another thought

[Guest guest]

Dick

I dont think that would work with the camera flash not enough voltage. An

easy way to do it would be go down to your local neon sign store and get an

old neon sign transformer, they put out 12 to 15,000 volts and can make a

real nice electric discharge, You could build the spark gap into a little

glass tube or jar and then run an aqaurium pump through it into a bubble

stone, should make lots of ozone.

V

Hey, Alvin, I just had another thought.

The home-made mag pulsers that some of us have made from old camera strobes

and party strobes, brings up another idea for building a spark induced ozone

generator.

Could the leads from the capacitor to the flash tube be used to power a

spark gap inside a glass jar half filled with water? For the mag pulser we

put the coil in series with the flash tube, but maybe for this application

we would want to either go in parallel with the tube, or eliminate it

altogether.

Any thoughts?

Dick

[Guest guest]

One way to make lots of ozone with the glass jar would be to put some steel

wool in the jar and connect the neon sign transform to the steel wool, and

wrapped on the outside of the jar have some aluminum foil connected to the

other terminal of the neon sign transformer, then you could also connect two

fittings into the lid so you can connect aquarium tubing to it, in order to

pump air through the jar and into a bubble stone for putting in a glass of

water. It should generate mega tons of ozone.

V

Dick

I dont think that would work with the camera flash not enough voltage. An

easy way to do it would be go down to your local neon sign store and get an

old neon sign transformer, they put out 12 to 15,000 volts and can make a

real nice electric discharge, You could build the spark gap into a little

glass tube or jar and then run an aqaurium pump through it into a bubble

stone, should make lots of ozone.

V

Hey, Alvin, I just had another thought.

The home-made mag pulsers that some of us have made from old camera strobes

and party strobes, brings up another idea for building a spark induced ozone

generator.

Could the leads from the capacitor to the flash tube be used to power a

spark gap inside a glass jar half filled with water? For the mag pulser we

put the coil in series with the flash tube, but maybe for this application

we would want to either go in parallel with the tube, or eliminate it

altogether.

Any thoughts?

Dick

[Guest guest]

The most inefficient way to make a magnetic pulser would be to

use a xenon or strobe tube due to the fact that it is a gas lamp

and can not support the amount of instant current required in series through the

coil.

Best idea is to use a 25 amp SCR at 1000 volts to eliminate the strobe tube

and provide the power required to generate a powerful magnetic field.

Minimum of 350 volts is required for high output

The spark gap idea is not good as I explained in my previous email

Alvin http://www.rtvc-2000.com

Dick Rochon wrote:

> Hey, Alvin, I just had another thought.

>

> The home-made mag pulsers that some of us have made from old camera strobes

and party strobes, brings up another idea for building a spark induced ozone

generator.

>

> Could the leads from the capacitor to the flash tube be used to power a spark

gap inside a glass jar half filled with water? For the mag pulser we put the

coil in series with the flash tube, but maybe for this application we would want

to either go in parallel with the tube, or eliminate it altogether.

>

> Any thoughts?

>

> Dick

>

>

[Guest guest]

Dear Alvin... It appears that you are quite well versed in

building/understanding various units. What can you tell me about which Rife

and/or Rife/Beck unit is best for Lyme Disease, please. Thank you for your

time and consideration. Grammy Irene. idannolfo@...

[Guest guest]

Hi Alvin.

I went to your website to check out the plans for the EMEM3, but I am not sure I

found the correct one. Iooked over the one that was sent to you using the car

coil, an Radio Shack amp and a BK Generator, using a violet ray light. Is this

what you were referring to?

You said that you used a computer to generate the freq and a phanotron tube to

transmit the freq, so I'm thinking that this is not the setup you were referring

to. Are the plans or instructions showing the way you set yours up on the

website?

Thanks,

Dick

Re: Another thought

Hi idannolfo

A very effective unit that I have built and use with excellent

results is an EMEM3 which you can find information on at

http://www.royalrife.com this is built using a automotive coil

and a 2n6059 transistor..It drives a phanotron tube which acts

as a antenna to transfer the frequencys to the body..I drive mine with

a computer program and it generates each frequency automatically as required.

It is an amazing machine and can be built by anyone with some

knowledge in electronics.Also the four protocols of Bob Beck will cure

your Lyme disease if you follow the four protocols for the time it takes

to kill the virus..It is 90 hours or until you have completely recovered.

Alvin

idannolfo@... wrote:

> Dear Alvin... It appears that you are quite well versed in

> building/understanding various units. What can you tell me about which Rife

> and/or Rife/Beck unit is best for Lyme Disease, please. Thank you for your

> time and consideration. Grammy Irene. idannolfo@...

>

>

[Guest guest]

I have gotten two emails with the Klenz virus attached, with the sender name,

Duncan Crow and the subject, " upper corner " . It locks up the email program

unless you open the attachment, which allows the virus entry.

