Guest guest Posted October 17, 2006 Report Share Posted October 17, 2006 Look at my page of construction plans. The blood electrifier plans include a drawing showing how the parts connect instead of just a schematic. :-) Forrest Electrotherapy Experimenters Club: http://www.geocities.com/a57ngel/club/ Construction Plans for making electromedicine devices: http://www.geocities.com/a57ngel/book/plans/ Political animated comics: http://www.markfiore.com/animation/stay.html __________________________________________________ Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 19, 2006 Report Share Posted October 19, 2006 See: http://www.sharinghealth.com/beckprotocol/buildyourown.html > > Does anyone have step-by-step instructions for building a Beck zapper? > I want to get started on the protocol, but don't have a lot of money. > I've already built a CS maker, and will be shortly building a magnetic > pulser, but I don't have any instructions on how to build a zapper. > I'm no dummy, but I can't read a schematic. I can build a > zapper, but Dr. Beck said that they weren't any good. There are plenty > of instructions for building zappers, even a step-by-step movie > you can watch online. But nothing but a schematic for the Beck zapper. > HELP!!! Even a labeled picture of the guts of a finished (homemade) > device would be helpful. Thank you all very much! > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 19, 2006 Report Share Posted October 19, 2006 Russ That looks like the plans for a collodial silver generator. How about the plans for his Zapper too? >From: " sotainstruments " <russ@...> >Reply- > >Subject: Re: Beck Zapper >Date: Thu, 19 Oct 2006 13:36:16 -0000 > >See: > >http://www.sharinghealth.com/beckprotocol/buildyourown.html > > > > > > > > Does anyone have step-by-step instructions for building a Beck >zapper? > > I want to get started on the protocol, but don't have a lot of money. > > I've already built a CS maker, and will be shortly building a >magnetic > > pulser, but I don't have any instructions on how to build a zapper. > > I'm no dummy, but I can't read a schematic. I can build a > > zapper, but Dr. Beck said that they weren't any good. There are >plenty > > of instructions for building zappers, even a step-by-step movie > > you can watch online. But nothing but a schematic for the Beck >zapper. > > HELP!!! Even a labeled picture of the guts of a finished (homemade) > > device would be helpful. Thank you all very much! > > > > > _________________________________________________________________ Ready for the world's first international mobile film festival celebrating the creative potential of today's youth? Check out Mobile Jam Fest for your a chance to WIN $10,000! www.mobilejamfest.com Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 19, 2006 Report Share Posted October 19, 2006 Look closely and you'll see that there are two output jacks. One for the bioelectrifier and one for the colloidal silver generator On 10/19/06, frank kish <zeebolt7x@...> wrote: > > Russ That looks like the plans for a collodial silver generator. > > How about the plans for his Zapper too? > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 20, 2006 Report Share Posted October 20, 2006 BG is better than beck? I am new here. Can you explain the difference and what you've seen it do and heal? Thanks! Re: Beck Zapper > > Ok, what's a bG's? It ain't a 'thing' - it's your egroup honcho. Where are the plans? In the files. Why is this better than Dr. > Becks'? Is 4 times more effective, gen'ly doesn't sting & costs lessssss. Joe. > > > > > Why waste your time on a less effective solution? Anything > > Beck's could do - bG's can do more effectively & safer; > > IT'S A DIRECT SUBSTITUTE in the Beck protocol. > > > > Joe. > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 31, 2006 Report Share Posted October 31, 2006 I made a circuit board layout for the Blood Electrifier / Colloidal Silver Generator and put it in a spreadsheet with all the other info you'll need (collected from the sharinghealth.com web site). You can find it in the files section at /files/ Look for blood-electrifier-plans.xls -Tom > > > > Does anyone have step-by-step instructions for building a Beck > zapper? > > I want to get started on the protocol, but don't have a lot of money. > > I've already built a CS maker, and will be shortly building a > magnetic > > pulser, but I don't have any