Guest guest Posted August 17, 2003 Report Share Posted August 17, 2003 My nearest computer shop advised me (with no knowledge of our special use of the QX) that such converters sometimes do and sometimes do not work! We need Bill's advice re the QX in particular!! Savage MA RSHom FSHom 26 Winstanley Road Saffron Walden Essex CB11 3EQ 01799 524442 Mobile: 07889 989398 Email: roger.jo@... laptop purchase for the SCIO Hope you all well. I have been researching this for quite sometime and with all the options starting to get more confused. I believe the laptop that you buy for the SCIO needs a serial and parallel port which alot of the new laptops dont have . Can anyone advise me the a USB port to a serial converter is sufficient ?? Appreciate any help with this ? Many thanks Sue ............................................. Quote Link to comment Share on other sites More sharing options...
Guest guest Posted August 17, 2003 Report Share Posted August 17, 2003 from experience a serial prot is best..however a USB with converter works but can be a pain to set up and if you are not conputer literate get someone else to set up the VCOMS allocation Kelsey Quoting suzijpearson <susan.j.pearson@...>: > Hope you all well. > I have been researching this for quite sometime and with all the > options > starting to get more confused. I believe the laptop that you buy for > the SCIO needs a serial and parallel port which alot of the new > laptops dont have . Can anyone advise me the a USB port to a > serial converter is sufficient ?? > > Appreciate any help with this ? > > Many thanks > Sue > > > > > ............................................ > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted August 18, 2003 Report Share Posted August 18, 2003 Hi , Recently,I have had to train a new client on QX that has bought one of the Toshiba 3500 that has not the Serial and parallele port. We tried after calling Levanta the interface that convert USB port to serail port.But The green light has never turn on. So,The search started on Internet and on phone to find the solution. We finally found the gadget that cost $150. dollars and get in as a slot inside the computer and create the serial parallele Port. Then it has worked. The green light turn on. But I would discourage any new buyer to buy some of these Computer it look like gadget added in the side of the computer. Jean- Lavoie Re: laptop purchase for the SCIO > from experience a serial prot is best..however a USB with converter works but > can be a pain to set up and if you are not conputer literate get someone else > to set up the VCOMS allocation > Kelsey > > Quoting suzijpearson <susan.j.pearson@...>: > > > Hope you all well. > > I have been researching this for quite sometime and with all the > > options > > starting to get more confused. I believe the laptop that you buy for > > the SCIO needs a serial and parallel port which alot of the new > > laptops dont have . Can anyone advise me the a USB port to a > > serial converter is sufficient ?? > > > > Appreciate any help with this ? > > > > Many thanks > > Sue > > > > > > > > > > ............................................ > > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted August 18, 2003 Report Share Posted August 18, 2003 Hi, I use a HP model ze5375us which has both serial and parallel ports. Have used it often with QX for 3 months now and I am very happy. Should also work good with SCIO and not too expensive-Mark laptop purchase for the SCIO Hope you all well.I have been researching this for quite sometime and with all the options starting to get more confused. I believe the laptop that you buy for the SCIO needs a serial and parallel port which alot of the new laptops dont have . Can anyone advise me the a USB port to a serial converter is sufficient ??Appreciate any help with this ?Many thanksSue............................................ Quote Link to comment Share on other sites More sharing options...
Guest guest Posted August 21, 2003 Report Share Posted August 21, 2003 Dear Ms. Pearson, The SCIO works through a USB port (In fact the cable we provide is a converter cable as most computers do not have either serial or parallel ports anymore). Everything is important about the computer but make sure that the pixel resolution of the screen gives you the minimun 1280x1024 the SCIO requires as it is a true 'Windows' application that allows you to have many windows active at the same time. Please see attached document for further information. Kind regards, Francisco ezsuzijpearson <susan.j.pearson@...> wrote: Hope you all well.I have been researching this for quite sometime and with all the options starting to get more confused. I believe the laptop that you buy for the SCIO needs a serial and parallel port which alot of the new laptops dont have . Can anyone advise me the a USB port to a serial converter is sufficient ??Appreciate any help with this ?Many thanksSue............................................ Quote Link to comment Share on other sites More sharing options...
Guest guest Posted August 21, 2003 Report Share Posted August 21, 2003 Dear Mr. Savage, Most converters work. However, I have found difficulties with a 'Gericom' computer and a different make of cable had to be installed. I have probably already set up a good 30 computers for the SCIO and have encountered problem only on this one. I am not implying that such model is no good, I am saying that it might happen that a particular make of cable might not match a particular make of computer. Once the cable is properly installed and the USB port set as per our instructions, the SCIO should work okay. Kind regards, Francisco ez Savage <roger.jo@...> wrote: My nearest computer shop advised me (with no knowledge of our special use ofthe QX) that such converters sometimes do and sometimes do not work! Weneed Bill's advice re the QX in particular!! Savage MA RSHom FSHom26 Winstanley RoadSaffron WaldenEssex CB11 3EQ01799 524442 Mobile: 07889 989398Email: roger.jo@...-----Original Message-----From: suzijpearson [mailto:susan.j.pearson@...]Sent: 14 August 2003 16:43qxci-english Subject: laptop purchase for the SCIOHope you all well.I have been researching this for quite sometime and with all theoptionsstarting to get more confused. I believe the laptop that you buy forthe SCIO needs a serial and parallel port which alot of the newlaptops dont have . Can anyone advise me the a USB port to aserial converter is sufficient ??Appreciate any help with this ?Many thanksSue............................................ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.