If you get it, hit Control, Alt, Del, to turn off your email program. It is

pretty smart, and looks for anti-virus programs and turns them off. Not fun. I

got rid of it by downloading the Trend, free virus program. Now I don't open any

email with an attachment.

Dick

Re: Another thought

Hi idannolfo

A very effective unit that I have built and use with excellent

results is an EMEM3 which you can find information on at

http://www.royalrife.com this is built using a automotive coil

and a 2n6059 transistor..It drives a phanotron tube which acts

as a antenna to transfer the frequencys to the body..I drive mine with

a computer program and it generates each frequency automatically as required.

It is an amazing machine and can be built by anyone with some

knowledge in electronics.Also the four protocols of Bob Beck will cure

your Lyme disease if you follow the four protocols for the time it takes

to kill the virus..It is 90 hours or until you have completely recovered.

Alvin

idannolfo@... wrote:

> Dear Alvin... It appears that you are quite well versed in

> building/understanding various units. What can you tell me about which Rife

> and/or Rife/Beck unit is best for Lyme Disease, please. Thank you for your

> time and consideration. Grammy Irene. idannolfo@...

>

>

[Guest guest]

Dick,

I have had many problems with these types of viruses... Sometimes as many as 6-8

in one day! Some even had themselves addressed as the list owner of one of

these lists! But, it is all automatically generated, by the virus through the

address book, so poor Duncan

must have gotten hit himself.

Fortunately, not only did I have the PCcillin, but my server has now gotten a

virus program that prescans everything before delivering the mail! What a

blessing.

Sorry for the problem.

Health, Hope, Joy & Healing :

May you Prosper, even as your Soul Prospers 3 2

Ruby

Email advice is not a substitute for medical treatment.

http://www.rubysemporium.com

SymphonicHealth

______________________________________________

«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤

¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯

[Guest guest]

What you need to do to keep out that virus is go to Windows update and

download all the lotest security updates. they will provent those automatic

viruses from doing anything. You can find " windows update " on the start

menu of your computer. Then it opens a website at microsoft and then click

on product updates. I get the klez worm virus a couple timos a day and it

does nothing to my computer, the seculrity updates rent the virues useless.

The problem with those particular viruses is the dont need to have an

attachment opened, they go off them inute you look at the email, unless you

have the security updates up to date.

V

I have gotten two emails with the Klenz virus attached, with the sender

name, Duncan Crow and the subject, " upper corner " . It locks up the email

program unless you open the attachment, which allows the virus entry.

If you get it, hit Control, Alt, Del, to turn off your email program. It is

pretty smart, and looks for anti-virus programs and turns them off. Not fun.

I got rid of it by downloading the Trend, free virus program. Now I don't

open any email with an attachment.

Dick

Re: Another thought

Hi idannolfo

A very effective unit that I have built and use with excellent

results is an EMEM3 which you can find information on at

http://www.royalrife.com this is built using a automotive coil

and a 2n6059 transistor..It drives a phanotron tube which acts

as a antenna to transfer the frequencys to the body..I drive mine with

a computer program and it generates each frequency automatically as

required.

It is an amazing machine and can be built by anyone with some

knowledge in electronics.Also the four protocols of Bob Beck will cure

your Lyme disease if you follow the four protocols for the time it takes

to kill the virus..It is 90 hours or until you have completely recovered.

Alvin

idannolfo@... wrote:

> Dear Alvin... It appears that you are quite well versed in

> building/understanding various units. What can you tell me about which

Rife

> and/or Rife/Beck unit is best for Lyme Disease, please. Thank you for

your

> time and consideration. Grammy Irene. idannolfo@...

>

>

[Guest guest]

> The problem with those particular viruses is the dont need to have an

> attachment opened, they go off them inute you look at the email, unless you

> have the security updates up to date.

If you disable OE preview, make OE use the restricted internet zone, and turn

off

all java, javascript and active scripting options for the restricted zone, then

you

substantially reduce the likelihood of getting infected by email with malicious

content.

Another precaution that further reduces your exposure is, for any incoming email

with a funny From or Title,right click once on the message and then click

properties.

Then click on " details " and then on " message source " . A small window will

appear in which the raw text of the email is displayed. Full Screen the window.

You can examine all aspects of the message without triggering any malicious

content.

[Guest guest]

Hi idannolfo

A very effective unit that I have built and use with excellent

results is an EMEM3 which you can find information on at

http://www.royalrife.com this is built using a automotive coil

and a 2n6059 transistor..It drives a phanotron tube which acts

as a antenna to transfer the frequencys to the body..I drive mine with

a computer program and it generates each frequency automatically as required.

