Guest guest Posted September 15, 2010 Report Share Posted September 15, 2010 Does your schematic look anything like this:http://www.zapper-tech.com/faq/BradOn Wed, Sep 15, 2010 at 6:39 PM, <DotsieBoo@...> wrote:    In a message dated 9/15/2010 7:20:32 P.M. Eastern Daylight Time, syenergyx3@... writes: I am already doing 3 out of 4 parts of the Beck Protocol,,1) Colloidal Silver, 2) the Magnetic Pulser, and 3) Ozonated Water.  I was attempting to build a blood pulser from directions I found on YouTube. They have provided excellent directions but I can not get the device to work. Maybe I am wrong but I spent some serious hours attempting to make the device because I was curious. This is the link to the video. http://www.youtube.com/watch?v=1YZnZmTQKPgIf you can review this for flaws, this video would be the best instructions on how to make the Beck blood pulser available.  I can't figure it out if there is a minor detail wrong in the instructions. Please take a look at the YouTube video and see if there is some detail wrong or missing. This video could be about best 'How to' on making the Beck pulser. Rich Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 15, 2010 Report Share Posted September 15, 2010 As the Beck blood electrifier is quiet expensive you could try a cheap Tens machine. I use both and find them equally effective placed from wrist to wrist, ankle to wrist and ankle to ankle using self adhesive electodes/pads.DaveFrom: "DotsieBoo@..." <DotsieBoo@...> Sent: Wed, 15 September, 2010 4:39:00 PMSubject: In a message dated 9/15/2010 7:20:32 P.M. Eastern Daylight Time, syenergyx3@... writes: I am already doing 3 out of 4 parts of the Beck Protocol,,1) Colloidal Silver, 2) the Magnetic Pulser, and 3) Ozonated Water. I was attempting to build a blood pulser from directions I found on YouTube. They have provided excellent directions but I can not get the device to work. Maybe I am wrong but I spent some serious hours attempting to make the device because I was curious. This is the link to the video. http://www.youtube.com/watch?v=1YZnZmTQKPgIf you can review this for flaws, this video would be the best instructions on how to make the Beck blood pulser available. I can't figure it out if there is a minor detail wrong in the instructions. Please take a look at the YouTube video and see if there is some detail wrong or missing. This video could be about best 'How to' on making the Beck pulser. Rich Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 15, 2010 Report Share Posted September 15, 2010 Hi,Not sure whre you are located but would be happy to get it working for you free of charge.We are in AustraliaRobK2 InstrumentsFrom: Dave <dgs.clear@...>Subject: Re: Received: Thursday, 16 September, 2010, 11:23 AM As the Beck blood electrifier is quiet expensive you could try a cheap Tens machine. I use both and find them equally effective placed from wrist to wrist, ankle to wrist and ankle to ankle using self adhesive electodes/pads.DaveFrom: "DotsieBoo@..." <DotsieBoo@...> Sent: Wed, 15 September, 2010 4:39:00 PMSubject: In a message dated 9/15/2010 7:20:32 P.M. Eastern Daylight Time, syenergyx3@... writes: I am already doing 3 out of 4 parts of the Beck Protocol,,1) Colloidal Silver, 2) the Magnetic Pulser, and 3) Ozonated Water. I was attempting to build a blood pulser from directions I found on YouTube. They have provided excellent directions but I can not get the device to work. Maybe I am wrong but I spent some serious hours attempting to make the device because I was curious. This is the link to the video. http://www.youtube.com/watch?v=1YZnZmTQKPgIf you can review this for flaws, this video would be the best instructions on how to make the Beck blood pulser available. I can't figure it out if there is a minor detail wrong in the instructions. Please take a look at the YouTube video and see if there is some detail wrong or missing. This video could be about best 'How to' on making the Beck pulser. Rich Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 15, 2010 Report Share Posted September 15, 2010 I go even cheaper with a 6 volt battery, it's the fastest, half the time needed. reverse the electrodes every 5-10 minutes and rarely need it any longer than 10-20 minutes for bloodstream. wire and cloth around it are the electrodes. I have several Beck devices, and lots of junk from the days fooling with frequencies, Beck's, 's, Rife's. The old battery is superior in my experience. bG > > As the Beck blood electrifier is quiet expensive you could try a cheap Tens > machine. I use both and find them equally effective placed from wrist to wrist, > ankle to wrist and ankle to ankle using self adhesive electodes/pads. > > Dave > > > > > > ________________________________ > From: " DotsieBoo@... " <DotsieBoo@...