Guest guest Posted October 26, 2000 Report Share Posted October 26, 2000 Duncan, Those links are no good unless one is a member of the list. But, I am familiar with Beck's earlier zappers. These can't be too much different. Beck's protocol might be worth it for a serious illness like AIDS or hep C. It seemed too time consuming to me 2 hours a day. MAybe they have achieved the same results in less time by now. For my purposes, 's zapper served well, in less time. Neither of their methods will penetrate certain cavities, such as the GI tract or eyeballs, cholesteral stones. For them, you need a pulser, which I also made. I just made a new one from a radio shack strobe last week. I discovered I can accomplish everything I want to with just the pulser & no zapper. And, the pulser doesn't create electroporosis. All zappers are adaptations of Rife's work on the frequency harmonics of pathogens. That was an even more time consuming protocol. describes the transition from basic Rife principles to her zapper. Pulsers accomplish the same thing with EMP. I don't believe any of them kill the pathogens. I believe they stun them for longer than their brief life cycle and they fail to reproduce. That seems to be a function of frequency or EMP applied to the body. And, they all miss the point, which is, IMO, the cause of the disease, not the symptom. In plants, pathogens are symptoms of a diseased plant. I don't believe it is any different with humans. It begins with oxygen. If we don't allow ourselves to become hypoxic we won't need zappers. Zappers are relatively low-cost for someone who has to get rid of a dread disease that the zappers work with & have no money. It still makes more sense to me to spend my time and money eliminating the cause of my problems. jim Duncan Crow wrote: > > Hey folks, ya gotta see this!! > > Check out the great 4-part background article on frequency starting on the > message//519 > They're teaching > healing by freq in Ohio!! > > Point is - I can see congruence in our methods, faith, and physics just like > Dr. Becker predicted would happen... > > Jim, this oughta interest you greatly.. > > ciao > ----- carpe diem, carpe pucunia, carpe femina. -- Jim Lambert jlambert@... http://www.entrance.to/madscience http://www.entrance.to/poetry Quote Link to comment Share on other sites More sharing options...
Guest guest Posted November 5, 2001 Report Share Posted November 5, 2001 Hi Dick, Since I never used the frequencies from my hard drive I can't answer your other questions. If you want to test your zapper here is a post from another list. I don't know if this works. Dotsie ~~~~~~~~~~ Maybe I can help. Maybe *** needs proof that his zapper works. Or maybe you need proof that your zapper works. An inexpensive and often over- looked test tool is one's own AM/FM radio. Mine is a brand new GE desktop clock/alarm/radio model 7-4852A. According to my own informal tests it detects the presence of electronic signals from approximately 20 Hz to 105 kHz. That is 20 to 105,000 Hz. Most zappers are designed to generate signals in this very same frequency range. In other words, if your Zapper works, you should hear it on your radio. The test procedure is simple and easy and it consists of the following twelve steps: 1) Turn on your radio. 2) Set the AM/FM switch to AM. (The range of AM frequency is approximately 530 to 1700 kHz). 3) Make sure that your radio works. 4) Set the dial to approximately 1,000 kHz. Select a frequency that is inactive and in between two active broadcast frequencies. Ideally at your chosen frequency there should be silence. 5) Move your Zapper next to your radio. 6) Turn on the Zapper. 7) Ideally, on your radio you should start hearing an an unfamiliar and annoying noise. 8) The noise should get stronger as you move your Zapper closer to your radio. 9) The noise should get weaker as you move your Zapper away from your radio. 10) The noise should stop as soon as you turn off your Zapper. 11) If your radio works but you can hear no Zapper noise on your radio, your Zapper may not be working. 12) Check the battery, go back to step 4, or do some additional testing. Quote Link to comment Share on other sites More sharing options...
