples with payment to;>> Seymour Dairy Inc> 7580 Redberg Rd.> Cloverdale, OR 97112>>> Samples must be accompanied by payment of $30.00 per sample. Make> checks out to Seymour Dairy Inc> ($300 minimum required)> Results are typically available in 3-4 wks.> If you have any questions contact Rob at 1- 1-888-LIC-BULL>>>

Live connected. Get Hotmail Messenger for mobile.

Live connected. Get Hotmail Messenger for mobile.

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...