Guest guest Posted March 4, 2006 Report Share Posted March 4, 2006 Tamson, When you are training two sites in relation to each other, or want to compare results from two sites, you don't want the signal affected by a biased reference. Usually then you use linked ears, although for prefrontal balance training you would use Cz as the reference for both channels. Foxx -----Original Message-----From: [mailto: ] On Behalf Of foxmavenSent: Friday, March 03, 2006 11:13 PM Subject: Linked earsI know that using the jumper to link the references adds the two sides together and eliminates the differences that may be picked up (from the temporal lobes). What I'm not clear about (or cannot remember) is why that would be preferred or necessary in some protocols and not in others. I am still not able to answer for myself the reason to link or not link the references. Thanks.Tamson Quote Link to comment Share on other sites More sharing options...
Guest guest Posted March 4, 2006 Report Share Posted March 4, 2006 Thanks, Foxx! I know Pete taught that in the workshop, but somehow that one did not make it into my notes (along with other things, I’m sure!). It’s good to have that cleared up again. J From: [mailto: ] On Behalf Of Foxx Sent: Saturday, March 04, 2006 11:37 AM Subject: RE: Linked ears Tamson, When you are training two sites in relation to each other, or want to compare results from two sites, you don't want the signal affected by a biased reference. Usually then you use linked ears, although for prefrontal balance training you would use Cz as the reference for both channels. Foxx Linked ears I know that using the jumper to link the references adds the two sides together and eliminates the differences that may be picked up (from the temporal lobes). What I'm not clear about (or cannot remember) is why that would be preferred or necessary in some protocols and not in others. I am still not able to answer for myself the reason to link or not link the references. Thanks. Tamson -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 268.1.2/274 - Release Date: 3/3/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 268.1.2/274 - Release Date: 3/3/2006 Quote Link to comment Share on other sites More sharing options...
Guest guest Posted May 30, 2006 Report Share Posted May 30, 2006 Betsy, When you do an assessment, you are measuring channel 1 against one reference and channel 2 against another reference. We use " inert " references, like the earlobes or the mastoid, because we want the two references to be equal, so whatever difference we see in the signals is reflecting what is happening at the Active site. Of course we know that we're wrong in assuming that those sites are inert. They pick up signals from the activity that " leaks " out through the skull from the parts of the brain closest to them (i.e. the temporal). Hence, when we use A1 and A2 or M1 and M2 as references, we are actually comparing the actives against pale representations of the temporal lobes. The temporals, because they are furthest apart of the homologous/mirror sites we look at, because they have very different functions and because they are very susceptible to head injuries, often have very different signals. SO, if we have, let's say, F3 signal of 20u and F4 signal of 20u, and A1 is picking up 2u from the left temporals while A2 is picking up 4u from the right temporals, when we look at the signals in the assessment for F3 (20-2=18) and F4 (20-4=16), we could be fooled into thinking that there is a difference between the two frontal sites. If, on the other hand, we use jumper to combine the two references, then both F3 and F4 are being compared against the combined signal, which we KNOW is exactly the same for both sides, and any differences we see are surely related to what is happening at the active site. As for why I suggested you use A1 or M1 as a reference for Fz in a two channel protocol...I didn't. I suggested that you use a linked ear reference, so Fz would be reading the midline, not toward either side of the brain. Hope this helps. Pete > > From: " Strawderman " <straw856@...> > Date: 2006/05/30 Tue AM 07:51:10 EDT > " Van Deusen " <pvdtlc@...> > Subject: Linked ears > I'm still not sure I understand exactly what is accomplished by linking ears. I know you recommend that we link ears when conducting assessments. Would you please explain this further? Also, I don't understand why you suggested that I reference FZ to A1, rather than referencing both Fp2 and FZ to A2. Would you please help me understand this, too? Quote Link to comment Share on other sites More sharing options...
Guest guest Posted May 30, 2006 Report Share Posted May 30, 2006 Is there a risk that all training turns into temporal training with this approach? > > Betsy, > > When you do an assessment, you are measuring channel 1 against one reference and channel 2 against another reference. We use " inert " references, like the earlobes or the mastoid, because we want the two references to be equal, so whatever difference we see in the signals is reflecting what is happening at the Active site. > > Of course we know that we're wrong in assuming that those sites are inert. They pick up signals from the activity that " leaks " out through the skull from the parts of the brain closest to them (i.e. the temporal). Hence, when we use A1 and A2 or M1 and M2 as references, we are actually comparing the actives against pale representations of the temporal lobes. > > The temporals, because they are furthest apart of the homologous/mirror sites we look at, because they have very different functions and because they are very susceptible to head injuries, often have very different signals. > > SO, if we have, let's say, F3 signal of 20u and F4 signal of 20u, and A1 is picking up 2u from the left temporals while A2 is picking up 4u from the right temporals, when we look at the signals in the assessment for F3 (20-2=18) and F4 (20-4=16), we could be fooled into thinking that there is a difference between the two frontal sites. > > If, on the other hand, we use jumper to combine the two references, then both F3 and F4 are being compared against the combined signal, which we KNOW is exactly the same for both sides, and any differences we see are surely related to what is happening at the active site. > > As for why I suggested you use A1 or M1 as a reference for Fz in a two channel protocol...I didn't. I suggested that you use a linked ear reference, so Fz would be reading the midline, not toward either side of the brain. > > Hope this helps. > > Pete > > > > > > From: " Strawderman " <straw856@...> > > Date: 2006/05/30 Tue AM 07:51:10 EDT > > " Van Deusen " <pvdtlc@...> > > Subject: Linked ears > > > I'm still not sure I understand exactly what is accomplished by linking ears. I know you recommend that we link ears when conducting assessments. Would you please explain this further? > > Also, I don't understand why you suggested that I reference FZ to A1, rather than referencing both Fp2 and FZ to A2. Would you please help me understand this, too? > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted November 14, 2011 Report Share Posted November 14, 2011 Morena,I'm sorrry. I've never used the J & J, though I know they decided to use electrode connectors different from the rest of the known universe. Looking on their website, I see that you can purchase a cable called the TP-60 for a mere $75/channel (http://www.jjengineering.com/C2cables.htm ) that will you use regular electrodes. Then you could use regular jumpers (in fact you'd need to use several of them, since the adaptor has a ground for each channel. You could do a 2-channel assessment with a jumper between CH1 and CH2 references, and you could either use two separate ground electrodes, or you could jumper the grounds with a second jumper. Doing 4 channels will be a bit more complicated, since you'd have to jumper channels 1 and 3 and then jumper 2 and 4, then jumper the two jumpers (and do the same thing again for the grounds unless you wanted to place 4 ground electrodes.) Pete-- Van Deusenpvdtlc@...http://www.brain-trainer.comUSA 305 433 3160BR 47 3346 6235 The Learning Curve, Inc. On Mon, Nov 14, 2011 at 2:16 PM, morena <morena.ploner@...> wrote: Hallo, I want to do Tlc 4 Channel Assessment(or at least 2 CH) with Bioexplorer.The problem is, with the original electrodes of the J & J C2+ amplifier, that i have to use, I cannot use jumpers to link ears. Is there a way to link it and do the assessment correctly on command of the bioexplorer software? friendly greetings, Morena Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.