It is an amazing machine and can be built by anyone with some

knowledge in electronics.Also the four protocols of Bob Beck will cure

your Lyme disease if you follow the four protocols for the time it takes

to kill the virus..It is 90 hours or until you have completely recovered.

Alvin

idannolfo@... wrote:

> Dear Alvin... It appears that you are quite well versed in

> building/understanding various units. What can you tell me about which Rife

> and/or Rife/Beck unit is best for Lyme Disease, please. Thank you for your

> time and consideration. Grammy Irene. idannolfo@...

>

>

[Guest guest]

Alvin,

Does it cost a lot to make one of these EMEM3 units?

Diane

Alvin Rose wrote:

>

> Hi idannolfo

> A very effective unit that I have built and use with excellent

> results is an EMEM3 which you can find information on at

> http://www.royalrife.com this is built using a automotive coil

> and a 2n6059 transistor..It drives a phanotron tube which acts

> as a antenna to transfer the frequencys to the body..I drive mine with

> a computer program and it generates each frequency automatically as

> required.

> It is an amazing machine and can be built by anyone with some

> knowledge in electronics.Also the four protocols of Bob Beck will cure

> your Lyme disease if you follow the four protocols for the time it

> takes

> to kill the virus..It is 90 hours or until you have completely

> recovered.

> Alvin

>

> idannolfo@... wrote:

>

> > Dear Alvin... It appears that you are quite well versed in

> > building/understanding various units. What can you tell me about

> which Rife

> > and/or Rife/Beck unit is best for Lyme Disease, please. Thank you

> for your

> > time and consideration. Grammy Irene. idannolfo@...

> >

> >

[Guest guest]

Dear Alvin... Am also very interested in your EMEM3 unit for Lyme, but as a

secretary with absolutely no mechanical/electrical/electronic background - it

is quite impossible for me to build one myself! Who on the web sells these

and approx. how much in $'s is this unit?

The used Rife-Bare unit is something I'm going to purchase shortly, but I

simply do not understand HOW a unit can be placed 6' from you and still

work? (My Zapper has two copper tubes which one holds in each hand -

body contact I can understand.)

Many thanks. Grammy Irene. Could you kindly respond to my e-mail address:

idannolfo@...

[Guest guest]

Hi Diane

Most of the cost is with the Phanotron tube

which acts as the frequency transfer antenna.

It costs about 189.US for the phanotron and several hundred dollars

for parts...you could also use the poor mans rife from holman.com

to do the same job and run it from your computer..

Works quite well.

Alvin

" d.linen " wrote:

> Alvin,

>

> Does it cost a lot to make one of these EMEM3 units?

>

> Diane

>

> Alvin Rose wrote:

> >

> > Hi idannolfo

> > A very effective unit that I have built and use with excellent

> > results is an EMEM3 which you can find information on at

> > http://www.royalrife.com this is built using a automotive coil

> > and a 2n6059 transistor..It drives a phanotron tube which acts

> > as a antenna to transfer the frequencys to the body..I drive mine with

> > a computer program and it generates each frequency automatically as

> > required.

> > It is an amazing machine and can be built by anyone with some

> > knowledge in electronics.Also the four protocols of Bob Beck will cure

> > your Lyme disease if you follow the four protocols for the time it

> > takes

> > to kill the virus..It is 90 hours or until you have completely

> > recovered.

> > Alvin

> >

> > idannolfo@... wrote:

> >

> > > Dear Alvin... It appears that you are quite well versed in

> > > building/understanding various units. What can you tell me about

> > which Rife

> > > and/or Rife/Beck unit is best for Lyme Disease, please. Thank you

> > for your

> > > time and consideration. Grammy Irene. idannolfo@...

> > >

> > >

[Guest guest]

Hi Idannolfo

The Rife Bare unit works quite well too but they

are usually very expensive..Uses a radio transmitter

and similar phanotron tube for transfer..The rife Bare unit

transmits the frequencys and they are absorbed by the body.

so no hand holds are necessary..The output signal is an RF

signal and you sit six feet or more from it and it will treat a number

of people at one time..It is effective and will get good results

against any disease by killing the virus or bacteria causing the

problem...The frequencys must be tuned very accurate to be

effective so a frequency counter is used to read the output.

I don't know where you can purchase an EMEM3 on the

net as they are usually built by the user from instructions at royalrife.com

Do a search for EMEM3 on google.com may get you results too

Regards Alvin

idannolfo@... wrote:

> Dear Alvin... Am also very interested in your EMEM3 unit for Lyme, but as a

> secretary with absolutely no mechanical/electrical/electronic background - it

> is quite impossible for me to build one myself! Who on the web sells these

> and approx. how much in $'s is this unit?

> The used Rife-Bare unit is something I'm going to purchase shortly, but I

> simply do not understand HOW a unit can be placed 6' from you and still

> work? (My Zapper has two copper tubes which one holds in each hand -

> body contact I can understand.)