> > > Sent: Wed, 15 September, 2010 4:39:00 PM > Subject: > > > > > In a message dated 9/15/2010 7:20:32 P.M. Eastern Daylight Time, > syenergyx3@... writes: > I am already doing 3 out of 4 parts of the Beck Protocol,,1) Colloidal > Silver, 2) the Magnetic Pulser, and 3) Ozonated Water. I was > attempting to build a blood pulser from directions I found on YouTube. > They have provided excellent directions but I can not get the device to > work. Maybe I am wrong but I spent some serious hours attempting to > make the device because I was curious. This is the link to the video. > > >If you can review this for flaws, this video would be the best > >instructions on how to make the Beck blood pulser available. I can't > >figure it out if there is a minor detail wrong in the instructions. > >Please take a look at the YouTube video and see if there is some detail > >wrong or missing. This video could be about best 'How to' on making > >the Beck pulser. > > > >Rich > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 16, 2010 Report Share Posted September 16, 2010 Dotsie/(Rich)...not finding 'original' msg. posted (anywhere) bit~confusing, if Rich is a Group member reading here...looks like he posted on U-Tube? Nevertheless...will try to be of service and see if we can get past [gotcha], but not at home right now and not sure, how I can communicate with Rich directly (telephone/email/etc.)? Emailing me a close-up photo works-best and would likely save some time on the telephone/Internet, but I'm ready... to walk him through it, but having a cheap Harbor-Freight VOM, is helpful~ Try-> http://www.harborfreight.com/7-function-digital-multimeter-90899.html Don't laugh...if not into DIY, you need a Multi-Meter & this is a nice Meter~ and if not going DIY...buy it On-Sale and learn to measure BE & EIS-Stop? Just happened to hit it on Sale right now...past few years I gave away 50+? It's first time I have seen this (assembly) video, so hope DIY works-out, OK and (time permitting) I'm always willing to try helping members, to Test DIY! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - OK, I'm back at home now and so far see two offers to help-out, but still NO specific-answer/recommendation, for what might be keeping circuit hung-up. Oh yes...see ZILLA tracks...try to Ignore Mr. Lizard a wandering nuisance~ frequently allowed to Graze in Beck Groups...seeking Delusion-of-Grandeur, kinda feel sorry for him (the Lizard that is <G>)...might be, migrating IONS? - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Well it's ~ later and I'm back from playing Detective/(CSI)...getting evidence, which indicates suspect-ckt. ID is Beck's Original 1996 BE, without CS-ckt., also discovered Source/Web-Site went-missing as of Friday/10-SEPT-2010? I just sat through watching the U-Tube assembly-video (with frequent pause) and over-all, was impressed with original (Media) Production Efforts involved, especially the associated video of Animated Circuit-Simulation, also U-Tube! looks like he meant well...and with some close-up still-shots, would be great to still use...even if the original Web-Site/(Kit Producer)...has Skipped Town? Any-ways did find two possible glitches in assembly-detail...R3 & R4 ref/des maybe reversed, from (orig.) schematic, but both 100k value, so not-problem enough to hang-up operation, but second-suspect [R1] a 2.4-meg resistor is perhaps not connected where it belongs on pin #2 of LM-358/(maybe pin #3) which is a MAJOR [gotcha] that will stop 4-Hz Gate-Oscillator from working! Need to view Step # 7-of-25 where R1 is inserted with bottom-end to pin #2~ NOT connected to LM-358 pin #3 ..??? Note: Video scene starts @ 2:25/~? Next re-view video scene @ 2:58 where [jumper] connects to LM-358 pin #3. Hopefully this will help spot-problem and everything will start gating @ 4-Hz? Presuming no defective parts and already checked other board areas...got it! BTW: Did not see any power-switch...so may have run-down your Batteries? Let me know if you need more