instructions on how to build a zapper. > > I'm no dummy, but I can't read a schematic. I can build a > > zapper, but Dr. Beck said that they weren't any good. There are > plenty > > of instructions for building zappers, even a step-by-step movie > > you can watch online. But nothing but a schematic for the Beck > zapper. > > HELP!!! Even a labeled picture of the guts of a finished (homemade) > > device would be helpful. Thank you all very much! > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 31, 2006 Report Share Posted October 31, 2006 Oh, thank you. I did not even see the files section :-/ I've been to other so many times my brain only reads the "post" and "message" parts. Or so I would like to think.Give me your experience with this device, if you want. So far I have read about 20 or so posts with no one sayng anything about whether this device does anything or not. I guess there are the testimonials under the files section though.-Tom <heytomevans@...> wrote: I made a circuit board layout for the Blood Electrifier / Colloidal Silver Generator and put it in a spreadsheet with all the other info you'll need (collected from the sharinghealth.com web site). You can find it in the files section at /files/ Look for blood-electrifier-plans.xls -Tom > > > > Does anyone have step-by-step instructions for building a Beck > zapper? > > I want to get started on the protocol, but don't have a lot of money. > > I've already built a CS maker, and will be shortly building a > magnetic > > pulser, but I don't have any instructions on how to build a zapper. > > I'm no dummy, but I can't read a schematic. I can build a > > zapper, but Dr. Beck said that they weren't any good. There are > plenty > > of instructions for building zappers, even a step-by-step movie > > you can watch online. But nothing but a schematic for the Beck > zapper. > > HELP!!! Even a labeled picture of the guts of a finished (homemade) > > device would be helpful. Thank you all very much! > > > We have the perfect Group for you. Check out the handy changes to . Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 31, 2006 Report Share Posted October 31, 2006 Hi,I'm kind of not that great at reading schematics. I don't understand which side of the diode, LED, or capacitor is neg (or pos) or why the chip has "-" and "+" symbols on it. Also the phone jack on the right has 3 pins connected, but the device only has 2 electrodes that attach to the skin no? The switch schematic confuses me a little too, but it might become more clear when I see/test the switch.I think I can work through this. At worst I will research more about schematics on the interent.-Tom <heytomevans@...> wrote: I made a circuit board layout for the Blood Electrifier / Colloidal Silver Generator and put it in a spreadsheet with all the other info you'll need (collected from the sharinghealth.com web site). You can find it in the files section at /files/ Look for blood-electrifier-plans.xls -Tom > > > > Does anyone have step-by-step instructions for building a Beck > zapper? > > I want to get started on the protocol, but don't have a lot of money. > > I've already built a CS maker, and will be shortly building a > magnetic > > pulser, but I don't have any instructions on how to build a zapper. > > I'm no dummy, but I can't read a schematic. I can build a > > zapper, but Dr. Beck said that they weren't any good. There are > plenty > > of instructions for building zappers, even a step-by-step movie > > you can watch online. But nothing but a schematic for the Beck > zapper. > > HELP!!! Even a labeled picture of the guts of a finished (homemade) > > device would be helpful. Thank you all very much! > > > Want to start your own business? Learn how on Small Business. Quote Link to comment Share on other sites More sharing options...
