] Bioexplorer Setup problem

[Guest guest]

Bob,

Don't change the baud rates. You may need to check the Control

Panel/System/Hardware/Device Manager/Ports to make sure you have the appropriate

port (the one where the computer has Brainmaster, which may be a COM port or may

be a USB/Serial adaptor, depending on your computer). If you are using an

adaptor, you may also have aproblem with the adaptor itself.

Pete

>

> From: " shack915 " <shack915@...>

> Date: 2005/01/04 Tue AM 11:21:18 EST

>

> Subject: Bioexplorer Setup problem

>

> In trying to run my first session with Brainmaster/Bioexplorer, the

Bioexplorer program does not get past the " connecting " phase. I have

tried different baud rates but I still dont get a signal. I have

gone back to the Brainmaser software and I get a signal with that. I

have tried rebooting with the BM on. Any ideas?

Bob