Guest guest Posted November 5, 2001 Report Share Posted November 5, 2001 Hi Sound all very interesting, but for your interest, I like to mentioned that your downloaded Rife frequencies are square waves, it is very doubtful that you get out of your Stereo these amplified square waves, the prove would be to check with a oscilloscope the output wave. If it kill's Bugs by electrocution ? Cheers Klaus Frequency I downloaded various Rife frequencies onto my hard drive and then copied them to a CD and to a cassette tape. Then I attached wires to the antenna outlets of a stero player and attached TENS pads to the wires. When I play the CD or cassette tape on the stero with the pads attached to my wrists I must turn the volume way down or it feels like I am getting electrocuted. I am wondering if this could be harmful if a person did not get the volume turned down fast enough. (I have found its much better to start with the volume way down and advance it until it almost becomes painful). Also, just how much sensation is required for the frequencies to do their job? Or do you have to feel it at all? I couldn't feel the frequency from a e Zapper, but one I bought similar to Beck's did produce a real feeling, but bearable. And would blasting the sound in a closed room be beneficial to a person in the room (with ear plugs)? And finally, have experiments been done using sound frequencies to kill bacteria or flukes? Curious, Dick P.S. I buy my vitamins and supplements at 60% to 80% off list price. You can too. Click link below: http://www.1shoppingcart.com/app/aftrack.asp?afid=17763 To view the " America is Beautiful " Photocontest Winners: www.go.to/photocontest.com Quote Link to comment Share on other sites More sharing options...
Guest guest Posted March 14, 2008 Report Share Posted March 14, 2008 Why? What is her practical application for that? Is she a practitioner? Researcher, scientist, another hidden camera “60 minutes expose’” style newspiece. The trivector patterns and frequencies are vast packages of indeed accessible data but this is a waste of time and often derails the client into irrelevant territory; only further confusing them or making them more neurotic sometimes. You can load remedy picture and then you have a whole page of individual trivector graphics but again be wary of your time, energy, and intent, (and your safety in a field challenged by our current climate of hostilities of vested interests and upset market shares) when going the distance for clients unless you have a highly established trust over some duration of time and a general sense of their motives. Hope this comes across in a positive way as intended, I only want us to all take due caution. Sincerely and Aloha, Holt, Quantum Biofeedback Center, Kauai, Hawaii 808 634 7232 On 3/13/08 6:48 AM, " Lynette " <lynettek62@...> wrote: 808 Hello, I have a client who wants to know the frequency of her organs, is that something we can do? thanks. Quote Link to comment Share on other sites More sharing options...
Guest guest Posted March 14, 2008 Report Share Posted March 14, 2008 No we cannot tell the client the frequency of their organ. We have a preprogramed frequency within the device which allows us to look for a comparison in frequencies. Another words; looking to see what the pre-programed frequency which was determined to be healthy and how it may compare to the frequency or stressors of the body. When all these are tested they are placed in a numerical order which gives us an indicator of which may be most out of balance. This does not mean that it is sick or that is healthy tissue. We cannot tell that since it is not within the legal description or parameter of the device. Remember we only look at stress. And we attempt to help the client help their own body to rebalance. Which is only one phase of the work they may be doing or may needing. Lifestyle changes being the biggest factor that the client may need to be aware of so they can attempt to rebalance. Yours in Health, Kathy Frequency Hello,I have a client who wants to know the frequency of her organs, is that something we can do? thanks. Quote Link to comment Share on other sites More sharing options...
Guest guest Posted March 21, 2008 Report Share Posted March 21, 2008 Dear Kathy. How those pre-programed frequencies were measured? How can u know the frequency of an organ/mineral/whatever ? Thank a lot Vered Quote Link to comment Share on other sites More sharing options...