Guest guest Posted October 31, 2006 Report Share Posted October 31, 2006 ,The op-amp " - " and " + " is nothing to worry about, just connect to the right pin numbers. They designate the inverting and non-inverting inputs of the op amp and whether an input signal will appear at the output with the same polarity or opposite polarity. An electrolytic capacitor (C2) will usually have markings which point to the negative terminal. Smaller-value capacitors (like C1) is usually non-polarized.Most diodes are marked with a band or dot which signifies the cathode end. On the schematic a diode looks like this: (anode) -->|-- (cathode)In this circuit, since the Zener diodes (D1 & D2) are wired back-to-back, you can't really go wrong. Just make sure they're back-to-back. Likewise, the dual-color (CR1) LED will work OK if it's reversed.The reason for the 3rd connection on the phone jack (J1) is to test the unit before plugging in the electrodes. With the electrodes removed, the signal goes through the LED and Zener diodes. If the batteries are strong, the LED will flash.-TomOn 10/31/06, george george <lucko_luaga@... > wrote: Hi,I'm kind of not that great at reading schematics. I don't understand which side of the diode, LED, or capacitor is neg (or pos) or why the chip has " - " and " + " symbols on it. Also the phone jack on the right has 3 pins connected, but the device only has 2 electrodes that attach to the skin no? The switch schematic confuses me a little too, but it might become more clear when I see/test the switch. I think I can work through this. At worst I will research more about schematics on the interent.-Tom <heytomevans@ gmail.com> wrote: I made a circuit board layout for the Blood Electrifier / Colloidal Silver Generator and put it in a spreadsheet with all the other info you'll need (collected from the sharinghealth.com web site). You can find it in the files section at /files/ Look for blood-electrifier-plans.xls -Tom > > See: > > http://www.sharinghealth.com/beckprotocol/buildyourown.html > > > . Quote Link to comment Share on other sites More sharing options...
Guest guest Posted November 1, 2006 Report Share Posted November 1, 2006 ,I haven't built a unit yet so I can't comment. You'll probably have to search the messages for testimonials as you're unlikely to find them posted on a website. The FDA takes a dim view of anyone who sells these devices making claims that it " cures " cancer or AIDS or kills parasites, bacteria, etc. The reason is that no one has funded an independent study to get FDA approval and many skeptics claim that there are forces working to prevent such approval. I found a note in the files section at:Beck-n-stuff/files/%20Forrest%20Links.rtf (If you follow the four links at the bottom, you'll be able to read some testimonials. The word " incarcerated " is pretty scary. I'll have to read up on 's story.)Here's the file's contents: You can find Forrest's websites on the " Wayback Machine " Site: <http://www.archive.org/web/web.php> Here are the original names of the 4 sites that I know of: 1) www.ioa.com/~dragonfly 2) www.bioelectric.ws 3) www.excel.net/~jaguar 4) www.geocities.com/a57ngel Here are links to where they were stored: 1) < http://web.archive.org/web/*/http://www.ioa.com/~dragonfly/> 2) <http://web.archive.org/web/*/http://www.bioelectric.ws/> 3) < http://web.archive.org/web/*/http://www.excel.net/~jaguar/> 4) < http://web.archive.org/web/*/http://www.geocities.com/a57ngel/> is currently incarcerated for having testimonies on his sites. You can contact magpulser@... for similar units. Posted by list moderator Donna CrowTo your health!TomOn 10/31/06, george george <lucko_luaga@...> wrote: Oh, thank you. I did not even see the files section :-/ I've been to other so many times my brain only reads the " post " and " message " parts. Or so I would like to think. Give me your experience with this device, if you want. So far I have read about 20 or so posts with no one sayng anything about whether this device does anything or not. I guess there are the testimonials under the files section though. -Tom <heytomevansgmail> wrote: I made a circuit board layout for the Blood Electrifier / Colloidal Silver Generator and put it in a spreadsheet with all the other info you'll need (collected from the sharinghealth.com web site). You can find it in the files section at /files/ Look for blood-electrifier-plans.xls -Tom > > > > Does anyone have step-by-step instructions for building a Beck > zapper? > > I want to get started on the protocol, but don't have a lot of money. > > I've already built a CS maker, and will be shortly building a > magnetic > > pulser, but I don't have any instructions on how to build a zapper. > > I'm no dummy, but I can't read a schematic. I can build a > > zapper, but Dr. Beck said that they weren't any good. There are > plenty > > of instructions for building zappers, even a step-by-step movie > > you can watch online. But nothing but a schematic for the Beck > zapper. > > HELP!!! Even a labeled picture of the guts