Guest guest Posted September 20, 2010 Report Share Posted September 20, 2010 When I read about 's protocol (P3+Cz P4+Cz) I thought he was rewarding 12-15hz amplitude, thus possibly decreasing the 12-15hz coherence, and/or encouraging the parietal lobes to have different 12-15hz amplitude than the SMC and/or medial cingulate. Quite a bit different than increasing 12-15hz coherence between the parietal lobes & SMC and/or cingulate. But I guess that's probably not the case since increasing coherence with bipolar placements would be telling the brain to do... I have no idea but it sounds interesting. I'll have to try it on myself. Thanks for sharing, Bill > > Hi JW, > > I use the TT Infiniti system but I have the software used by the BM. So you can use that alright. > You do not do one channel first and then another. So you need a two channel system. > If you don't have such system do not do anything. Both, left and right sides, have to be working > at the same time so that you can have a good coherence between left/right sides. > > So if you have a two channel system, connect P3+Cz to one channel and then the P4+Cz to another. > Use a 2 channel setup from the BM and choose the 12-15Hz (or the SMR setup) up. > Do it for just 12-15 minutes (no more). > > Bye for now, > > > ------- > Prof.Dr. Alvoeiro,Ph.D.(Hull,UK),C.Psychol.(BPS,UK) > > 2000-119 Santarem, > Portugal > E-mail: jorge.alvoeiro@... > http://cienciacognitiva.planetaclix.pt/ > > > ________________________________ > > De: em nome de st4rcycle > Enviada: sex 9/17/2010 19:18 > Para: > Assunto: 's Coherence Protocol > > > > Okay - I think I have this designed right, but would just like to run it by everyone to make sure it looks okay. > > I have two Sources (1 for each channel) both going into a single Coherence object set to 12-15Hz. > > The Coherence goes into a Threshold object, which is set for increase. 75 percent reward seemed reasonable. > > Then the threshold simply goes out to DVD or midi reward bell. Very simple. > > I don't have a Y cable, so I thought I would just use two electrodes as close to Cz as possible, and link them with the linked reference cable. > > If that approach is not recommended or correct, my other thought was to do the same basic design but as single channel training, training P3+Cz for a while, and then just switching the active electrode to P4 for a while. > > Comments? > > thank you, > JW > > > > ------------------------------------ > > Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.