> Many thanks. Grammy Irene. Could you kindly respond to my e-mail address:

> idannolfo@...

>

>

[Guest guest]

OK...remember the 'dough boy' who was wondering if his positive came

from having his hands in bread dough all day (since alcohol is produced

by the rising yeast and also the baking)...He was probably in the right

church but in the wrong pew....his positive was probably from SMELLING

the alcohol produced all day..NOT having his hands in it!!! Perhaps

Jill was exposed to cleaning agents at the rehab! This is getting all

TOO bizarre!

[Guest guest]

Too bad "dough boy" (I think his name was Chris) couldn't do some "self testing" to see if the dough really was the culprit. But, like most of us, he couldn't do it while under contract. And now in CA, it's written right into the contract that you WON'T do any self testing! Heaven forbid you figure out what is causing your positives and it wasn't booze. I'm sure the DCA/board lawyers had a hand in that....maybe since my case is now on the docket and that is my main defense.

Lorie

another thought

OK...remember the 'dough boy' who was wondering if his positive came from having his hands in bread dough all day (since alcohol is produced by the rising yeast and also the baking)...He was probably in the right church but in the wrong pew....his positive was probably from SMELLING the alcohol produced all day..NOT having his hands in it!!! Perhaps Jill was exposed to cleaning agents at the rehab! This is getting all TOO bizarre!

[Guest guest]

Tylenol on board on the first day? and following days? Any other

reason you think you may have been positive on the baseline? I have

not been positive since stopping the tylenol (knock on wood).

> >

> > Too bad " dough boy " (I think his name was Chris) couldn't do

> some " self testing " to see if the dough really was the culprit.

But,

> like most of us, he couldn't do it while under contract. And now

in

> CA, it's written right into the contract that you WON'T do any

self

> testing! Heaven forbid you figure out what is causing your

positives

> and it wasn't booze. I'm sure the DCA/board lawyers had a hand

in

> that....maybe since my case is now on the docket and that is my

main

> defense.

> > Lorie

> > another thought

> >

> >

> > OK...remember the 'dough boy' who was wondering if his

positive

> came

> > from having his hands in bread dough all day (since alcohol

is

> produced

> > by the rising yeast and also the baking)...He was probably

in

> the right

> > church but in the wrong pew....his positive was probably

from

> SMELLING

> > the alcohol produced all day..NOT having his hands in it!!!

> Perhaps

> > Jill was exposed to cleaning agents at the rehab! This is

> getting all

> > TOO bizarre!

> >

> >

> >

> >

> >

> >

> >

[Guest guest]

Wore gloves when cleaning the day before I was admitted. No Tylenol before admission but lots during my stay. Only source was spray-on hair product (which I refuse to give up) and perfume.

another thought> > > > > > OK...remember the 'dough boy' who was wondering if his positive > came > > from having his hands in bread dough all day (since alcohol is > produced > > by the rising yeast and also the baking)...He was probably in > the right > > church but in the wrong pew....his positive was probably from > SMELLING > > the alcohol produced all day..NOT having his hands in it!!! > Perhaps > > Jill was exposed to cleaning agents at the rehab! This is > getting all > > TOO bizarre!> > > > > > > > > > > > > >

[Guest guest]

I don't believe we had this information when Lorie was tested. So should I not clean and let cockroaches overrun my home and kill my child..I know ridiculous (we don't have cockroaches) but this is what it's coming to for a license?????? Re: another thought

you wore gloves....but how about a mask???? Is this what we have come to?? Remember, skin absorption is NOT the problem...it appears to be inhalation!!! Could it be cleaning products in addition to perfume and hairspray...it was a very low positive!!!

> > >

> > > Too bad "dough boy" (I think his name was Chris) couldn't do > > some "self testing" to see if the dough really was the culprit. > But, > > like most of us, he couldn't do it while under contract. And now > in > > CA, it's written right into the contract that you WON'T do any > self > > testing! Heaven forbid you figure out what is causing your > positives > > and it wasn't booze. I'm sure the DCA/board lawyers had a hand > in > > that....maybe since my case is now on the docket and that is my > main > > defense. > > > Lorie > > > another thought

> > > > > > > > > OK...remember the 'dough boy' who was wondering if his > positive > > came > > > from having his hands in bread dough all day (since alcohol > is > > produced > > > by the rising yeast and also the baking)...He was probably > in > > the right > > > church but in the wrong pew....his positive was probably > from > > SMELLING > > > the alcohol produced all day..NOT having his hands in it!!! > > Perhaps > > > Jill was exposed to cleaning agents at the rehab! This is > > getting all > > > TOO bizarre!

> > > > > > > > > > > > > > > > > > > > >