of a finished (homemade) > > device would be helpful. Thank you all very much! > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted November 1, 2006 Report Share Posted November 1, 2006 Does anyone have the same for building a magnetic pulser to beck specifications ? Like a spreadsheet file like the one for the blood pulser by Tom ? > > Does anyone have step-by-step instructions for building a Beck zapper? > I want to get started on the protocol, but don't have a lot of money. > I've already built a CS maker, and will be shortly building a magnetic > pulser, but I don't have any instructions on how to build a zapper. > I'm no dummy, but I can't read a schematic. I can build a > zapper, but Dr. Beck said that they weren't any good. There are plenty > of instructions for building zappers, even a step-by-step movie > you can watch online. But nothing but a schematic for the Beck zapper. > HELP!!! Even a labeled picture of the guts of a finished (homemade) > device would be helpful. Thank you all very much! > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted November 4, 2006 Report Share Posted November 4, 2006 , I've spent a lot of time recently reading the testimonials in the files section of this group. I also found a large number of testimonials in the files section of the Beck-n-stuff group. Thanks to all who posted their successes. It makes great reading. -Tom On 11/1/06, Tom <tom@...> wrote: ,I haven't built a unit yet so I can't comment. You'll probably have to search the messages for testimonials as you're unlikely to find them posted on a website. The FDA takes a dim view of anyone who sells these devices making claims that it " cures " cancer or AIDS or kills parasites, bacteria, etc. The reason is that no one has funded an independent study to get FDA approval and many skeptics claim that there are forces working to prevent such approval. I found a note in the files section at:Beck-n-stuff/files/%20Forrest%20Links.rtf (If you follow the four links at the bottom, you'll be able to read some testimonials. The word " incarcerated " is pretty scary. I'll have to read up on 's story.)Here's the file's contents: You can find Forrest's websites on the " Wayback Machine " Site: < http://www.archive.org/web/web.php> Here are the original names of the 4 sites that I know of: 1) www.ioa.com/~dragonfly 2) www.bioelectric.ws 3) www.excel.net/~jaguar 4) www.geocities.com/a57ngel Here are links to where they were stored: 1) < http://web.archive.org/web/*/http://www.ioa.com/~dragonfly/ > 2) <http://web.archive.org/web/*/http://www.bioelectric.ws/> 3) < http://web.archive.org/web/*/http://www.excel.net/~jaguar/> 4) < http://web.archive.org/web/*/http://www.geocities.com/a57ngel/ > is currently incarcerated for having testimonies on his sites. You can contact magpulser@... for similar units. Posted by list moderator Donna CrowTo your health!Tom On 10/31/06, george george < lucko_luaga@...> wrote: Oh, thank you. I did not even see the files section :-/ I've been to other so many times my brain only reads the " post " and " message " parts. Or so I would like to think. Give me your experience with this device, if you want. So far I have read about 20 or so posts with no one sayng anything about whether this device does anything or not. I guess there are the testimonials under the files section though. -Tom <heytomevansgmail> wrote: I made a circuit board layout for the Blood Electrifier / ColloidalSilver Generator and put it in a spreadsheet with all the other infoyou'll need (collected from the sharinghealth.com web site). You can find it in the files section at /files/ Look for blood-electrifier-plans.xls-Tom> >> > Does anyone have step-by-step instructions for building a Beck > zapper?> > I want to get started on the protocol, but don't have a lot of money. > > I've already built a CS maker, and will be shortly building a > magnetic> > pulser, but I don't have any instructions on how to build a zapper. > > I'm no dummy, but I can't read a schematic. I can build a > > zapper, but Dr. Beck said that they weren't any good. There are > plenty> > of instructions for building zappers, even a step-by-step movie > > you can watch online. But nothing but a schematic for the Beck > zapper.> > HELP!!! Even a labeled picture of the guts of a finished (homemade)> > device would be helpful. Thank you all very much!> >> Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.