Guest guest Posted March 27, 2008 Report Share Posted March 27, 2008 It is an interesting thing to go to Budapest and experience what Bill does first hand. I wish he would make a copy of some of it to make it available to the technicians out there. Problem of course would be confidentiality and control on infringements; my guess only. Many of us take things to Bill to have put into the device. I for one have gotten company approval from the Wainora NCD (Natural Cellular Defense), the Or-ion Zeolite and the Young Living Essential Oils all of which have now been put into the programming. But, emotions and tissue is similar from what we've been told and explained by Bill. So I'll attempt to second-hand explain part of it. Emotions were studied by taking several people (I don't recall how many) and putting them into situations which lead to certain emotions, these were recorded to determine the 'norm' of a specific frequency and that is what was put into the programing. An organ, a tooth, or any "physical" item well teeth I know for sure because I'm working with someone right now to get children's teeth into the program, these samples are looked at by 'experts' who determine healthy tissue and then it is placed into the program. I can only assume tissue samples were done the same way; to be sure when you go to the next conference or congress ask Bill that question. When I go, which I will be teaching at the Mexico City Conference May 14-2 , I ask people if there are questions they need answered that they would like passed on to Bill, or messages or samples (with company approval) that we can take to Bill for him to put into the device...this does not mean he will do it, because he will test them first to see if they are something he likes; if they don't measure up, they don't go in. And for clarification since many technicians mistake the Mexico Conference as the Quantum Alliance Congress, it is not the same thing, I will be in Mexico City speaking with Bill and IMUNE, but not at the Q-A Congress as I am not a contracted part of their organization and have not been asked or requested to present there. But, no matter which type of event you might decide to go to, bring your list of questions and ask your instructors first, that is what they are there for, then if they don't know the answer (believe it or not, we don't always have all the answers and we ourselves keep learning) or you feel you need more information take those questions to Bill. Yours in Health, Kathy www.4yourhealthshop.com Kathy , ND Re: Frequency Dear Kathy.How those pre-programed frequencies were measured?How can u know the frequency of an organ/mineral/ whatever ?Thank a lotVered Quote Link to comment Share on other sites More sharing options...
Guest guest Posted March 28, 2008 Report Share Posted March 28, 2008 Hi. I'm asking again... How those pre-programed frequencies were measured? How can u know the frequency of an organ/mineral/emotions? 10x Vered Quote Link to comment Share on other sites More sharing options...
Guest guest Posted April 4, 2008 Report Share Posted April 4, 2008 Dear Vered There is a device designed by Dr. called the QQC (Quantum Quality Control). This device measures Volts Amperage and Resistance from an organ tissue, flower, poison or any substance. go to http://www.qxsubspace.com and look at the information documents on how the SCIO works. Also if you go to http://www.imune.net there you will find the research Journals from the work of Dr. . Best Regards From: vered.shay Sent: Friday, March 28, 2008 10:23 AM qxci-english Subject: Re: Frequency Hi.I'm asking again...How those pre-programed frequencies were measured?How can u know the frequency of an organ/mineral/emotions?10xVered Quote Link to comment Share on other sites More sharing options...
Guest guest Posted April 4, 2008 Report Share Posted April 4, 2008 from what i have read, Dr. Royal RIfe used his energy machine and discovered the electrial frequencies of organ and tumors. Each was unique in itself. i will look up the article and send it to how ever is interested. this was the only place that i have seen anything explaining anything. i get frustrated when i ask questions and the reply is you dont need to know just learn the machine. i like to how to explain what i am doing and how to read the results. how do i know if the client is getting better or worse? Margaret ---- " vered.shay " <vergil@...> wrote: > Hi. > > I'm asking again... > > How those pre-programed frequencies were measured? > How can u know the frequency of an organ/mineral/emotions? > > 10x > Vered > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted April 10, 2008 Report Share Posted April 10, 2008 Regarding the Rife Technology, the pre-programmed frequencies may be out of date as soon as they are programmed. Pathogens have a tendency to mutate and will change to protect themselves. It is better to have a sweeping current that delivers the frequency that the human body operates on when it is in perfect health. My understanding of that correct frequency is 13.8 volts. Maybe that will help. I have some experience with this because some very dear friends of mine worked with a protégé of Dr. Rife’s on this very subject. I helped write the owners manual of the machines we use which are all built by hand.  