INSTRUCTIONS FOR THE WATER COIL

[Guest guest]

INSTRUCTIONS

FOR USE OF THE WATER COIL.

COPYRIGHT AGB NZ LTD 2005

Energise the Water when a patient is not attached to

the Head harness, as you need to set the power on MAXIMUM.

 Plug the lead

of the water coil into the red socket on the back of the QXCI/SCIO.

Set the power on maximum, Activate the point probe in

the ‘treatments” drop down panel on the matrix page, and then click

“energise water from the point probe”.Zap

three times

 

To use the water coil to its maximum potential you

must use it and drink the water everyday. First thing in the morning you should

make a container of water to last the household all day and do the same for

your clinic.

You should give each patient a glass of this water to

drink prior to therapy and after testing. When

you do this you detox the patient by seven points and raise the energy levels

by ten points. You are now already half way there to making the patient feel

better.

You should also load into the water after first

energising it, restore Chi and balance life force from the additional therapy

drop down panel in ‘Times therapy and super learning”. You can if

you wish go on to load any other frequency you wish to make your water more

effective.

The

water coil is silver plated you will need at times to polish the silver as it

will tarnish use Silvo and wash after polishing.

DESIGNED AND MANUFACTURED BY AGB NZ LTD THE DESIGNERS OF THE

ORIGINAL QXCI/SCIO ATTACHMENTS.

AGB NZ LTD.

P.O. BOX

40220

GLENFIELD.

AUCKLAND

NEW

ZEALAND. EMAIL algail@...