Basic hook-up question

[Guest guest]

Dear group members who work with the TLC designs and the Pendant:

I can use a little beginner's training help:

The pendant has inputs ( " holes " ) that are labelled as follows:

2- 2+ N 1- 1+

So, first: For this training recommendation:

T4/A2 1 channel 1 inhibit 12-38 Hz

For the design that corresponds to this, there is one active at T4 and a

reference at the right ear (A2) and you use the left ear (A1) for the ground?

Just three electrodes? So the ground goes in the middle hole in the pendant,

right? the one that says " N " ? And in which holes should I put the active and the

reference? Thanks.

And then, in this training recommendation:

F4/A2/g/C4/A2 2C windowed squash (10-15Hz), where I'm using

this design:

2C Windowed Squash Eyes closed

I'm assuming I'm putting the ground in the middle, " N " , again (and it's leading

to the left ear). And then the right ear, A2, is the reference, and that's in

the hole called 2+, and then a linking jumper cable is stuck in the 1+ with no

electrode coming out of it. And then I have two actives, one at F4 and one at

C4, and those are plugged into the holes that are labelled 1- and 2-. Is this

correct?

I never saw instructions that came with the Pendant about which electrodes

(actives, references, grounds) go in which inputs.

Thank you!

Liz Margoshes, making progress with BE and TLC