help, but unless LM-358 not OK...should run~ Ask if you want to add Dok's 2010 LM-334 (safe) CC $5 monitor & metering? Also how to add CS/EIS option(s) with Trode-Swap, Stir-Motor & Auto-Stop-! ON-CALL, DokDallas P.S. Back-in-April?...I started-up a new BECK Y-Group...thinking there may be mature members here (Feed-Up with SOTA high-price/obsolete-designs), that would be interests in Bob Becks (original-intention) Low-Cost...D*I*Y...? I'm Old, Grouchy, Seasoned (fully-retired) MSEE...Not Fearing Hockey Stick and looking forward to explain how Becks Bi-Phasic ION Pump/Trap Works~ which may also STIR-the-POT and demonstrate in Court why Beck used SS. Statistics Don't LIE...but Statisticians and Salesmen (frequently) try...Lying? Like-it-or-Not...IMO SOTA "SilverPulser"/(BE+CS) unit...Over-Priced/Rip-Off, when for only few $...people can build (their-very-own) Better, BE/CS Units... While Mag-Pulser not BAD...for the price, 1991 design is performance Joke~ In closing...congratulations to Mikas for his 21st Century BE unit! Not sure if Mikas is German origin, but Beck & Dok (real name) are German, so looks like may be left up to German Engineers...to carry on Beck Future? If interested in producing SUPER IGBT EMPT Generator, send private e-mail, cannot market (hardware) in USA, but have needed EM~Pulse, background~ http://en.wikipedia.org/wiki/Insulated-gate_bipolar_transistor getting cheaper! ======================================================== From: DotsieBoo@... <DotsieBoo@...>Subject: Date: Wednesday, September 15, 2010, 4:39 PM In a message dated 9/15/2010 7:20:32 P.M. Eastern Daylight Time, syenergyx3@... writes: I am already doing 3 out of 4 parts of the Beck Protocol,,1) Colloidal Silver, 2) the Magnetic Pulser, and 3) Ozonated Water. I was attempting to build a blood pulser from directions I found on YouTube. They have provided excellent directions but I can not get the device to work. Maybe I am wrong but I spent some serious hours attempting to make the device because I was curious. This is the link to the video. http://www.youtube.com/watch?v=1YZnZmTQKPgIf you can review this for flaws, this video would be the best instructions on how to make the Beck blood pulser available. I can't figure it out if there is a minor detail wrong in the instructions. Please take a look at the YouTube video and see if there is some detail wrong or missing. This video could be about best 'How to' on making the Beck pulser. Rich 1 of 1 Photo(s) Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 17, 2010 Report Share Posted September 17, 2010 I looked at that schematic and it looks very close to what I was following for instructions. I have a question on the connections of pin 3 to the LM358 chip. I appears on the referenced schematic that pin 3 is connected to 100 ohms 1/4 amp resistors to Both 27 volt Positive & Ground? Is that correct? > > > > > > > > > > > In a message dated 9/15/2010 7:20:32 P.M. Eastern Daylight Time, > > syenergyx3@... writes: > > > > I am already doing 3 out of 4 parts of the Beck Protocol,,1) Colloidal > > Silver, 2) the Magnetic Pulser, and 3) Ozonated Water. I was attempting to > > build a blood pulser from directions I found on YouTube. They have provided > > excellent directions but I can not get the device to work. Maybe I am wrong > > but I spent some serious hours attempting to make the device because I was > > curious. This is the link to the video. > > > > If you can review this for flaws, this video would be the best instructions > > on how to make the Beck blood pulser available. I can't figure it out if > > there is a minor detail wrong in the instructions. Please take a look at > > the YouTube video and see if there is some detail wrong or missing. This > > video could be about best 'How to' on making the Beck pulser. > > Rich > > > > > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 17, 2010 Report Share Posted September 17, 2010 see: 2 menu/photos for schematic and assembly photos where all connections are shown in living color. bG Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 17, 2010 Report Share Posted September 17, 2010 the 6 volt battery would work on wrist electrodes.people say it would be not enough voltage to force the current thru and go about 3x9=27 ,etc... what should the current be and what size wrist artery electrodes? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.