Re: Silvergen Sg6 CS maker

[Guest guest]

Thanks I added that to my Beck devices list

http://freedomfromhiv.blogspot.com/

I want to add that one thing I like to do to my bottle of Coloidal Silver once I

have made 2 quarts is that I expose the bottle to the 528 frequency of love and

DNA repair using the free 'Solfeggio Bliss Frequency Generator demo' which I

downloaded online.

I also write an intention on a piece of paper and stick it to the bottom of the

bottle- ie " this coloidal silver water will kill anything unwanted in my body

and purify me and keep me well. I am grateful for its effect on my body.

Thankyou Universe for this gift "

It seems the site to download this is gone now but I found this other free prog

http://www.nch.com.au/tonegen/index.html?gclid=COK7w9apgqECFQ4-egodXAShuQ

So why bother with this? well we are mostly water and as you can see here

http://www.youtube.com/watch?v=oCmGjD9j9bU everything is sound, even thoughts,

and to use intent and sound on our CS is to hold the most potent liquid we have

on this planet.

To you health!

Nick

>

> I have had mine for many years and made lots of perfectly clear CS with it.

Here are some highlights of the way this unit makes good CS and solves some of

the problems of CS-making and automates it somewhat.

>

> 1. use distilled water for all batches

> 2. save part of previous batch for making next batch quicker, just add more

distilled water, the silver from the previous batch will " seed " the water and

make it work faster

> 3. clean off electrodes after each use with tissue paper to remove most of the

black oxide on the silver strips

> 4. silvergen uses thin flat strips instead of rods to make smaller particles

by sintering off a flat surface instead of a curving one.

> 5. constant current, with preset cut off at given silver concentration, cannot

overdo it, the unit senses concentration and stops the current.

> 6. stirring motor works during whole process, you don't need to stir.

> 7. CS can be set for 5-20 ppm approximately. At 10ppm, mine is still crystal

clear without any coloration at all.

>

> I have used it for many things, it always works on germs it can reach.

> bG

>

[Guest guest]

oh I just realised the 'Solgeggio Bliss Frequency Generator' is not downloadable

online any more so I found you this other free program instead

http://www.nch.com.au/tonegen/index.html?gclid=COK7w9apgqECFQ4-egodXAShuQ

Cheers

Nick

>

> I have had mine for many years and made lots of perfectly clear CS with it.

Here are some highlights of the way this unit makes good CS and solves some of

the problems of CS-making and automates it somewhat.

>

> 1. use distilled water for all batches

> 2. save part of previous batch for making next batch quicker, just add more

distilled water, the silver from the previous batch will " seed " the water and

make it work faster

> 3. clean off electrodes after each use with tissue paper to remove most of the

black oxide on the silver strips

> 4. silvergen uses thin flat strips instead of rods to make smaller particles

by sintering off a flat surface instead of a curving one.

> 5. constant current, with preset cut off at given silver concentration, cannot

overdo it, the unit senses concentration and stops the current.

> 6. stirring motor works during whole process, you don't need to stir.

> 7. CS can be set for 5-20 ppm approximately. At 10ppm, mine is still crystal

clear without any coloration at all.

>

> I have used it for many things, it always works on germs it can reach.

> bG

>

[Guest guest]

CS will kill anything like a virus such as HIV, but only if can reach it. You

should think about ways to get it into the tough places such as the gut.

The Germans right now are inhaling it via an ultrasonic nebulizer, which

introduces it to the bloodstream directly via the lungs and avoids the digestive

tract where a lot is lost. Digestion will treat CS as a toxin or invader and

remove a lot of it before it can build up in the blood. This method might do

nothing, but you never know.

bG

> >

> > I have had mine for many years and made lots of perfectly clear CS with it.

Here are some highlights of the way this unit makes good CS and solves some of

the problems of CS-making and automates it somewhat.

> >

> > 1. use distilled water for all batches

> > 2. save part of previous batch for making next batch quicker, just add more

distilled water, the silver from the previous batch will " seed " the water and

make it work faster

> > 3. clean off electrodes after each use with tissue paper to remove most of

the black oxide on the silver strips

> > 4. silvergen uses thin flat strips instead of rods to make smaller particles

by sintering off a flat surface instead of a curving one.

> > 5. constant current, with preset cut off at given silver concentration,

cannot overdo it, the unit senses concentration and stops the current.

> > 6. stirring motor works during whole process, you don't need to stir.

> > 7. CS can be set for 5-20 ppm approximately. At 10ppm, mine is still

crystal clear without any coloration at all.

> >

> > I have used it for many things, it always works on germs it can reach.

> > bG

> >

>

[Guest guest]

bG, do you still use your Sota Silver to make colloidal silver?   The silvergen SG 6 looks interesting.   I like theautomatic shutoff feature and clarity of solution.  Can this make 20 PPM?Is it worth the money?     

On Mon, Apr 12, 2010 at 7:32 PM, Baby_grand <bobluhrs@...> wrote:

 

CS will kill anything like a virus such as HIV, but only if can reach it. You should think about ways to get it into the tough places such as the gut.

The Germans right now are inhaling it via an ultrasonic nebulizer, which introduces it to the bloodstream directly via the lungs and avoids the digestive tract where a lot is lost. Digestion will treat CS as a toxin or invader and remove a lot of it before it can build up in the blood. This method might do nothing, but you never know.

bG

> >

> > I have had mine for many years and made lots of perfectly clear CS with it. Here are some highlights of the way this unit makes good CS and solves some of the problems of CS-making and automates it somewhat.

> >

> > 1. use distilled water for all batches

> > 2. save part of previous batch for making next batch quicker, just add more distilled water, the silver from the previous batch will " seed " the water and make it work faster

> > 3. clean off electrodes after each use with tissue paper to remove most of the black oxide on the silver strips

> > 4. silvergen uses thin flat strips instead of rods to make smaller particles by sintering off a flat surface instead of a curving one.

> > 5. constant current, with preset cut off at given silver concentration, cannot overdo it, the unit senses concentration and stops the current.

> > 6. stirring motor works during whole process, you don't need to stir.

> > 7. CS can be set for 5-20 ppm approximately. At 10ppm, mine is still crystal clear without any coloration at all.

> >

> > I have used it for many things, it always works on germs it can reach.

> > bG

> >

>