We have been working on this for over 12 years, with several successful prototypes, each one evolving into better, more effective, and smaller units. We have been getting amazing results using the technology that he taught us. His name was Dr. Rapsomanicus (sp?) He became very good friends with one of my friends who happened to be one of his patients at the time. His units were not portable. She wanted a portable unit that could be taken home with her. He died about 6 years ago in his 80’s after living several years in hiding under the protection of Scotland Yard in England after several attempts on his life which started shortly after a raid on his pain clinic in Las Vegas by the FDA. is credited with having a hand in developing sonar. He was a real icon in England, which is why Scotland Yard came and got him to put him into protective custody after hearing of the attempts on his life. Jan From: qxci-english [mailto:qxci-english ] On Behalf Of mpicone@... Sent: Friday, April 04, 2008 5:43 PM qxci-english Cc: vered.shay Subject: Re: Re: Frequency from what i have read, Dr. Royal RIfe used his energy machine and discovered the electrial frequencies of organ and tumors. Each was unique in itself. i will look up the article and send it to how ever is interested. this was the only place that i have seen anything explaining anything. i get frustrated when i ask questions and the reply is you dont need to know just learn the machine. i like to how to explain what i am doing and how to read the results. how do i know if the client is getting better or worse? Margaret ---- " vered.shay " <vergilbezeqint (DOT) net> wrote: > Hi. > > I'm asking again... > > How those pre-programed frequencies were measured? > How can u know the frequency of an organ/mineral/emotions? > > 10x > Vered > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted April 10, 2008 Report Share Posted April 10, 2008 I do not mean to take this question lightly, but I would like to make a couple observations since I had written before on this topic. We have to remember this is also a frequency that was determined by Dr. Rife. As I said before, we don't know exactly who's frequency it is or how many he studied before he determined a healthy organ or tissue. Or for a dis-eased tissue. Some things we have to accept on faith; unless you want to go into the research end of the field and start testing for these yourself. I for one know why they work, but I cannot give you the answer of who's was put in. I do know the frequencies for emotions were taken by using several participants to get an average frequency. I'd love to offer more, but I'm not a scientist. Maybe we have a couple scientists on the chat group???? If so can you offer some conclusive information and address this topic? Yours in Health, Kathy www.4yourhealthshop.com Re: Re: Frequency from what i have read, Dr. Royal RIfe used his energy machine and discovered the electrial frequencies of organ and tumors. Each was unique in itself. i will look up the article and send it to how ever is interested. this was the only place that i have seen anything explaining anything. i get frustrated when i ask questions and the reply is you dont need to know just learn the machine. i like to how to explain what i am doing and how to read the results. how do i know if the client is getting better or worse? Margaret---- "vered.shay" <vergilbezeqint (DOT) net> wrote: > Hi.> > I'm asking again...> > How those pre-programed frequencies were measured?> How can u know the frequency of an organ/mineral/ emotions?> > 10x> Vered> > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted April 13, 2008 Report Share Posted April 13, 2008 Dear . Thank u so much 4 your answer. I'll do the reading... 10x Vered Quote Link to comment Share on other sites More sharing options...
Guest guest Posted April 13, 2008 Report Share Posted April 13, 2008 Dear Kathy. Thank u for your answer. Vered Quote Link to comment Share on other sites More sharing options...
Guest guest Posted April 16, 2008 Report Share Posted April 16, 2008 Did you mean 13.8 Hz or MhzFrequencies do not get measured in volts that is for current!Best Regards BrancoQuantuMedical Ltd.IQCTIntegrated Quantum Treatment Centre Branco LCPH MARH FBIH London Tel.: +49 30 3010 1163 Mobile: +49 176 2079 6804http://www.quantumedical.de Blogs:http://spaces.msn.com/brancofernando http://www.xing.com/go/invite/8469692.3d69b2 The SCIO: http://www.quantumedical.dehttp://www.qxsubspace.comhttp://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfPMN/pmn.cfm?ID=71312Above link to the Registration of the EPFX/SCIO with the FDA. Very Serious Health Related Quote Link to comment Share on other sites More sharing options...
Guest guest Posted April 17, 2008 Report Share Posted April 17, 2008 From Hulda : pathogen frequencies are called bandwidth. As they age the bandwidth reduces, when they die a single frequency can be left. The moulds and associated toxins bandwidth is approximately 80 - 300, bacteria and viruses 300 - 450, worms 300 - 470, warts 340 - 450, tapeworms 430 -500, mites 650 - 900, so 50 - 850 would kill all theoretically. The live item is far more potent than the dead one. With the flu virus and other viruses they do mutate on a yearly basis. "The Cure For All Diseases", everyone should have this book, ISBN 1-890035-01-7 page 561 and after. In the words of Ginger B "She is a saint", but she is actually a bio-chemist. It will change the way you live. Bye Sue Quote Link to comment Share on other sites More sharing options...
Guest guest Posted August 5, 2009 Report Share Posted August 5, 2009 For Beck type treatments the closer you are to 1 hertz (cycle per second) the more effective it is. see http://www.geocities.com/a57ngel/bioelectric/eng/transfection.html Recent research done on frequencies destroying viruses show that it takes up in the gigahertz (thousands of millions of hertz) to do the job. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.